For projects in Belgium
Venue and restaurant acoustics in Belgium
Two different jobs that get quoted as one: keeping bass inside the building for the neighbours, and making the room comfortable enough that guests can talk. Solving one does nothing for the other. Church buildings, civic halls and converted industrial spaces have long decay and hard surfaces.
- Containment
- Low frequency through structure to flats above and beside. Mass, decoupling and a sealed envelope.
- Table level comfort
- Absorption at the ceiling so guests stop raising their voices at each other.
- Entrance and service
- Doors, lobbies and extract paths, which is where most of the leakage actually is.
- Quote
- From a plan and a section, within 48 hours
01 / Start here
The product, described honestly, for a Belgium brief
Two different jobs that get quoted as one: keeping bass inside the building for the neighbours, and making the room comfortable enough that guests can talk. Solving one does nothing for the other.
Church buildings, civic halls and converted industrial spaces have long decay and hard surfaces.
Work reaching us from Belgium is mostly terraced housing, institutional and corporate offices, schools, clinics, restaurants, studios.
- Antwerp is the advantage The port is close to almost everywhere in the country, so the inland leg barely registers. That is the practical reason a factory in India competes well here.
- Terraced brick, shared on both sides Most housing shares a party wall left and right. Speech and impact noise move sideways, which is a mass and decoupling job rather than a treatment job.
- Institutional meeting spaces Offices built for meetings in several languages need speech privacy and clean intelligibility at the same time, which pulls the design in two directions unless the ceiling is handled properly.
- Containment Low frequency through structure to flats above and beside. Mass, decoupling and a sealed envelope.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for venue soundproofing are on the main product page. This page covers what that means for a project in Belgium.
Nightclub and venue soundproofing SoundBlanket mass loaded vinyl
02 / The build-up
How the layers stack, from the structure inwards
-
Layer 1
Soundproofing materials
The blocking side of the range taken together: mass loaded vinyl, resilient layers, cavity absorption and the build-ups they belong in. In Belgium, balanced mechanical ventilation in newer stock and radiators in older buildings, so duct noise depends on the age.
Resilient bar. Where a full independent leaf will not fit. Effective, and very easy to short circuit with one wrong screw.
-
Layer 2
Acoustic panels
The full absorber range rather than one product: plain PET felt, printed felt, grooved panels and fabric finishes, chosen by how the room is used and how it has to look. In Belgium, church buildings, civic halls and converted industrial spaces have long decay and hard surfaces.
Ceiling first. In most rooms the ceiling is the largest untreated surface and the cheapest square metre of result.
-
Layer 3
Wooden slat acoustic panels
Timber slats on an acoustic backing. In Belgium, school buildings are hard surfaced with long corridors, and refectories are consistently the loudest rooms.
Feature wall only. Slats where they are seen, plain felt elsewhere, to hold the budget where it shows.
Architects working in Belgium usually need the build-up before the product. We will draw the section and mark what does the work. See how we support architects.
03 / In this market
What the buildings in Belgium do to the specification
- Antwerp is the advantage
The port is close to almost everywhere in the country, so the inland leg barely registers. That is the practical reason a factory in India competes well here.
- Terraced brick, shared on both sides
Most housing shares a party wall left and right. Speech and impact noise move sideways, which is a mass and decoupling job rather than a treatment job.
- Institutional meeting spaces
Offices built for meetings in several languages need speech privacy and clean intelligibility at the same time, which pulls the design in two directions unless the ceiling is handled properly.
- Renovation, not new build
The structure usually stays. Build-ups have to fit the depth and finishes already there, so shallow and effective beats thick and theoretically better.
- Assembly and performance rooms
Church buildings, civic halls and converted industrial spaces have long decay and hard surfaces.
04 / Room by room
Where the money goes on a Belgium project
-
Containment
Low frequency through structure to flats above and beside. Mass, decoupling and a sealed envelope. The port is close to almost everywhere in the country, so the inland leg barely registers. That is the practical reason a factory in India competes well here.
