Manufactured in India, supplied in Amsterdam
Acoustic panels in Amsterdam
We manufacture acoustic panels at our own plant at Palwal in Haryana, India, and supply them into Amsterdam. Made at our own plant in India and shipped into Rotterdam, roughly eighty kilometres from the city, so the inland leg stays short and the landed cost stays predictable.
- Plain PET felt
- 9 to 24 mm, 1220 x 2440 mm standard, up to 2440 x 4270 mm, 1200 to 3600 GSM
- Printed felt
- 1800 x 900 mm, image printed into the felt rather than onto a facing
- Grooved panels
- Cut pattern in PET felt, adds visual rhythm without changing the absorber
- Test standard
- ASTM C423
- Lead time
- 4 to 7 working days standard
- Minimum order
- From 10 panels
- ASTM C423
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
This comes from our own plant, not a trading desk. We do not have an office in your city and we will not invent one. What we can give you is factory pricing, consistent material and a technical answer before you commit.
01 / What it is
The product, described honestly, for a Amsterdam brief
The full absorber range rather than one product: plain PET felt, printed felt, grooved panels and fabric finishes, chosen by how the room is used and how it has to look.
Work reaching us from Amsterdam is mostly canal house apartments, hotels, offices in Zuid and Noord, studios, bars, clinics.
Narrow terraced houses and canal buildings share party walls, with timber floors upstairs and concrete below. Neighbours on both sides is the default condition.
- Wall array Panels placed at first reflection points rather than spread evenly. Fewer panels, better result.
- Ceiling first In most rooms the ceiling is the largest untreated surface and the cheapest square metre of result.
- Mixed finish Plain felt where it is out of eye line, printed or grooved where it is seen.
- What it will not do Coverage is not the target, reverberation time is. Lining every surface wastes money and can leave a room sounding dead and unpleasant.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for our acoustic panel range are on the main product page. This page covers what that means for a project in Amsterdam.
PET felt acoustic panels Printed acoustic felt panels Grooved PET panels
02 / Specification
The published figures, unchanged by location
The specification below is the same everywhere we supply, because a specification that changed by city would not be a specification. What changes is which grade and build-up is the right buy, and that is what the rest of this page is about.
- EchoCore 151500 GSM. General commercial
- EchoPro 181800 GSM. Rooms with a written RT target
- EchoMax 222200 GSM. High occupancy and high level spaces
| Plain PET felt | 9 to 24 mm, 1220 x 2440 mm standard, up to 2440 x 4270 mm, 1200 to 3600 GSM |
|---|---|
| Printed felt | 1800 x 900 mm, image printed into the felt rather than onto a facing |
| Grooved panels | Cut pattern in PET felt, adds visual rhythm without changing the absorber |
| Test standard | ASTM C423 |
On a Amsterdam job with a consultant involved, our part is material that matches the submitted data. See working with acoustic consultants.
03 / On the ground
The Amsterdam conditions that change the answer
- Canal houses carry everything
Seventeenth century houses were built narrow and tall with timber floors on shared party walls. Footfall and speech travel down and sideways, which is why a resilient layer under the finish beats anything hung on a wall.
- Listed facades, internal fixes only
On a monument you cannot change the outside and often cannot change the structure. Everything has to be done from the inside, shallow, and ideally reversible.
- Venue noise limits are enforced
Amsterdam operators live with real decibel and low frequency conditions on their permits, and the low end is what gets them into trouble. Containment is not optional here, it is the licence.
- Recycled content gets asked first
Our PET felt is made from recycled bottle flake. In Dutch tenders that question comes before the acoustic one, and it is the easiest one for us to answer honestly.
- School and campus buildings
School buildings are well insulated and airtight with hard cleanable surfaces, so rooms stay live and ventilation noise is always present.
- The studio and content scene
Rooms are fitted into terraces and converted warehouses where the party wall decides what is achievable.
We would rather argue about the build-up at design stage than on site. See how we support architects.
