Manufactured in India, supplied in Belgium
PET felt acoustic panels in Belgium
We manufacture PET felt acoustic panels at our own plant at Palwal in Haryana, India, and supply them into Belgium. Made at our own plant in India and shipped into Antwerp, one of the shortest port to site runs anywhere in Europe, which shows up directly in the landed cost.
- Material
- 100% PET non-woven, no added binder
- Thickness
- 9, 12, 18 and 24 mm standard, tolerance plus or minus 5 percent
- Custom thickness
- 4 to 24 mm
- Panel size
- 1220 x 2440 mm standard, 4 x 8 ft
- Maximum size
- 2440 x 4270 mm, 2.44 x 4.27 m, 8 x 14 ft
- Lead time
- 4 to 7 working days for standard colours and thicknesses
- Minimum order
- From 10 panels
- ASTM C423
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
This comes from our own plant, not a trading desk. We do not have an office in your city and we will not invent one. What we can give you is factory pricing, consistent material and a technical answer before you commit.
01 / What it is
The product, described honestly, for a Belgium brief
A rigid non-woven panel pressed from 100% polyester fibre, a large part of it recycled. It absorbs mid and high frequency energy and finishes as the visible surface, so it is both the acoustic layer and the finish.
Work reaching us from Belgium is mostly terraced housing, institutional and corporate offices, schools, clinics, restaurants, studios.
Narrow terraced houses sharing party walls, with timber upper floors and concrete below. Apartment stock is concrete with hard finishes.
- Direct to wall Panel bonded or mechanically fixed flat to the substrate. Simplest, and the weakest at low frequency.
- On a 25 to 50 mm air gap The same panel on battens. The air gap moves absorption down in frequency at no extra material cost, and is the cheapest improvement available.
- Over a porous backing Panel over mineral or PET backing where the room needs genuine low mid control.
- What it will not do It absorbs. It does not block.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for PET felt panels are on the main product page. This page covers what that means for a project in Belgium.
02 / Specification sheet
Published specification, identical wherever we ship it
We publish one data sheet for every market. If a supplier quotes you a different figure for the same product in a different city, one of the two numbers is wrong.
- EchoCore 151500 GSM. Offices, classrooms, general commercial
- EchoPro 181800 GSM. Studios, auditoria, rooms with a written RT target
- EchoMax 222200 GSM. High occupancy and high level spaces
| Material | 100% PET non-woven, no added binder |
|---|---|
| Thickness | 9, 12, 18 and 24 mm standard, tolerance plus or minus 5 percent |
| Custom thickness | 4 to 24 mm |
| Panel size | 1220 x 2440 mm standard, 4 x 8 ft |
| Maximum size | 2440 x 4270 mm, 2.44 x 4.27 m, 8 x 14 ft |
| Density range | 1200 to 3600 GSM |
| NRC | 0.30 at 9 mm, rising with thickness and air gap |
| Test standard | ASTM C423 |
If a consultant has set the target, we will quote against their figures rather than ours, and stay out of the scope they own. More on working with acoustic consultants.
03 / What drives the brief
The Belgium conditions that change the answer
- Antwerp is the advantage
The port is close to almost everywhere in the country, so the inland leg barely registers. That is the practical reason a factory in India competes well here.
- Terraced brick, shared on both sides
Most housing shares a party wall left and right. Speech and impact noise move sideways, which is a mass and decoupling job rather than a treatment job.
- Institutional meeting spaces
Offices built for meetings in several languages need speech privacy and clean intelligibility at the same time, which pulls the design in two directions unless the ceiling is handled properly.
- Renovation, not new build
The structure usually stays. Build-ups have to fit the depth and finishes already there, so shallow and effective beats thick and theoretically better.
- School and campus buildings
School buildings are hard surfaced with long corridors, and refectories are consistently the loudest rooms.
For a Belgium practice, the useful thing is a detail you can put in a drawing set, not a brochure. See how we support architects.
