Manufactured in India, supplied in Al Khobar
Wood wool acoustic panels in Al Khobar
We manufacture wood wool acoustic panels at our own plant at Palwal in Haryana, India, and supply them into Al Khobar. Made at our own plant in India and shipped into Dammam, which puts the port on the doorstep of most Eastern Province sites.
- Panel size
- 1200 x 600 mm
- Thickness
- 20 mm
- Density
- 400 kg per cubic metre
- NRC
- 0.30
- Test standards
- ASTM C-423 and EN ISO 354
- Lead time
- 4 to 7 working days for standard sizes
- Minimum order
- 500 sq ft, about 46 sq m
- ASTM C-423 and EN ISO 354
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
This comes from our own plant, not a trading desk. We do not have an office in your city and we will not invent one. What we can give you is factory pricing, consistent material and a technical answer before you commit.
01 / What it is
The material, and what it actually does on a Al Khobar job
Wood fibre bound into a rigid board with an open texture. Robust, paintable and used where the surface takes knocks, which is why it ends up in schools, sports halls and plant rooms.
Work reaching us from Al Khobar is mostly control rooms and plant, corporate offices, compound housing, hotels, clinics, schools.
Villas and apartment blocks are concrete and block with hard stone or tile throughout. Mass is there, but every room is live and impact noise between floors is untreated.
- Direct fix Mechanically fixed to the soffit or wall. Durable and simple.
- On a cavity Mounted on battens with an air gap, which is where the low mid performance comes from.
- With a porous backing Board over mineral backing where the room needs more than the board alone gives.
- What it will not do At 20 mm it is a mid and high frequency absorber, not a bass solution, and painting it heavily will close the surface and reduce what it does. If a room needs low frequency control, depth or a cavity has to come from somewhere.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for wood wool panels are on the main product page. This page covers what that means for a project in Al Khobar.
02 / Specification
The numbers, and they do not move by city
These figures are published and they do not move. The thing worth arguing about is not the number on the sheet, it is which grade and which build-up suits the room you are treating.
- Natural20 mm. Plant rooms, back of house, industrial
- Painted20 mm. Classrooms, halls, visible ceilings
| Panel size | 1200 x 600 mm |
|---|---|
| Thickness | 20 mm |
| Density | 400 kg per cubic metre |
| NRC | 0.30 |
| Test standards | ASTM C-423 and EN ISO 354 |
| Surface burning | Class A to ASTM E84 |
Consultants get the raw data, not a sales sheet. That is the whole of our side of the job, and it is set out under working with acoustic consultants.
03 / Local conditions
What decides the build-up in Al Khobar
- Industrial noise is a different problem
Compressors, generators and process plant are low frequency and structure-borne. Panels on a wall will not touch that. Mass, isolation and sealing will.
- Control rooms and operations centres
People sit in these rooms for twelve hours listening to alarms and radios. Intelligibility matters more than a reverberation figure on a sheet.
- Port on the doorstep
Dammam is close, so the road leg is short and the landed cost is predictable. That is the practical reason a factory in India can serve this market on schedule.
- Heat, dust and sealed buildings
Buildings stay closed with heavy cooling running year round. Plant noise has nowhere to escape, and rooms get hard and live inside.
- Assembly and performance rooms
Mosques, conference halls and hotel ballrooms are tall hard volumes where intelligibility over a long reverberation tail is the whole brief.
- School and campus buildings
New school and university buildings are large, hard and highly glazed. Lecture theatres and sports halls are the spaces that fail first, and ceiling absorption is the practical fix.
We would rather argue about the build-up at design stage than on site. See how we support architects.
04 / Durability
What the Al Khobar climate rules in and rules out
Al Khobar is hot and dry for most of the year, with dust and high daytime surface temperatures, and that narrows the sensible material list before acoustics is even discussed.
Dust is the enemy of open-cell products. PET felt does not shed, does not hold dust in the way fabric-wrapped glass wool does, and wipes down. Timber needs a stable indoor RH or it moves.
The risk we design against here is dust ingress and thermal movement in long runs.
Designers get colour, pattern and CNC options with the absorption figure attached to each. See how we work with interior designers.
05 / Supply
Getting it to Al Khobar, with real dates
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Dammam, then a short road run across the Eastern Province |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Dammam |
| Packing | Palletised flat, edge protected. Boards are rigid but the edges chip, so they travel protected. |
| Lead time | 4 to 7 working days for standard sizes. |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order.
Sea freight into Dammam, then a short road run to site. Air freight for samples and urgent quantities.
The same 500 sq ft minimum applies on export.
| Any finish | 500 sq ft, about 46 sq m |
|---|
A panel is 1200 x 600 mm, which is 0.72 sq m or about 7.75 sq ft, so the minimum is roughly 65 panels.
06 / Straight talk
Four honest warnings before you buy
-
The wrong product for the problem
At 20 mm it is a mid and high frequency absorber, not a bass solution, and painting it heavily will close the surface and reduce what it does. If a room needs low frequency control, depth or a cavity has to come from somewhere.
-
A number chased without a measurement
If nobody has measured the room or set a target, the specification is a guess with a decimal point in it. We will ask for the target before we quote the quantity.
-
Local approvals that nobody actually holds
We hold no Al Khobar certification and we will not borrow one. The test data we publish is ours, and we will send the reports rather than describe them.
Al Khobar: questions we are actually asked
Is there a Al Khobar factory behind this product?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Al Khobar as the manufacturer rather than through a dealer. Made at our own plant in India and shipped into Dammam, which puts the port on the doorstep of most Eastern Province sites. You buy at factory prices with one consistent batch across the order.
What decides the specification for a Al Khobar project?
Compressors, generators and process plant are low frequency and structure-borne. Panels on a wall will not touch that. Mass, isolation and sealing will. People sit in these rooms for twelve hours listening to alarms and radios. Intelligibility matters more than a reverberation figure on a sheet. Those two things move the build-up far more than the panel figure does.
Is this the right material for Al Khobar conditions?
Al Khobar is hot and dry for most of the year, with dust and high daytime surface temperatures. Dust is the enemy of open-cell products. PET felt does not shed, does not hold dust in the way fabric-wrapped glass wool does, and wipes down. Timber needs a stable indoor RH or it moves. The failure we design against here is dust ingress and thermal movement in long runs.
How quickly can material reach a site in Al Khobar?
ships from: Palwal, Haryana, India, arrives at: Dammam, then a short road run across the Eastern Province, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order.
What will wood wool acoustic panels not do?
At 20 mm it is a mid and high frequency absorber, not a bass solution, and painting it heavily will close the surface and reduce what it does. If a room needs low frequency control, depth or a cavity has to come from somewhere.
Is there a minimum order, and how does it arrive?
The same 500 sq ft minimum applies on export. Any finish, 500 sq ft, about 46 sq m. A panel is 1200 x 600 mm, which is 0.72 sq m or about 7.75 sq ft, so the minimum is roughly 65 panels. Palletised flat, edge protected. Boards are rigid but the edges chip, so they travel protected.
Next step
Tell us the room, we will tell you the build-up
One drawing gets you a proper answer. Build-up, quantities, a delivered date, and an honest note on anything we think is the wrong approach.