Home > Azerbaijan > PET felt acoustic panels
Manufactured in India, supplied in Azerbaijan
PET felt acoustic panels in Azerbaijan
We manufacture PET felt acoustic panels at our own plant at Palwal in Haryana, India, and supply them into Azerbaijan. Made at our own plant in India and shipped into Poti on the Black Sea, then road across Georgia into Azerbaijan.
- Material
- 100% PET non-woven, no added binder
- Thickness
- 9, 12, 18 and 24 mm standard, tolerance plus or minus 5 percent
- Custom thickness
- 4 to 24 mm
- Panel size
- 1220 x 2440 mm standard, 4 x 8 ft
- Maximum size
- 2440 x 4270 mm, 2.44 x 4.27 m, 8 x 14 ft
- Lead time
- 4 to 7 working days for standard colours and thicknesses
- Minimum order
- From 10 panels
- ASTM C423
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
We make this ourselves and ship it to you. No local branch, no borrowed certifications, no dealer margin. One batch across the whole order, and an honest answer when the product is wrong for the problem.
01 / Start here
The product, described honestly, for a Azerbaijan brief
A rigid non-woven panel pressed from 100% polyester fibre, a large part of it recycled. It absorbs mid and high frequency energy and finishes as the visible surface, so it is both the acoustic layer and the finish.
Work reaching us from Azerbaijan is mostly corporate and energy sector offices, hotels, apartment towers, hospitals, schools, venues.
Soviet era panel blocks and newer concrete towers, both with hard floors and slabs that pass impact noise.
- Direct to wall Panel bonded or mechanically fixed flat to the substrate. Simplest, and the weakest at low frequency.
- On a 25 to 50 mm air gap The same panel on battens. The air gap moves absorption down in frequency at no extra material cost, and is the cheapest improvement available.
- Over a porous backing Panel over mineral or PET backing where the room needs genuine low mid control.
- What it will not do It absorbs. It does not block.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for PET felt panels are on the main product page. This page covers what that means for a project in Azerbaijan.
02 / Specification sheet
The published figures, unchanged by location
We publish one data sheet for every market. If a supplier quotes you a different figure for the same product in a different city, one of the two numbers is wrong.
- EchoCore 151500 GSM. Offices, classrooms, general commercial
- EchoPro 181800 GSM. Studios, auditoria, rooms with a written RT target
- EchoMax 222200 GSM. High occupancy and high level spaces
| Material | 100% PET non-woven, no added binder |
|---|---|
| Thickness | 9, 12, 18 and 24 mm standard, tolerance plus or minus 5 percent |
| Custom thickness | 4 to 24 mm |
| Panel size | 1220 x 2440 mm standard, 4 x 8 ft |
| Maximum size | 2440 x 4270 mm, 2.44 x 4.27 m, 8 x 14 ft |
| Density range | 1200 to 3600 GSM |
| NRC | 0.30 at 9 mm, rising with thickness and air gap |
| Test standard | ASTM C423 |
Where a consultant is already engaged on a Azerbaijan project, we supply to their specification and send the test reports rather than describing them. More on working with acoustic consultants.
03 / In this market
What the buildings in Azerbaijan do to the specification
- Energy sector offices
Corporate floors and operations centres where speech privacy is a requirement rather than a comfort.
- A route with several legs
Sea to the Black Sea, then road across a border. We quote each leg separately so the programme is built on real dates rather than a port arrival.
- Packing has to survive the run
A long overland leg on mixed surfaces is hard on a pallet. We brace and wrap for that rather than for a short port transfer.
- Wind and sealed buildings
Baku buildings stay closed against the wind, so mechanical noise accumulates inside instead of escaping.
- School and campus buildings
School buildings are hard surfaced with long corridors and gymnasiums doubling as halls.
If you are specifying for a Azerbaijan project, we can give you a section, a BOQ and the honest limits of each layer. See how we support architects.
04 / Climate and durability
The Azerbaijan climate decides the material list
Azerbaijan is mild summers and cold, wet winters, and that narrows the sensible material list before acoustics is even discussed.
