Manufactured in India, supplied in Belgium
Acoustic panels in Belgium
We manufacture acoustic panels at our own plant at Palwal in Haryana, India, and supply them into Belgium. Made at our own plant in India and shipped into Antwerp, one of the shortest port to site runs anywhere in Europe, which shows up directly in the landed cost.
- Plain PET felt
- 9 to 24 mm, 1220 x 2440 mm standard, up to 2440 x 4270 mm, 1200 to 3600 GSM
- Printed felt
- 1800 x 900 mm, image printed into the felt rather than onto a facing
- Grooved panels
- Cut pattern in PET felt, adds visual rhythm without changing the absorber
- Test standard
- ASTM C423
- Lead time
- 4 to 7 working days standard
- Minimum order
- From 10 panels
- ASTM C423
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
This comes from our own plant, not a trading desk. We do not have an office in your city and we will not invent one. What we can give you is factory pricing, consistent material and a technical answer before you commit.
01 / The material
What this is, and what it changes in a Belgium room
The full absorber range rather than one product: plain PET felt, printed felt, grooved panels and fabric finishes, chosen by how the room is used and how it has to look.
Work reaching us from Belgium is mostly terraced housing, institutional and corporate offices, schools, clinics, restaurants, studios.
Narrow terraced houses sharing party walls, with timber upper floors and concrete below. Apartment stock is concrete with hard finishes.
- Wall array Panels placed at first reflection points rather than spread evenly. Fewer panels, better result.
- Ceiling first In most rooms the ceiling is the largest untreated surface and the cheapest square metre of result.
- Mixed finish Plain felt where it is out of eye line, printed or grooved where it is seen.
- What it will not do Coverage is not the target, reverberation time is. Lining every surface wastes money and can leave a room sounding dead and unpleasant.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for our acoustic panel range are on the main product page. This page covers what that means for a project in Belgium.
PET felt acoustic panels Printed acoustic felt panels Grooved PET panels
02 / Specification
Published specification, identical wherever we ship it
These figures are published and they do not move. The thing worth arguing about is not the number on the sheet, it is which grade and which build-up suits the room you are treating.
- EchoCore 151500 GSM. General commercial
- EchoPro 181800 GSM. Rooms with a written RT target
- EchoMax 222200 GSM. High occupancy and high level spaces
| Plain PET felt | 9 to 24 mm, 1220 x 2440 mm standard, up to 2440 x 4270 mm, 1200 to 3600 GSM |
|---|---|
| Printed felt | 1800 x 900 mm, image printed into the felt rather than onto a facing |
| Grooved panels | Cut pattern in PET felt, adds visual rhythm without changing the absorber |
| Test standard | ASTM C423 |
On a Belgium job with a consultant involved, our part is material that matches the submitted data. See working with acoustic consultants.
03 / Local conditions
What the buildings in Belgium do to the specification
- Antwerp is the advantage
The port is close to almost everywhere in the country, so the inland leg barely registers. That is the practical reason a factory in India competes well here.
- Terraced brick, shared on both sides
Most housing shares a party wall left and right. Speech and impact noise move sideways, which is a mass and decoupling job rather than a treatment job.
- Institutional meeting spaces
Offices built for meetings in several languages need speech privacy and clean intelligibility at the same time, which pulls the design in two directions unless the ceiling is handled properly.
- Renovation, not new build
The structure usually stays. Build-ups have to fit the depth and finishes already there, so shallow and effective beats thick and theoretically better.
- School and campus buildings
School buildings are hard surfaced with long corridors, and refectories are consistently the loudest rooms.
- The studio and content scene
Rooms are fitted into terraces and converted industrial buildings where the party wall sets the limit.
If you are specifying for a Belgium project, we can give you a section, a BOQ and the honest limits of each layer. See how we support architects.
04 / Durability
Why the climate in Belgium changes the material, not the target
Belgium is cool and damp, with long heating seasons and cold external walls, and that narrows the sensible material list before acoustics is even discussed.
Cold wall build-ups and long heating seasons mean interstitial condensation is a real risk behind any lining. PET felt is unaffected by damp air and will not feed mould where a fabric-faced mineral product would.
The risk we design against here is condensation behind linings in older, poorly insulated stock.
Designers get colour, pattern and CNC options with the absorption figure attached to each. See how we work with interior designers.
05 / Getting it there
What the route into Belgium actually looks like
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Antwerp, then a short road run to site |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Antwerp |
| Packing | Palletised flat and film wrapped. Printed panels interleaved and corner protected. |
| Lead time | 4 to 7 working days standard. Printed and grooved take longer. |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Sea freight into Antwerp, then a short road run to site. Air freight for samples and urgent quantities.
200 panels for a trial order, in any mix of thickness, GSM and colour. Beyond a trial we would rather quote a container load.
| Trial order | 200 panels, 6,400 sq ft, mixed thickness, GSM and colour |
|---|---|
| Recommended | Full container |
A panel is 1220 x 2440 mm, which is 32 sq ft.
06 / Worth knowing
Where this goes wrong, said plainly
-
The wrong product for the problem
Coverage is not the target, reverberation time is. Lining every surface wastes money and can leave a room sounding dead and unpleasant. We would rather calculate the area than sell the wall.
-
Coverage bought instead of a target
Lining every surface is a purchase, not a result. We would rather calculate the area against a reverberation target and sell you less of it.
-
A claim of being local to Belgium
We manufacture in India and supply here. We do not run an office in this city and we will not pretend to, because you would find out on the first site visit.
07 / In projects
The product on finished jobs
Belgium: questions we are actually asked
Do you manufacture acoustic panels in Belgium?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Belgium as the manufacturer rather than through a dealer. Made at our own plant in India and shipped into Antwerp, one of the shortest port to site runs anywhere in Europe, which shows up directly in the landed cost. You buy at factory prices with one consistent batch across the order.
Why would a Belgium build-up differ from anywhere else?
The port is close to almost everywhere in the country, so the inland leg barely registers. That is the practical reason a factory in India competes well here. Most housing shares a party wall left and right. Speech and impact noise move sideways, which is a mass and decoupling job rather than a treatment job. Those two things move the build-up far more than the panel figure does.
Does Belgium weather shorten the life of this material?
Belgium is cool and damp, with long heating seasons and cold external walls. Cold wall build-ups and long heating seasons mean interstitial condensation is a real risk behind any lining. PET felt is unaffected by damp air and will not feed mould where a fabric-faced mineral product would. The failure we design against here is condensation behind linings in older, poorly insulated stock.
When would material land on a Belgium site?
ships from: Palwal, Haryana, India, arrives at: Antwerp, then a short road run to site, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
What should you not buy acoustic panels for?
Coverage is not the target, reverberation time is. Lining every surface wastes money and can leave a room sounding dead and unpleasant. We would rather calculate the area than sell the wall.
Is there a minimum order, and how does it arrive?
200 panels for a trial order, in any mix of thickness, GSM and colour. Beyond a trial we would rather quote a container load. Trial order, 200 panels, 6,400 sq ft, mixed thickness, GSM and colour. Recommended, Full container. A panel is 1220 x 2440 mm, which is 32 sq ft. Palletised flat and film wrapped. Printed panels interleaved and corner protected.
Next step
Send the drawings, get a straight answer
A plan and a section is enough. We will come back with a build-up, a BOQ and a delivered date, and we will say so if what you are asking for will not work.