Manufactured in India, supplied in Belgium
Soundproofing materials in Belgium
We manufacture soundproofing materials at our own plant at Palwal in Haryana, India, and supply them into Belgium. Made at our own plant in India and shipped into Antwerp, one of the shortest port to site runs anywhere in Europe, which shows up directly in the landed cost.
- SoundBlanket MLV
- 2100 kg per cubic metre. 2.5 mm STC 30 at 5.25 kg per sq m, 4 mm STC 34 at 8.4, 6 mm at 12.6
- BassBloc
- 1800 x 900 x 20 mm, 100 kg per cubic metre, NRC 0.85
- Principle
- Mass, then decoupling, then cavity absorption, then sealing
- Test standards
- ASTM E90 for the barrier, ASTM C423 for the absorber
- Lead time
- 4 to 7 working days for stock items
- ASTM E90 for the barrier, ASTM C423 for the absorber
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
Manufacturer, not reseller. We hold no local approvals and will not imply we do. You get the price the factory quotes, material that matches across a large order, and advice that sometimes talks you out of a purchase.
01 / What it is
The material, and what it actually does on a Belgium job
The blocking side of the range taken together: mass loaded vinyl, resilient layers, cavity absorption and the build-ups they belong in. This is the page for someone whose problem is noise getting through, not a room that sounds wrong.
Work reaching us from Belgium is mostly terraced housing, institutional and corporate offices, schools, clinics, restaurants, studios.
Narrow terraced houses sharing party walls, with timber upper floors and concrete below. Apartment stock is concrete with hard finishes.
- Independent leaf A second wall that does not touch the first. Nothing else comes close for the money.
- Resilient bar Where a full independent leaf will not fit. Effective, and very easy to short circuit with one wrong screw.
- Floating floor Resilient layer and deck, to break impact energy before it reaches the structure.
- What it will not do Soundproofing fails at the gaps, not the materials. A service penetration, a back to back socket, or a door undercut will undo a correctly built wall.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for our soundproofing materials are on the main product page. This page covers what that means for a project in Belgium.
SoundBlanket mass loaded vinyl BassBloc sound absorber Wall soundproofing systems
02 / Specification
The published figures, unchanged by location
We publish one data sheet for every market. If a supplier quotes you a different figure for the same product in a different city, one of the two numbers is wrong.
- Light retrofit2.5 mm membrane. Where depth is not available
- Standard partition4 mm membrane on an independent leaf. The common specification
- Heavy6 mm membrane and full decoupling. Plant, machine enclosure, low frequency
| SoundBlanket MLV | 2100 kg per cubic metre. 2.5 mm STC 30 at 5.25 kg per sq m, 4 mm STC 34 at 8.4, 6 mm at 12.6 |
|---|---|
| BassBloc | 1800 x 900 x 20 mm, 100 kg per cubic metre, NRC 0.85 |
| Principle | Mass, then decoupling, then cavity absorption, then sealing |
| Test standards | ASTM E90 for the barrier, ASTM C423 for the absorber |
Where a consultant is already engaged on a Belgium project, we supply to their specification and send the test reports rather than describing them. More on working with acoustic consultants.
03 / In this market
The Belgium conditions that change the answer
- Antwerp is the advantage
The port is close to almost everywhere in the country, so the inland leg barely registers. That is the practical reason a factory in India competes well here.
- Terraced brick, shared on both sides
Most housing shares a party wall left and right. Speech and impact noise move sideways, which is a mass and decoupling job rather than a treatment job.
- Institutional meeting spaces
Offices built for meetings in several languages need speech privacy and clean intelligibility at the same time, which pulls the design in two directions unless the ceiling is handled properly.
- Renovation, not new build
The structure usually stays. Build-ups have to fit the depth and finishes already there, so shallow and effective beats thick and theoretically better.
- Plant and HVAC
Balanced mechanical ventilation in newer stock and radiators in older buildings, so duct noise depends on the age.
- The housing stock
Narrow terraced houses sharing party walls, with timber upper floors and concrete below. Apartment stock is concrete with hard finishes.
Architects working in Belgium usually need the build-up before the product. We will draw the section and mark what does the work. See how we support architects.
04 / Durability
What the Belgium climate rules in and rules out
Belgium is cool and damp, with long heating seasons and cold external walls, and that narrows the sensible material list before acoustics is even discussed.
Cold wall build-ups and long heating seasons mean interstitial condensation is a real risk behind any lining. PET felt is unaffected by damp air and will not feed mould where a fabric-faced mineral product would.
The risk we design against here is condensation behind linings in older, poorly insulated stock.
Interior designers tend to arrive with the look already decided. We will tell you which finish gets there without losing the acoustics. See how we work with interior designers.
05 / Route to site
What the route into Belgium actually looks like
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Antwerp, then a short road run to site |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Antwerp |
| Packing | Rolls on core tubes, boards palletised, fixings and tapes listed on the same packing list. |
| Lead time | 4 to 7 working days for stock items. |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Sea freight into Antwerp, then a short road run to site. Air freight for samples and urgent quantities.
06 / Worth knowing
Where this goes wrong, said plainly
-
The wrong product for the problem
Soundproofing fails at the gaps, not the materials. A service penetration, a back to back socket, or a door undercut will undo a correctly built wall. We would rather spend the conversation on the detail than on the product.
-
Square footage quoted before the room is understood
Anyone can price a wall. Working out how much material the room actually needs usually reduces the order, which is why not everyone does it.
-
Suppliers who imply a Belgium presence
Ask any supplier where the material is made and who carries the warranty. We make it at Palwal in Haryana and we say so on every page, including this one.
07 / In projects
The product on finished jobs
Belgium: questions we are actually asked
Do you manufacture soundproofing materials in Belgium?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Belgium as the manufacturer rather than through a dealer. Made at our own plant in India and shipped into Antwerp, one of the shortest port to site runs anywhere in Europe, which shows up directly in the landed cost. You buy at factory prices with one consistent batch across the order.
What changes the specification on a Belgium job?
The port is close to almost everywhere in the country, so the inland leg barely registers. That is the practical reason a factory in India competes well here. Most housing shares a party wall left and right. Speech and impact noise move sideways, which is a mass and decoupling job rather than a treatment job. Those two things move the build-up far more than the panel figure does.
How does the Belgium climate affect this product?
Belgium is cool and damp, with long heating seasons and cold external walls. Cold wall build-ups and long heating seasons mean interstitial condensation is a real risk behind any lining. PET felt is unaffected by damp air and will not feed mould where a fabric-faced mineral product would. The failure we design against here is condensation behind linings in older, poorly insulated stock.
How does an order actually travel to Belgium?
ships from: Palwal, Haryana, India, arrives at: Antwerp, then a short road run to site, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
What will soundproofing materials not do?
Soundproofing fails at the gaps, not the materials. A service penetration, a back to back socket, or a door undercut will undo a correctly built wall. We would rather spend the conversation on the detail than on the product.
How is the order packed and what is the minimum?
Minimum order is confirmed with the quote. Rolls on core tubes, boards palletised, fixings and tapes listed on the same packing list.
Next step
Drawings in, BOQ and a delivered date out
A plan and a section is enough. We will come back with a build-up, a BOQ and a delivered date, and we will say so if what you are asking for will not work.