Cold external walls and long heating seasons make condensation behind a lining the thing to design out. PET felt is unaffected by damp air.
The risk we design against here is condensation and cold bridging behind new linings.
Designers get colour, pattern and CNC options with the absorption figure attached to each. See how we work with interior designers.
05 / Supply
What the route into Azerbaijan actually looks like
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Poti, then road across Georgia into Azerbaijan |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Poti, then road |
| Packing | Palletised flat and film wrapped, cut sheets interleaved. Packing list and weights issued with the quote. |
| Lead time | 4 to 7 working days for standard colours and thicknesses. Grooved and custom colours take longer, and we say so before you order. |
Standard items dispatch in 4 to 7 working days. The sea leg from India is long, so plan the full door to door window into the programme. We give real dates, not optimistic ones.
Sea freight into Poti, then road across Georgia into Azerbaijan. Air freight for samples and urgent quantities.
200 panels for a trial order, in any mix of thickness, GSM and colour. Beyond a trial we would rather quote a container load, because the price per panel and the freight per panel both fall sharply and a part load pays for space it does not use.
| Trial order | 200 panels, 6,400 sq ft, mixed thickness, GSM and colour |
|---|---|
| Recommended | Full container, for the best price per panel and the lowest freight per panel |
A panel is 1220 x 2440 mm, which is 32 sq ft.
06 / Read this first
What we will tell you that a reseller will not
-
The wrong product for the problem
It absorbs. It does not block. A PET panel on a shared wall will make the room sound better and will not stop the neighbour being heard. If the brief is stopping noise passing through a wall or floor, the answer is mass and decoupling, and we will say so before quoting.
-
A number chased without a measurement
If nobody has measured the room or set a target, the specification is a guess with a decimal point in it. We will ask for the target before we quote the quantity.
-
A claim of being local to Azerbaijan
We manufacture in India and supply here. We do not run an office in this city and we will not pretend to, because you would find out on the first site visit.
Azerbaijan: questions we are actually asked
Are these PET felt acoustic panels made in Azerbaijan?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Azerbaijan as the manufacturer rather than through a dealer. Made at our own plant in India and shipped into Poti on the Black Sea, then road across Georgia into Azerbaijan. You buy at factory prices with one consistent batch across the order.
What decides the specification for a Azerbaijan project?
Sea to the Black Sea, then road across a border. We quote each leg separately so the programme is built on real dates rather than a port arrival. A long overland leg on mixed surfaces is hard on a pallet. We brace and wrap for that rather than for a short port transfer. Those two things move the build-up far more than the panel figure does.
Does Azerbaijan weather shorten the life of this material?
Azerbaijan is mild summers and cold, wet winters. Cold external walls and long heating seasons make condensation behind a lining the thing to design out. PET felt is unaffected by damp air. The failure we design against here is condensation and cold bridging behind new linings.
How does an order actually travel to Azerbaijan?
ships from: Palwal, Haryana, India, arrives at: Poti, then road across Georgia into Azerbaijan, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. The sea leg from India is long, so plan the full door to door window into the programme. We give real dates, not optimistic ones.
When are PET felt acoustic panels the wrong purchase?
It absorbs. It does not block. A PET panel on a shared wall will make the room sound better and will not stop the neighbour being heard. If the brief is stopping noise passing through a wall or floor, the answer is mass and decoupling, and we will say so before quoting.
How is the order packed and what is the minimum?
200 panels for a trial order, in any mix of thickness, GSM and colour. Beyond a trial we would rather quote a container load, because the price per panel and the freight per panel both fall sharply and a part load pays for space it does not use. Trial order, 200 panels, 6,400 sq ft, mixed thickness, GSM and colour. Recommended, Full container, for the best price per panel and the lowest freight per panel. A panel is 1220 x 2440 mm, which is 32 sq ft. Palletised flat and film wrapped, cut sheets interleaved. Packing list and weights issued with the quote.
Next step
Send a plan and a section, get a real build-up
A plan and a section is enough. We will come back with a build-up, a BOQ and a delivered date, and we will say so if what you are asking for will not work.