Home > Azerbaijan > Wooden slat acoustic panels
Manufactured in India, supplied in Azerbaijan
Wooden slat acoustic panels in Azerbaijan
We manufacture wooden slat acoustic panels at our own plant at Palwal in Haryana, India, and supply them into Azerbaijan. Made at our own plant in India and shipped into Poti on the Black Sea, then road across Georgia into Azerbaijan.
- Substrate
- MDF, FR MDF, HDF or HDHMR
- Patterns
- 13-3, 14-2, 28-4 and 59-5
- Panel sizes
- 2440 x 192 mm and 2440 x 128 mm
- Thickness
- 14, 16 and 18 mm
- Coverage
- 96 sq ft per unit
- Lead time
- Longer than felt
- Minimum order
- 500 sq ft, about 46 sq m
- EN 13501-1 Class B s1 d0 on FR substrate
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
Manufacturer, not reseller. We hold no local approvals and will not imply we do. You get the price the factory quotes, material that matches across a large order, and advice that sometimes talks you out of a purchase.
01 / Start here
What this is, and what it changes in a Azerbaijan room
Timber slats on an acoustic backing. The slats are the finish and the rhythm, the backing does the absorbing. Used where the room has to look considered rather than treated.
Work reaching us from Azerbaijan is mostly corporate and energy sector offices, hotels, apartment towers, hospitals, schools, venues.
Soviet era panel blocks and newer concrete towers, both with hard floors and slabs that pass impact noise.
- Slats on felt backing The standard. Absorption comes from the backing behind the gaps, so the slat gap ratio is an acoustic decision, not only a visual one.
- Slats on a cavity Backing plus an air gap behind moves absorption lower, which matters in music rooms.
- Feature wall only Slats where they are seen, plain felt elsewhere, to hold the budget where it shows.
- What it will not do A tight slat pattern looks denser but absorbs less, because the open area is what lets sound reach the backing. If the visual you want and the RT target you need pull apart, we will tell you which one the pattern is serving.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for wooden slat panels are on the main product page. This page covers what that means for a project in Azerbaijan.
02 / Specification sheet
The numbers, and they do not move by city
We publish one data sheet for every market. If a supplier quotes you a different figure for the same product in a different city, one of the two numbers is wrong.
- MDFStandard. Dry interiors, general commercial
- FR MDFFire rated. Public buildings and anywhere the specification calls for a class
- HDHMRMoisture resistant. Humid climates and rooms that see damp
| Substrate | MDF, FR MDF, HDF or HDHMR |
|---|---|
| Patterns | 13-3, 14-2, 28-4 and 59-5 |
| Panel sizes | 2440 x 192 mm and 2440 x 128 mm |
| Thickness | 14, 16 and 18 mm |
| Coverage | 96 sq ft per unit |
| Fire class | EN 13501-1 Class B s1 d0 on FR substrate |
On a Azerbaijan job with a consultant involved, our part is material that matches the submitted data. See working with acoustic consultants.
03 / In this market
What decides the build-up in Azerbaijan
- Energy sector offices
Corporate floors and operations centres where speech privacy is a requirement rather than a comfort.
- A route with several legs
Sea to the Black Sea, then road across a border. We quote each leg separately so the programme is built on real dates rather than a port arrival.
- Packing has to survive the run
A long overland leg on mixed surfaces is hard on a pallet. We brace and wrap for that rather than for a short port transfer.
- Wind and sealed buildings
Baku buildings stay closed against the wind, so mechanical noise accumulates inside instead of escaping.
- Assembly and performance rooms
Mosques, civic halls and auditoria are tall hard volumes with long reverberation.
We would rather argue about the build-up at design stage than on site. See how we support architects.
04 / Climate and durability
What the Azerbaijan climate rules in and rules out
Azerbaijan is mild summers and cold, wet winters, and that narrows the sensible material list before acoustics is even discussed.
Cold external walls and long heating seasons make condensation behind a lining the thing to design out. PET felt is unaffected by damp air.
The risk we design against here is condensation and cold bridging behind new linings.
Interior designers tend to arrive with the look already decided. We will tell you which finish gets there without losing the acoustics. See how we work with interior designers.
05 / Supply
Getting it to Azerbaijan, with real dates
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Poti, then road across Georgia into Azerbaijan |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Poti, then road |
| Packing | Braced crates, slats supported along their length. Timber moves, so crates are kept flat and dry. |
| Lead time | Longer than felt. Confirmed against the pattern and substrate at quote stage. |
Standard items dispatch in 4 to 7 working days. The sea leg from India is long, so plan the full door to door window into the programme. We give real dates, not optimistic ones.
Sea freight into Poti, then road across Georgia into Azerbaijan. Air freight for samples and urgent quantities.
The same 500 sq ft minimum applies on export.
| Any specification | 500 sq ft, about 46 sq m |
|---|
One unit covers 96 sq ft, so the minimum is a little over five units. Substrate, slat pattern, width and thickness can be mixed inside the same order.
06 / Straight talk
What we will tell you that a reseller will not
-
The wrong product for the problem
A tight slat pattern looks denser but absorbs less, because the open area is what lets sound reach the backing. If the visual you want and the RT target you need pull apart, we will tell you which one the pattern is serving.
-
Coverage bought instead of a target
Lining every surface is a purchase, not a result. We would rather calculate the area against a reverberation target and sell you less of it.
-
Local approvals that nobody actually holds
We hold no Azerbaijan certification and we will not borrow one. The test data we publish is ours, and we will send the reports rather than describe them.
Azerbaijan: questions we are actually asked
Are these wooden slat acoustic panels made in Azerbaijan?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Azerbaijan as the manufacturer rather than through a dealer. Made at our own plant in India and shipped into Poti on the Black Sea, then road across Georgia into Azerbaijan. You buy at factory prices with one consistent batch across the order.
What decides the specification for a Azerbaijan project?
Sea to the Black Sea, then road across a border. We quote each leg separately so the programme is built on real dates rather than a port arrival. A long overland leg on mixed surfaces is hard on a pallet. We brace and wrap for that rather than for a short port transfer. Those two things move the build-up far more than the panel figure does.
Does Azerbaijan weather shorten the life of this material?
Azerbaijan is mild summers and cold, wet winters. Cold external walls and long heating seasons make condensation behind a lining the thing to design out. PET felt is unaffected by damp air. The failure we design against here is condensation and cold bridging behind new linings.
When would material land on a Azerbaijan site?
ships from: Palwal, Haryana, India, arrives at: Poti, then road across Georgia into Azerbaijan, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. The sea leg from India is long, so plan the full door to door window into the programme. We give real dates, not optimistic ones.
Where do wooden slat acoustic panels fail to help?
A tight slat pattern looks denser but absorbs less, because the open area is what lets sound reach the backing. If the visual you want and the RT target you need pull apart, we will tell you which one the pattern is serving.
What is the minimum order and how is it packed?
The same 500 sq ft minimum applies on export. Any specification, 500 sq ft, about 46 sq m. One unit covers 96 sq ft, so the minimum is a little over five units. Substrate, slat pattern, width and thickness can be mixed inside the same order. Braced crates, slats supported along their length. Timber moves, so crates are kept flat and dry.
Next step
Send the drawings, get a straight answer
A plan and a section is enough. We will come back with a build-up, a BOQ and a delivered date, and we will say so if what you are asking for will not work.