Home > Azerbaijan > Hospital and healthcare acoustics
For projects in Azerbaijan
Hospital and healthcare acoustics in Azerbaijan
Two duties at once: privacy where confidential conversations happen, and a lower noise floor where people are trying to rest. Hygiene and cleanability rule out a lot of products before acoustics is even discussed. Split units and central heating plant, with condensers on facades and in courtyards.
- Consulting room privacy
- Speech privacy between rooms, which is partition, door and ceiling void work.
- Ward noise floor
- Alarms, trolleys and staff conversation in hard corridors. Absorption at the ceiling.
- Cleanability
- Non shedding, non absorbent surfaces that survive a cleaning regime.
- Quote
- From a plan and a section, within 48 hours
01 / The product
What you are buying, and what it fixes in Azerbaijan
Two duties at once: privacy where confidential conversations happen, and a lower noise floor where people are trying to rest. Hygiene and cleanability rule out a lot of products before acoustics is even discussed.
Split units and central heating plant, with condensers on facades and in courtyards.
Work reaching us from Azerbaijan is mostly corporate and energy sector offices, hotels, apartment towers, hospitals, schools, venues.
- A route with several legs Sea to the Black Sea, then road across a border. We quote each leg separately so the programme is built on real dates rather than a port arrival.
- Packing has to survive the run A long overland leg on mixed surfaces is hard on a pallet. We brace and wrap for that rather than for a short port transfer.
- Energy sector offices Corporate floors and operations centres where speech privacy is a requirement rather than a comfort.
- Consulting room privacy Speech privacy between rooms, which is partition, door and ceiling void work.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for healthcare acoustics are on the main product page. This page covers what that means for a project in Azerbaijan.
02 / The build-up
What goes where, from the structure in
-
Layer 1
PET felt acoustic panels
A rigid non-woven panel pressed from 100% polyester fibre, a large part of it recycled. In Azerbaijan, split units and central heating plant, with condensers on facades and in courtyards.
Over a porous backing. Panel over mineral or PET backing where the room needs genuine low mid control.
-
Layer 2
Acoustic carpet and rugs
A tile carpet with a dense polyester face on a felt backing. In Azerbaijan, mosques, civic halls and auditoria are tall hard volumes with long reverberation.
Over a resilient underlay. Where impact noise to the floor below is the actual complaint, the underlay does that work, not the carpet.
-
Layer 3
Acoustic panels
The full absorber range rather than one product: plain PET felt, printed felt, grooved panels and fabric finishes, chosen by how the room is used and how it has to look. In Azerbaijan, school buildings are hard surfaced with long corridors and gymnasiums doubling as halls.
Ceiling first. In most rooms the ceiling is the largest untreated surface and the cheapest square metre of result.
Architects working in Azerbaijan usually need the build-up before the product. We will draw the section and mark what does the work. See how we support architects.
03 / In this market
The Azerbaijan conditions that change the answer
- A route with several legs
Sea to the Black Sea, then road across a border. We quote each leg separately so the programme is built on real dates rather than a port arrival.
- Packing has to survive the run
A long overland leg on mixed surfaces is hard on a pallet. We brace and wrap for that rather than for a short port transfer.
- Energy sector offices
Corporate floors and operations centres where speech privacy is a requirement rather than a comfort.
- Wind and sealed buildings
Baku buildings stay closed against the wind, so mechanical noise accumulates inside instead of escaping.
- Plant and HVAC
Split units and central heating plant, with condensers on facades and in courtyards.
04 / Room by room
Room by room, on a typical Azerbaijan job
-
Consulting room privacy
Speech privacy between rooms, which is partition, door and ceiling void work. Sea to the Black Sea, then road across a border. We quote each leg separately so the programme is built on real dates rather than a port arrival.
- PET felt acoustic panels, 100% PET non-woven, no added binder
- SoundBlanket mass loaded vinyl, STC 30, 5.25 kg per sq m
- Acoustic panels, Cut pattern in PET felt, adds visual rhythm without changing the absorber
-
Ward noise floor
Alarms, trolleys and staff conversation in hard corridors. Absorption at the ceiling. A long overland leg on mixed surfaces is hard on a pallet. We brace and wrap for that rather than for a short port transfer.