04 / Climate
Durability in Amsterdam, before acoustics is discussed
Amsterdam is cool and damp, with long heating seasons and cold external walls, and that narrows the sensible material list before acoustics is even discussed.
Cold wall build-ups and long heating seasons mean interstitial condensation is a real risk behind any lining. PET felt is unaffected by damp air and will not feed mould where a fabric-faced mineral product would.
The risk we design against here is condensation behind linings in older, poorly insulated stock.
If the visual is fixed and the room still has to perform, that is a solvable problem and a conversation worth having early. See how we work with interior designers.
05 / Getting it there
What the route into Amsterdam actually looks like
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Rotterdam, then a short road run into the city |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Rotterdam |
| Packing | Palletised flat and film wrapped. Printed panels interleaved and corner protected. |
| Lead time | 4 to 7 working days standard. Printed and grooved take longer. |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we tell you that before you order, not after.
Sea freight into Rotterdam, then road into Amsterdam. Being close to the port keeps the inland cost low. Air freight for samples and urgent quantities.
200 panels for a trial order, in any mix of thickness, GSM and colour. Beyond a trial we would rather quote a container load.
| Trial order | 200 panels, 6,400 sq ft, mixed thickness, GSM and colour |
|---|---|
| Recommended | Full container |
A panel is 1220 x 2440 mm, which is 32 sq ft.
06 / Worth knowing
What we will tell you that a reseller will not
-
The wrong product for the problem
Coverage is not the target, reverberation time is. Lining every surface wastes money and can leave a room sounding dead and unpleasant. We would rather calculate the area than sell the wall.
-
Coverage bought instead of a target
Lining every surface is a purchase, not a result. We would rather calculate the area against a reverberation target and sell you less of it.
-
Suppliers who imply a Amsterdam presence
Ask any supplier where the material is made and who carries the warranty. We make it at Palwal in Haryana and we say so on every page, including this one.
07 / In projects
In finished rooms
Amsterdam: questions we are actually asked
Are these acoustic panels made in Amsterdam?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Amsterdam as the manufacturer rather than through a dealer. Made at our own plant in India and shipped into Rotterdam, roughly eighty kilometres from the city, so the inland leg stays short and the landed cost stays predictable. You buy at factory prices with one consistent batch across the order.
What decides the specification for a Amsterdam project?
Seventeenth century houses were built narrow and tall with timber floors on shared party walls. Footfall and speech travel down and sideways, which is why a resilient layer under the finish beats anything hung on a wall. On a monument you cannot change the outside and often cannot change the structure. Everything has to be done from the inside, shallow, and ideally reversible. Those two things move the build-up far more than the panel figure does.
Will this material last in the Amsterdam climate?
Amsterdam is cool and damp, with long heating seasons and cold external walls. Cold wall build-ups and long heating seasons mean interstitial condensation is a real risk behind any lining. PET felt is unaffected by damp air and will not feed mould where a fabric-faced mineral product would. The failure we design against here is condensation behind linings in older, poorly insulated stock.
What is the delivery time into Amsterdam?
ships from: Palwal, Haryana, India, arrives at: Rotterdam, then a short road run into the city, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we tell you that before you order, not after.
When are acoustic panels the wrong purchase?
Coverage is not the target, reverberation time is. Lining every surface wastes money and can leave a room sounding dead and unpleasant. We would rather calculate the area than sell the wall.
What quantity do we have to order, and in what packaging?
200 panels for a trial order, in any mix of thickness, GSM and colour. Beyond a trial we would rather quote a container load. Trial order, 200 panels, 6,400 sq ft, mixed thickness, GSM and colour. Recommended, Full container. A panel is 1220 x 2440 mm, which is 32 sq ft. Palletised flat and film wrapped. Printed panels interleaved and corner protected.
Next step
Send a plan and a section, get a real build-up
A plan and a section is enough. We will come back with a build-up, a BOQ and a delivered date, and we will say so if what you are asking for will not work.