For projects in Al Khobar
Office acoustics and soundproofing in Al Khobar
Three separate problems get called one problem: speech carrying across an open floor, meeting rooms that leak, and hard rooms that ring. Each has a different answer and mixing them up is how budgets get wasted. Cooling runs year round at high load, so chillers, AHUs and large duct runs are constant sources. Plant room lining and duct attenuation carry most of the result.
- Open plan
- Distraction distance, not reverberation time. Ceiling absorption plus screens at the desk.
- Meeting rooms
- Privacy between rooms. That is partition and door work, not panels.
- Cabins and calls
- Short RT so a call sounds clean. A small amount of well placed absorber.
- Quote
- From a plan and a section, within 48 hours
01 / What it is
The material, and what it actually does on a Al Khobar job
Three separate problems get called one problem: speech carrying across an open floor, meeting rooms that leak, and hard rooms that ring. Each has a different answer and mixing them up is how budgets get wasted.
Cooling runs year round at high load, so chillers, AHUs and large duct runs are constant sources. Plant room lining and duct attenuation carry most of the result.
Work reaching us from Al Khobar is mostly control rooms and plant, corporate offices, compound housing, hotels, clinics, schools.
- Industrial noise is a different problem Compressors, generators and process plant are low frequency and structure-borne. Panels on a wall will not touch that. Mass, isolation and sealing will.
- Control rooms and operations centres People sit in these rooms for twelve hours listening to alarms and radios. Intelligibility matters more than a reverberation figure on a sheet.
- Port on the doorstep Dammam is close, so the road leg is short and the landed cost is predictable. That is the practical reason a factory in India can serve this market on schedule.
- Open plan Distraction distance, not reverberation time. Ceiling absorption plus screens at the desk.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for office acoustics are on the main product page. This page covers what that means for a project in Al Khobar.
Office and conference room acoustics Acoustic office screens
02 / The build-up
What goes where, from the structure in
-
Layer 1
PET felt acoustic panels
A rigid non-woven panel pressed from 100% polyester fibre, a large part of it recycled. In Al Khobar, cooling runs year round at high load, so chillers, AHUs and large duct runs are constant sources. Plant room lining and duct attenuation carry most of the result.
Over a porous backing. Panel over mineral or PET backing where the room needs genuine low mid control.
-
Layer 2
Acoustic carpet and rugs
A tile carpet with a dense polyester face on a felt backing. In Al Khobar, mosques, conference halls and hotel ballrooms are tall hard volumes where intelligibility over a long reverberation tail is the whole brief.
Over a resilient underlay. Where impact noise to the floor below is the actual complaint, the underlay does that work, not the carpet.
-
Layer 3
SoundBlanket mass loaded vinyl
A limp, high density sheet that adds mass to a partition, floor or duct without adding depth. In Al Khobar, new school and university buildings are large, hard and highly glazed. Lecture theatres and sports halls are the spaces that fail first, and ceiling absorption is the practical fix.
Duct and plant wrap. Membrane wrapped over the duct with a decoupling layer beneath, sealed at every lap.
For a Al Khobar practice, the useful thing is a detail you can put in a drawing set, not a brochure. See how we support architects.
03 / Local conditions
What the buildings in Al Khobar do to the specification
- Industrial noise is a different problem
Compressors, generators and process plant are low frequency and structure-borne. Panels on a wall will not touch that. Mass, isolation and sealing will.
- Control rooms and operations centres
People sit in these rooms for twelve hours listening to alarms and radios. Intelligibility matters more than a reverberation figure on a sheet.
- Port on the doorstep
Dammam is close, so the road leg is short and the landed cost is predictable. That is the practical reason a factory in India can serve this market on schedule.
- Heat, dust and sealed buildings
Buildings stay closed with heavy cooling running year round. Plant noise has nowhere to escape, and rooms get hard and live inside.
- Plant and HVAC
Cooling runs year round at high load, so chillers, AHUs and large duct runs are constant sources. Plant room lining and duct attenuation carry most of the result.
04 / Room by room
Room by room, on a typical Al Khobar job
-
Open plan
Distraction distance, not reverberation time. Ceiling absorption plus screens at the desk. Compressors, generators and process plant are low frequency and structure-borne. Panels on a wall will not touch that. Mass, isolation and sealing will.
