Manufactured in India, supplied in Amsterdam
Ceiling baffles and clouds in Amsterdam
We manufacture ceiling baffles and clouds at our own plant at Palwal in Haryana, India, and supply them into Amsterdam. Made at our own plant in India and shipped into Rotterdam, roughly eighty kilometres from the city, so the inland leg stays short and the landed cost stays predictable.
- Material
- 100% PET non-woven, the panel family
- Thickness
- 9 to 24 mm
- Size
- Made to the drawing, standard and custom
- Exposure
- Both faces work, which is why suspended area outperforms the same area laid flat
- Test standard
- ASTM C423
- Lead time
- Confirmed against the drawing
- Minimum order
- 500 sq ft, about 46 sq m
- ASTM C423
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
We make this ourselves and ship it to you. No local branch, no borrowed certifications, no dealer margin. One batch across the whole order, and an honest answer when the product is wrong for the problem.
01 / The material
What this material is and where it earns its place in Amsterdam
PET felt suspended from the soffit, vertically as baffles or horizontally as clouds. It is how you treat a room with exposed services, where there is no ceiling to line.
Work reaching us from Amsterdam is mostly canal house apartments, hotels, offices in Zuid and Noord, studios, bars, clinics.
Narrow terraced houses and canal buildings share party walls, with timber floors upstairs and concrete below. Neighbours on both sides is the default condition.
- Vertical baffles Hung on edge in rows. Both faces absorb, so coverage figures based on plan area understate them.
- Horizontal clouds Flat rafts over the occupied zone, which also reflect early speech energy back down where it helps.
- Mixed with services Set out around ducts, trays and lighting rather than fighting them, coordinated from your reflected ceiling plan.
- What it will not do Baffles are efficient, not magic. In a very tall volume the height above the baffle line still rings, and the honest answer is either more area or accepting a higher RT, not a denser panel.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for baffles and clouds are on the main product page. This page covers what that means for a project in Amsterdam.
Acoustic ceiling baffles Acoustic ceiling clouds Acoustic ceiling tiles
02 / Data sheet
The published figures, unchanged by location
The specification below is the same everywhere we supply, because a specification that changed by city would not be a specification. What changes is which grade and build-up is the right buy, and that is what the rest of this page is about.
- EchoCore 151500 GSM. Offices, retail, general
- EchoPro 181800 GSM. Halls, atria, spaces with a target
- EchoMax 222200 GSM. High volume and high occupancy
| Material | 100% PET non-woven, the panel family |
|---|---|
| Thickness | 9 to 24 mm |
| Size | Made to the drawing, standard and custom |
| Exposure | Both faces work, which is why suspended area outperforms the same area laid flat |
| Test standard | ASTM C423 |
Where a consultant is already engaged on a Amsterdam project, we supply to their specification and send the test reports rather than describing them. More on working with acoustic consultants.
03 / In this market
What we see driving Amsterdam briefs
- Canal houses carry everything
Seventeenth century houses were built narrow and tall with timber floors on shared party walls. Footfall and speech travel down and sideways, which is why a resilient layer under the finish beats anything hung on a wall.
- Listed facades, internal fixes only
On a monument you cannot change the outside and often cannot change the structure. Everything has to be done from the inside, shallow, and ideally reversible.
- Venue noise limits are enforced
Amsterdam operators live with real decibel and low frequency conditions on their permits, and the low end is what gets them into trouble. Containment is not optional here, it is the licence.
- Recycled content gets asked first
Our PET felt is made from recycled bottle flake. In Dutch tenders that question comes before the acoustic one, and it is the easiest one for us to answer honestly.
- School and campus buildings
School buildings are well insulated and airtight with hard cleanable surfaces, so rooms stay live and ventilation noise is always present.
If you are specifying for a Amsterdam project, we can give you a section, a BOQ and the honest limits of each layer. See how we support architects.
04 / Durability
Why the climate in Amsterdam changes the material, not the target
Amsterdam is cool and damp, with long heating seasons and cold external walls, and that narrows the sensible material list before acoustics is even discussed.
Cold wall build-ups and long heating seasons mean interstitial condensation is a real risk behind any lining. PET felt is unaffected by damp air and will not feed mould where a fabric-faced mineral product would.
The risk we design against here is condensation behind linings in older, poorly insulated stock.
For a Amsterdam interior where the finish leads, we will say plainly what each option costs you acoustically. See how we work with interior designers.
05 / Getting it there
How material reaches a Amsterdam site
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Rotterdam, then a short road run into the city |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Rotterdam |
| Packing | Flat packed with fixings, sets labelled by row so the install sequence matches the drawing. |
| Lead time | Confirmed against the drawing. Standard sizes 4 to 7 working days. |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we tell you that before you order, not after.
Sea freight into Rotterdam, then road into Amsterdam. Being close to the port keeps the inland cost low. Air freight for samples and urgent quantities.
The same 500 sq ft minimum applies on export.
| Baffles and clouds | 500 sq ft, about 46 sq m |
|---|
Baffles and clouds are cut to the drawing, so the minimum is counted on finished panel area. Both faces of a hung baffle absorb, which is why coverage taken off a plan understates what the order actually does.
06 / Worth knowing
Four honest warnings before you buy
-
The wrong product for the problem
Baffles are efficient, not magic. In a very tall volume the height above the baffle line still rings, and the honest answer is either more area or accepting a higher RT, not a denser panel.
-
A number chased without a measurement
If nobody has measured the room or set a target, the specification is a guess with a decimal point in it. We will ask for the target before we quote the quantity.
-
A claim of being local to Amsterdam
We manufacture in India and supply here. We do not run an office in this city and we will not pretend to, because you would find out on the first site visit.
Amsterdam: questions we are actually asked
Is there a Amsterdam factory behind this product?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Amsterdam as the manufacturer rather than through a dealer. Made at our own plant in India and shipped into Rotterdam, roughly eighty kilometres from the city, so the inland leg stays short and the landed cost stays predictable. You buy at factory prices with one consistent batch across the order.
What changes the specification on a Amsterdam job?
Seventeenth century houses were built narrow and tall with timber floors on shared party walls. Footfall and speech travel down and sideways, which is why a resilient layer under the finish beats anything hung on a wall. On a monument you cannot change the outside and often cannot change the structure. Everything has to be done from the inside, shallow, and ideally reversible. Those two things move the build-up far more than the panel figure does.
How does the Amsterdam climate affect this product?
Amsterdam is cool and damp, with long heating seasons and cold external walls. Cold wall build-ups and long heating seasons mean interstitial condensation is a real risk behind any lining. PET felt is unaffected by damp air and will not feed mould where a fabric-faced mineral product would. The failure we design against here is condensation behind linings in older, poorly insulated stock.
What is the delivery time into Amsterdam?
ships from: Palwal, Haryana, India, arrives at: Rotterdam, then a short road run into the city, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we tell you that before you order, not after.
What will ceiling baffles and clouds not do?
Baffles are efficient, not magic. In a very tall volume the height above the baffle line still rings, and the honest answer is either more area or accepting a higher RT, not a denser panel.
How is the order packed and what is the minimum?
The same 500 sq ft minimum applies on export. Baffles and clouds, 500 sq ft, about 46 sq m. Baffles and clouds are cut to the drawing, so the minimum is counted on finished panel area. Both faces of a hung baffle absorb, which is why coverage taken off a plan understates what the order actually does. Flat packed with fixings, sets labelled by row so the install sequence matches the drawing.
Next step
Send the drawings, get a straight answer
A plan and a section is enough. We will come back with a build-up, a BOQ and a delivered date, and we will say so if what you are asking for will not work.