Home > Azerbaijan > Acoustic panels
Manufactured in India, supplied in Azerbaijan
Acoustic panels in Azerbaijan
We manufacture acoustic panels at our own plant at Palwal in Haryana, India, and supply them into Azerbaijan. Made at our own plant in India and shipped into Poti on the Black Sea, then road across Georgia into Azerbaijan.
- Plain PET felt
- 9 to 24 mm, 1220 x 2440 mm standard, up to 2440 x 4270 mm, 1200 to 3600 GSM
- Printed felt
- 1800 x 900 mm, image printed into the felt rather than onto a facing
- Grooved panels
- Cut pattern in PET felt, adds visual rhythm without changing the absorber
- Test standard
- ASTM C423
- Lead time
- 4 to 7 working days standard
- Minimum order
- From 10 panels
- ASTM C423
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
We make this ourselves and ship it to you. No local branch, no borrowed certifications, no dealer margin. One batch across the whole order, and an honest answer when the product is wrong for the problem.
01 / The product
What this material is and where it earns its place in Azerbaijan
The full absorber range rather than one product: plain PET felt, printed felt, grooved panels and fabric finishes, chosen by how the room is used and how it has to look.
Work reaching us from Azerbaijan is mostly corporate and energy sector offices, hotels, apartment towers, hospitals, schools, venues.
Soviet era panel blocks and newer concrete towers, both with hard floors and slabs that pass impact noise.
- Wall array Panels placed at first reflection points rather than spread evenly. Fewer panels, better result.
- Ceiling first In most rooms the ceiling is the largest untreated surface and the cheapest square metre of result.
- Mixed finish Plain felt where it is out of eye line, printed or grooved where it is seen.
- What it will not do Coverage is not the target, reverberation time is. Lining every surface wastes money and can leave a room sounding dead and unpleasant.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for our acoustic panel range are on the main product page. This page covers what that means for a project in Azerbaijan.
PET felt acoustic panels Printed acoustic felt panels Grooved PET panels
02 / Specification
The numbers, and they do not move by city
We publish one data sheet for every market. If a supplier quotes you a different figure for the same product in a different city, one of the two numbers is wrong.
- EchoCore 151500 GSM. General commercial
- EchoPro 181800 GSM. Rooms with a written RT target
- EchoMax 222200 GSM. High occupancy and high level spaces
| Plain PET felt | 9 to 24 mm, 1220 x 2440 mm standard, up to 2440 x 4270 mm, 1200 to 3600 GSM |
|---|---|
| Printed felt | 1800 x 900 mm, image printed into the felt rather than onto a facing |
| Grooved panels | Cut pattern in PET felt, adds visual rhythm without changing the absorber |
| Test standard | ASTM C423 |
If a consultant has set the target, we will quote against their figures rather than ours, and stay out of the scope they own. More on working with acoustic consultants.
03 / Local conditions
What we see driving Azerbaijan briefs
- Energy sector offices
Corporate floors and operations centres where speech privacy is a requirement rather than a comfort.
- A route with several legs
Sea to the Black Sea, then road across a border. We quote each leg separately so the programme is built on real dates rather than a port arrival.
- Packing has to survive the run
A long overland leg on mixed surfaces is hard on a pallet. We brace and wrap for that rather than for a short port transfer.
- Wind and sealed buildings
Baku buildings stay closed against the wind, so mechanical noise accumulates inside instead of escaping.
- School and campus buildings
School buildings are hard surfaced with long corridors and gymnasiums doubling as halls.
- The studio and content scene
A small broadcast and music sector working in rooms inside existing buildings.
If you are specifying for a Azerbaijan project, we can give you a section, a BOQ and the honest limits of each layer. See how we support architects.
04 / Climate and durability
Why the climate in Azerbaijan changes the material, not the target
Azerbaijan is mild summers and cold, wet winters, and that narrows the sensible material list before acoustics is even discussed.
Cold external walls and long heating seasons make condensation behind a lining the thing to design out. PET felt is unaffected by damp air.
The risk we design against here is condensation and cold bridging behind new linings.
For a Azerbaijan interior where the finish leads, we will say plainly what each option costs you acoustically. See how we work with interior designers.
05 / Logistics
Supply into Azerbaijan, start to site
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Poti, then road across Georgia into Azerbaijan |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Poti, then road |
| Packing | Palletised flat and film wrapped. Printed panels interleaved and corner protected. |
| Lead time | 4 to 7 working days standard. Printed and grooved take longer. |
Standard items dispatch in 4 to 7 working days. The sea leg from India is long, so plan the full door to door window into the programme. We give real dates, not optimistic ones.
Sea freight into Poti, then road across Georgia into Azerbaijan. Air freight for samples and urgent quantities.
200 panels for a trial order, in any mix of thickness, GSM and colour. Beyond a trial we would rather quote a container load.
| Trial order | 200 panels, 6,400 sq ft, mixed thickness, GSM and colour |
|---|---|
| Recommended | Full container |
A panel is 1220 x 2440 mm, which is 32 sq ft.
06 / Read this first
What we will tell you that a reseller will not
-
The wrong product for the problem
Coverage is not the target, reverberation time is. Lining every surface wastes money and can leave a room sounding dead and unpleasant. We would rather calculate the area than sell the wall.
-
Square footage quoted before the room is understood
Anyone can price a wall. Working out how much material the room actually needs usually reduces the order, which is why not everyone does it.
-
A claim of being local to Azerbaijan
We manufacture in India and supply here. We do not run an office in this city and we will not pretend to, because you would find out on the first site visit.
07 / In projects
The product on finished jobs
Azerbaijan: questions we are actually asked
Are these acoustic panels made in Azerbaijan?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Azerbaijan as the manufacturer rather than through a dealer. Made at our own plant in India and shipped into Poti on the Black Sea, then road across Georgia into Azerbaijan. You buy at factory prices with one consistent batch across the order.
What decides the specification for a Azerbaijan project?
Sea to the Black Sea, then road across a border. We quote each leg separately so the programme is built on real dates rather than a port arrival. A long overland leg on mixed surfaces is hard on a pallet. We brace and wrap for that rather than for a short port transfer. Those two things move the build-up far more than the panel figure does.
Is this the right material for Azerbaijan conditions?
Azerbaijan is mild summers and cold, wet winters. Cold external walls and long heating seasons make condensation behind a lining the thing to design out. PET felt is unaffected by damp air. The failure we design against here is condensation and cold bridging behind new linings.
How quickly can material reach a site in Azerbaijan?
ships from: Palwal, Haryana, India, arrives at: Poti, then road across Georgia into Azerbaijan, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. The sea leg from India is long, so plan the full door to door window into the programme. We give real dates, not optimistic ones.
Where do acoustic panels fail to help?
Coverage is not the target, reverberation time is. Lining every surface wastes money and can leave a room sounding dead and unpleasant. We would rather calculate the area than sell the wall.
What quantity do we have to order, and in what packaging?
200 panels for a trial order, in any mix of thickness, GSM and colour. Beyond a trial we would rather quote a container load. Trial order, 200 panels, 6,400 sq ft, mixed thickness, GSM and colour. Recommended, Full container. A panel is 1220 x 2440 mm, which is 32 sq ft. Palletised flat and film wrapped. Printed panels interleaved and corner protected.
Next step
Send the drawings, get a straight answer
We quote from drawings, not from a square foot rate. Send a plan and the section through the critical wall or ceiling and you will get something you can actually build from.