- PET felt acoustic panels, 9, 12, 18 and 24 mm standard, tolerance plus or minus 5 percent
- SoundBlanket mass loaded vinyl, STC 34, 8.4 kg per sq m
- Acoustic panels, ASTM C423
-
Cleanability
Non shedding, non absorbent surfaces that survive a cleaning regime. Corporate floors and operations centres where speech privacy is a requirement rather than a comfort.
- PET felt acoustic panels, 4 to 24 mm
- SoundBlanket mass loaded vinyl, 12.6 kg per sq m, STC on request
- Acoustic panels, 9 to 24 mm, 1220 x 2440 mm standard, up to 2440 x 4270 mm, 1200 to 3600 GSM
For a Azerbaijan interior where the finish leads, we will say plainly what each option costs you acoustically. See how we work with interior designers.
04 / Conditions
The Azerbaijan climate decides the material list
Azerbaijan is mild summers and cold, wet winters, and that narrows the material list before acoustics is discussed.
Cold external walls and long heating seasons make condensation behind a lining the thing to design out. PET felt is unaffected by damp air.
The failure we design against here is condensation and cold bridging behind new linings.
On a Azerbaijan job with a consultant involved, our part is material that matches the submitted data. See working with acoustic consultants.
06 / Straight talk
Six mistakes that turn into a second fit-out
-
Fabric wrapped products in a clinical area
Enclose the machine, break the vibration path, then deal with what is left. Doing it in the other order costs more and achieves less.
-
Absorption used where privacy was the requirement
If the complaint is being overheard, no amount of absorption inside the room will fix it. That is a partition job and we will say so.
-
Ceiling void left open above a partition
Square metre for square metre the ceiling is the cheapest result in the room. Skipping it and buying wall panels instead is the most common way to overspend.
-
Treating it as a generic Azerbaijan job
Sea to the Black Sea, then road across a border. We quote each leg separately so the programme is built on real dates rather than a port arrival.
05 / Getting it there
Supply into Azerbaijan, start to site
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Poti, then road across Georgia into Azerbaijan |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Poti, then road |
| Support | Drawings, build-ups, BOQ and material that arrives complete |
Standard items dispatch in 4 to 7 working days. The sea leg from India is long, so plan the full door to door window into the programme. We give real dates, not optimistic ones.
Sea freight into Poti, then road across Georgia into Azerbaijan. Air freight for samples and urgent quantities.
Questions from Azerbaijan projects
What makes hospital and healthcare acoustics different in Azerbaijan?
Split units and central heating plant, with condensers on facades and in courtyards. Sea to the Black Sea, then road across a border. We quote each leg separately so the programme is built on real dates rather than a port arrival.
Where should the budget go first on a Azerbaijan project?
Consulting room privacy. Speech privacy between rooms, which is partition, door and ceiling void work. Ward noise floor. Alarms, trolleys and staff conversation in hard corridors. Absorption at the ceiling.
Do you have an office or installation team in Azerbaijan?
No. We manufacture in India and supply into Azerbaijan. We give you drawings, build-ups, a BOQ and material that arrives complete, and we will tell you plainly when a job needs a local contractor we cannot be.
How does material get to a Azerbaijan site?
ships from: Palwal, Haryana, India, arrives at: Poti, then road across Georgia into Azerbaijan, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. The sea leg from India is long, so plan the full door to door window into the programme. We give real dates, not optimistic ones.
What goes wrong most often on this kind of project?
Fabric wrapped products in a clinical area. Absorption used where privacy was the requirement.
What do you need from us to quote?
A plan, a section through the critical partition or ceiling, and what the room is for. From that we can give a build-up and a BOQ rather than a price per square foot.
Next step
Tell us the room, we will tell you the build-up
A plan and a section is enough. We will come back with a build-up, a BOQ and a delivered date, and we will say so if what you are asking for will not work.