Manufactured in India, supplied in Argentina
Acoustic panels in Argentina
We manufacture acoustic panels at our own plant at Palwal in Haryana, India, and supply them into Argentina. Made at our own plant in India and shipped into Buenos Aires.
- Plain PET felt
- 9 to 24 mm, 1220 x 2440 mm standard, up to 2440 x 4270 mm, 1200 to 3600 GSM
- Printed felt
- 1800 x 900 mm, image printed into the felt rather than onto a facing
- Grooved panels
- Cut pattern in PET felt, adds visual rhythm without changing the absorber
- Test standard
- ASTM C423
- Lead time
- 4 to 7 working days standard
- Minimum order
- From 10 panels
- ASTM C423
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
We make this ourselves and ship it to you. No local branch, no borrowed certifications, no dealer margin. One batch across the whole order, and an honest answer when the product is wrong for the problem.
01 / The material
What this material is and where it earns its place in Argentina
The full absorber range rather than one product: plain PET felt, printed felt, grooved panels and fabric finishes, chosen by how the room is used and how it has to look.
Work reaching us from Argentina is mostly apartments and conversions, offices, restaurants, hotels, schools, clinics, studios.
Masonry and concrete blocks with hard floors and internal light wells that carry sound between flats.
- Wall array Panels placed at first reflection points rather than spread evenly. Fewer panels, better result.
- Ceiling first In most rooms the ceiling is the largest untreated surface and the cheapest square metre of result.
- Mixed finish Plain felt where it is out of eye line, printed or grooved where it is seen.
- What it will not do Coverage is not the target, reverberation time is. Lining every surface wastes money and can leave a room sounding dead and unpleasant.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for our acoustic panel range are on the main product page. This page covers what that means for a project in Argentina.
PET felt acoustic panels Printed acoustic felt panels Grooved PET panels
02 / Specification sheet
The published figures, unchanged by location
We publish one data sheet for every market. If a supplier quotes you a different figure for the same product in a different city, one of the two numbers is wrong.
- EchoCore 151500 GSM. General commercial
- EchoPro 181800 GSM. Rooms with a written RT target
- EchoMax 222200 GSM. High occupancy and high level spaces
| Plain PET felt | 9 to 24 mm, 1220 x 2440 mm standard, up to 2440 x 4270 mm, 1200 to 3600 GSM |
|---|---|
| Printed felt | 1800 x 900 mm, image printed into the felt rather than onto a facing |
| Grooved panels | Cut pattern in PET felt, adds visual rhythm without changing the absorber |
| Test standard | ASTM C423 |
Consultants get the raw data, not a sales sheet. That is the whole of our side of the job, and it is set out under working with acoustic consultants.
03 / On the ground
What the buildings in Argentina do to the specification
- Paperwork is part of the lead time
Import formalities take time here and pretending otherwise helps nobody. We prepare the documentation package before shipping rather than after.
- European style building stock
Tall rooms with hard plaster and timber floors between apartments. Footfall travels down, and the rooms hold sound for a long time.
- Conversions of older buildings
The structure usually stays, so build-ups have to be shallow and work within existing finishes.
- A long sea leg
This is one of our longest routes. Ordering to a real schedule matters, so we quote the full window.
- School and campus buildings
School buildings are hard surfaced with high ceilings and long corridors that carry every sound.
- The studio and content scene
A deep music, dubbing and production culture working inside apartment blocks and converted buildings.
Architects working in Argentina usually need the build-up before the product. We will draw the section and mark what does the work. See how we support architects.
04 / Climate
Durability in Argentina, before acoustics is discussed
Argentina is hot summers, mild winters and a distinct wet season, and that narrows the sensible material list before acoustics is even discussed.
PET felt handles the wet months without absorbing moisture or feeding mould. Timber and wood wool want a ventilated cavity and a stable indoor RH.
The risk we design against here is wet-season humidity behind linings.
Interior designers tend to arrive with the look already decided. We will tell you which finish gets there without losing the acoustics. See how we work with interior designers.
05 / Getting it there
How material reaches a Argentina site
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Buenos Aires, then road to site |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Buenos Aires |
| Packing | Palletised flat and film wrapped. Printed panels interleaved and corner protected. |
| Lead time | 4 to 7 working days standard. Printed and grooved take longer. |
Standard items dispatch in 4 to 7 working days. The sea leg from India is long, so plan the full door to door window into the programme. We give real dates, not optimistic ones.
Sea freight into Buenos Aires, then road to site. Air freight for samples and urgent quantities.
200 panels for a trial order, in any mix of thickness, GSM and colour. Beyond a trial we would rather quote a container load.
| Trial order | 200 panels, 6,400 sq ft, mixed thickness, GSM and colour |
|---|---|
| Recommended | Full container |
A panel is 1220 x 2440 mm, which is 32 sq ft.
06 / Read this first
What we will tell you that a reseller will not
-
The wrong product for the problem
Coverage is not the target, reverberation time is. Lining every surface wastes money and can leave a room sounding dead and unpleasant. We would rather calculate the area than sell the wall.
-
A number chased without a measurement
If nobody has measured the room or set a target, the specification is a guess with a decimal point in it. We will ask for the target before we quote the quantity.
-
A claim of being local to Argentina
We manufacture in India and supply here. We do not run an office in this city and we will not pretend to, because you would find out on the first site visit.
07 / In projects
The material in real interiors
Argentina: questions we are actually asked
Do you manufacture acoustic panels in Argentina?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Argentina as the manufacturer rather than through a dealer. Made at our own plant in India and shipped into Buenos Aires. You buy at factory prices with one consistent batch across the order.
What changes the specification on a Argentina job?
Import formalities take time here and pretending otherwise helps nobody. We prepare the documentation package before shipping rather than after. Tall rooms with hard plaster and timber floors between apartments. Footfall travels down, and the rooms hold sound for a long time. Those two things move the build-up far more than the panel figure does.
Will this material last in the Argentina climate?
Argentina is hot summers, mild winters and a distinct wet season. PET felt handles the wet months without absorbing moisture or feeding mould. Timber and wood wool want a ventilated cavity and a stable indoor RH. The failure we design against here is wet-season humidity behind linings.
How quickly can material reach a site in Argentina?
ships from: Palwal, Haryana, India, arrives at: Buenos Aires, then road to site, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. The sea leg from India is long, so plan the full door to door window into the programme. We give real dates, not optimistic ones.
When are acoustic panels the wrong purchase?
Coverage is not the target, reverberation time is. Lining every surface wastes money and can leave a room sounding dead and unpleasant. We would rather calculate the area than sell the wall.
What is the minimum order and how is it packed?
200 panels for a trial order, in any mix of thickness, GSM and colour. Beyond a trial we would rather quote a container load. Trial order, 200 panels, 6,400 sq ft, mixed thickness, GSM and colour. Recommended, Full container. A panel is 1220 x 2440 mm, which is 32 sq ft. Palletised flat and film wrapped. Printed panels interleaved and corner protected.
Next step
Drawings in, BOQ and a delivered date out
A plan and a section is enough. We will come back with a build-up, a BOQ and a delivered date, and we will say so if what you are asking for will not work.