04 / Climate
What the Belgium climate rules in and rules out
Belgium is cool and damp, with long heating seasons and cold external walls, and that narrows the sensible material list before acoustics is even discussed.
Cold wall build-ups and long heating seasons mean interstitial condensation is a real risk behind any lining. PET felt is unaffected by damp air and will not feed mould where a fabric-faced mineral product would.
The risk we design against here is condensation behind linings in older, poorly insulated stock.
Interior designers tend to arrive with the look already decided. We will tell you which finish gets there without losing the acoustics. See how we work with interior designers.
05 / Supply
How material reaches a Belgium site
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Antwerp, then a short road run to site |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Antwerp |
| Packing | Palletised flat and film wrapped, cut sheets interleaved. Packing list and weights issued with the quote. |
| Lead time | 4 to 7 working days for standard colours and thicknesses. Grooved and custom colours take longer, and we say so before you order. |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Sea freight into Antwerp, then a short road run to site. Air freight for samples and urgent quantities.
200 panels for a trial order, in any mix of thickness, GSM and colour. Beyond a trial we would rather quote a container load, because the price per panel and the freight per panel both fall sharply and a part load pays for space it does not use.
| Trial order | 200 panels, 6,400 sq ft, mixed thickness, GSM and colour |
|---|---|
| Recommended | Full container, for the best price per panel and the lowest freight per panel |
A panel is 1220 x 2440 mm, which is 32 sq ft.
06 / Worth knowing
Four honest warnings before you buy
-
The wrong product for the problem
It absorbs. It does not block. A PET panel on a shared wall will make the room sound better and will not stop the neighbour being heard. If the brief is stopping noise passing through a wall or floor, the answer is mass and decoupling, and we will say so before quoting.
-
A number chased without a measurement
If nobody has measured the room or set a target, the specification is a guess with a decimal point in it. We will ask for the target before we quote the quantity.
-
A claim of being local to Belgium
We manufacture in India and supply here. We do not run an office in this city and we will not pretend to, because you would find out on the first site visit.
Belgium: questions we are actually asked
Are these PET felt acoustic panels made in Belgium?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Belgium as the manufacturer rather than through a dealer. Made at our own plant in India and shipped into Antwerp, one of the shortest port to site runs anywhere in Europe, which shows up directly in the landed cost. You buy at factory prices with one consistent batch across the order.
What changes the specification on a Belgium job?
The port is close to almost everywhere in the country, so the inland leg barely registers. That is the practical reason a factory in India competes well here. Most housing shares a party wall left and right. Speech and impact noise move sideways, which is a mass and decoupling job rather than a treatment job. Those two things move the build-up far more than the panel figure does.
How does the Belgium climate affect this product?
Belgium is cool and damp, with long heating seasons and cold external walls. Cold wall build-ups and long heating seasons mean interstitial condensation is a real risk behind any lining. PET felt is unaffected by damp air and will not feed mould where a fabric-faced mineral product would. The failure we design against here is condensation behind linings in older, poorly insulated stock.
When would material land on a Belgium site?
ships from: Palwal, Haryana, India, arrives at: Antwerp, then a short road run to site, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
What will PET felt acoustic panels not do?
It absorbs. It does not block. A PET panel on a shared wall will make the room sound better and will not stop the neighbour being heard. If the brief is stopping noise passing through a wall or floor, the answer is mass and decoupling, and we will say so before quoting.
How is the order packed and what is the minimum?
200 panels for a trial order, in any mix of thickness, GSM and colour. Beyond a trial we would rather quote a container load, because the price per panel and the freight per panel both fall sharply and a part load pays for space it does not use. Trial order, 200 panels, 6,400 sq ft, mixed thickness, GSM and colour. Recommended, Full container, for the best price per panel and the lowest freight per panel. A panel is 1220 x 2440 mm, which is 32 sq ft. Palletised flat and film wrapped, cut sheets interleaved. Packing list and weights issued with the quote.
Next step
Send the drawings, get a straight answer
We quote from drawings, not from a square foot rate. Send a plan and the section through the critical wall or ceiling and you will get something you can actually build from.