- Ceiling baffles and clouds, 100% PET non-woven, the panel family
- Acoustic panels, 1800 x 900 mm, image printed into the felt rather than onto a facing
- SoundBlanket mass loaded vinyl, STC 34, 8.4 kg per sq m
-
Meeting rooms
Privacy between rooms. That is partition and door work, not panels. People sit in these rooms for twelve hours listening to alarms and radios. Intelligibility matters more than a reverberation figure on a sheet.
- Ceiling baffles and clouds, 9 to 24 mm
- Acoustic panels, Cut pattern in PET felt, adds visual rhythm without changing the absorber
- SoundBlanket mass loaded vinyl, 12.6 kg per sq m, STC on request
-
Cabins and calls
Short RT so a call sounds clean. A small amount of well placed absorber. Dammam is close, so the road leg is short and the landed cost is predictable. That is the practical reason a factory in India can serve this market on schedule.
- Ceiling baffles and clouds, Made to the drawing, standard and custom
- Acoustic panels, ASTM C423
- SoundBlanket mass loaded vinyl, 5 x 1.2 m, 6 sq m per roll
For a Al Khobar interior where the finish leads, we will say plainly what each option costs you acoustically. See how we work with interior designers.
04 / Durability
Why the climate in Al Khobar changes the material, not the target
Al Khobar is hot and dry for most of the year, with dust and high daytime surface temperatures, and that narrows the material list before acoustics is discussed.
Dust is the enemy of open-cell products. PET felt does not shed, does not hold dust in the way fabric-wrapped glass wool does, and wipes down. Timber needs a stable indoor RH or it moves.
The failure we design against here is dust ingress and thermal movement in long runs.
If a consultant has set the target, we will quote against their figures rather than ours, and stay out of the scope they own. More on working with acoustic consultants.
06 / Before you buy
Where this kind of project usually fails
-
Lining every wall while leaving the ceiling bare
The ceiling is almost always the largest untreated surface, so leaving it out means paying for panels that cannot reach the target.
-
Treating a privacy problem with absorption
Privacy is a transmission problem. Absorption makes the room sound nicer and does not stop anyone hearing through the wall.
-
Glass cabins specified without a door and head detail
A gap undoes the partition it sits in. Sealing is the cheapest line on the quote and the first one to get cut.
-
Treating it as a generic Al Khobar job
Compressors, generators and process plant are low frequency and structure-borne. Panels on a wall will not touch that. Mass, isolation and sealing will.
05 / Route to site
Supply into Al Khobar, start to site
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Dammam, then a short road run across the Eastern Province |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Dammam |
| Support | Drawings, build-ups, BOQ and material that arrives complete |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order.
Sea freight into Dammam, then a short road run to site. Air freight for samples and urgent quantities.
Questions from Al Khobar projects
What makes office acoustics and soundproofing different in Al Khobar?
Cooling runs year round at high load, so chillers, AHUs and large duct runs are constant sources. Plant room lining and duct attenuation carry most of the result. Compressors, generators and process plant are low frequency and structure-borne. Panels on a wall will not touch that. Mass, isolation and sealing will.
Where should the budget go first on a Al Khobar project?
Open plan. Distraction distance, not reverberation time. Ceiling absorption plus screens at the desk. Meeting rooms. Privacy between rooms. That is partition and door work, not panels.
Do you have an office or installation team in Al Khobar?
No. We manufacture in India and supply into Al Khobar. We give you drawings, build-ups, a BOQ and material that arrives complete, and we will tell you plainly when a job needs a local contractor we cannot be.
How does material get to a Al Khobar site?
ships from: Palwal, Haryana, India, arrives at: Dammam, then a short road run across the Eastern Province, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order.
What goes wrong most often on this kind of project?
Lining every wall while leaving the ceiling bare. Treating a privacy problem with absorption.
What do you need from us to quote?
A plan, a section through the critical partition or ceiling, and what the room is for. From that we can give a build-up and a BOQ rather than a price per square foot.
Next step
Drawings in, BOQ and a delivered date out
We quote from drawings, not from a square foot rate. Send a plan and the section through the critical wall or ceiling and you will get something you can actually build from.