- Acoustic panels, 9 to 24 mm, 1220 x 2440 mm standard, up to 2440 x 4270 mm, 1200 to 3600 GSM
- Wooden slat acoustic panels, 13-3, 14-2, 28-4 and 59-5
- Acoustic carpet and rugs, High density polyester
-
Table level comfort
Absorption at the ceiling so guests stop raising their voices at each other. Most housing shares a party wall left and right. Speech and impact noise move sideways, which is a mass and decoupling job rather than a treatment job.
- Acoustic panels, 1800 x 900 mm, image printed into the felt rather than onto a facing
- Wooden slat acoustic panels, 2440 x 192 mm and 2440 x 128 mm
- Acoustic carpet and rugs, Felt
-
Entrance and service
Doors, lobbies and extract paths, which is where most of the leakage actually is. Offices built for meetings in several languages need speech privacy and clean intelligibility at the same time, which pulls the design in two directions unless the ceiling is handled properly.
- Acoustic panels, Cut pattern in PET felt, adds visual rhythm without changing the absorber
- Wooden slat acoustic panels, 14, 16 and 18 mm
- Acoustic carpet and rugs, 64 sq ft per pack
If the visual is fixed and the room still has to perform, that is a solvable problem and a conversation worth having early. See how we work with interior designers.
04 / Climate and durability
Why the climate in Belgium changes the material, not the target
Belgium is cool and damp, with long heating seasons and cold external walls, and that narrows the material list before acoustics is discussed.
Cold wall build-ups and long heating seasons mean interstitial condensation is a real risk behind any lining. PET felt is unaffected by damp air and will not feed mould where a fabric-faced mineral product would.
The failure we design against here is condensation behind linings in older, poorly insulated stock.
Consultants get the raw data, not a sales sheet. That is the whole of our side of the job, and it is set out under working with acoustic consultants.
06 / Straight talk
The six errors that cost the most
-
Panels on the wall as a neighbour noise solution
This is the one that comes back as a second fit-out rather than a snag.
-
A lobby with both doors able to open at once
A gap undoes the partition it sits in. Sealing is the cheapest line on the quote and the first one to get cut.
-
Extract ducting that bypasses every wall you built
Noise with a source is fixed at the source. Treating the receiving room is the expensive way to get a small result.
-
Treating it as a generic Belgium job
The port is close to almost everywhere in the country, so the inland leg barely registers. That is the practical reason a factory in India competes well here.
05 / Supply
What the route into Belgium actually looks like
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Antwerp, then a short road run to site |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Antwerp |
| Support | Drawings, build-ups, BOQ and material that arrives complete |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Sea freight into Antwerp, then a short road run to site. Air freight for samples and urgent quantities.
Questions from Belgium projects
What makes venue and restaurant acoustics different in Belgium?
Church buildings, civic halls and converted industrial spaces have long decay and hard surfaces. The port is close to almost everywhere in the country, so the inland leg barely registers. That is the practical reason a factory in India competes well here.
Where should the budget go first on a Belgium project?
Containment. Low frequency through structure to flats above and beside. Mass, decoupling and a sealed envelope. Table level comfort. Absorption at the ceiling so guests stop raising their voices at each other.
Do you have an office or installation team in Belgium?
No. We manufacture in India and supply into Belgium. We give you drawings, build-ups, a BOQ and material that arrives complete, and we will tell you plainly when a job needs a local contractor we cannot be.
How does material get to a Belgium site?
ships from: Palwal, Haryana, India, arrives at: Antwerp, then a short road run to site, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
What goes wrong most often on this kind of project?
Panels on the wall as a neighbour noise solution. A lobby with both doors able to open at once.
What do you need from us to quote?
A plan, a section through the critical partition or ceiling, and what the room is for. From that we can give a build-up and a BOQ rather than a price per square foot.
Next step
Tell us the room, we will tell you the build-up
A plan and a section is enough. We will come back with a build-up, a BOQ and a delivered date, and we will say so if what you are asking for will not work.