Home > Washington DC > Acoustic carpet and rugs
Manufactured in India, supplied in Washington DC
Acoustic carpet and rugs in Washington DC
We manufacture acoustic carpet and rugs at our own plant at Palwal in Haryana, India, and supply them into Washington DC. Made at our own plant in India and shipped into Baltimore or Norfolk, then a short road run into the city, with the full transit window quoted openly.
- Tile size
- 500 x 500 mm
- Thickness
- 4 mm
- Face
- High density polyester
- Backing
- Felt
- Pack coverage
- 64 sq ft per pack
- Lead time
- 4 to 7 working days
- Minimum order
- From 320 sq ft
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
- Test reports sent on request, not just quoted
Manufacturer, not reseller. We hold no local approvals and will not imply we do. You get the price the factory quotes, material that matches across a large order, and advice that sometimes talks you out of a purchase.
01 / Start here
What this is, and what it changes in a Washington DC room
A tile carpet with a dense polyester face on a felt backing. It absorbs at the floor and, more usefully, kills footfall and chair scrape at the point they are generated.
Work reaching us from Washington DC is mostly institutional and association offices, meeting and briefing rooms, hotels, schools, clinics.
American homes are timber frame with gypsum board on both faces, so a party wall or a basement ceiling has almost no mass. Adding a second leaf with a limp membrane between does more than any amount of surface treatment.
- Loose lay on tackifier Tiles lifted individually for access under a raised floor, which is why tile beats broadloom in an office.
- Over a resilient underlay Where impact noise to the floor below is the actual complaint, the underlay does that work, not the carpet.
- Zoned Carpet in the circulation and meeting zones, hard floor elsewhere, so the treatment sits where the noise is made.
- What it will not do Carpet fixes footfall and chair noise and takes the edge off a live room. It will not deliver a reverberation target on its own, because the ceiling is almost always the bigger surface.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for acoustic carpet and rugs are on the main product page. This page covers what that means for a project in Washington DC.
02 / The numbers
One specification sheet, the same in every market
These figures are published and they do not move. The thing worth arguing about is not the number on the sheet, it is which grade and which build-up suits the room you are treating.
- Standard tile4 mm. Offices, classrooms, studios, corridors
| Tile size | 500 x 500 mm |
|---|---|
| Thickness | 4 mm |
| Face | High density polyester |
| Backing | Felt |
| Pack coverage | 64 sq ft per pack |
| Boxed | 20 kg, 55 x 55 x 15 cm |
Consultants get the raw data, not a sales sheet. That is the whole of our side of the job, and it is set out under working with acoustic consultants.
03 / On the ground
What the buildings in Washington DC do to the specification
- Privacy is the actual requirement
The question here is whether a conversation can be understood outside the room, not whether the room sounds pleasant. That needs the partition, the door and the ceiling handled together.
- Wide floorplates, low buildings
The height limit pushes buildings outward, so floors are broad and deep. Sound travels a long way across an open plan with nothing to interrupt it.
- Historic fabric downtown
Plenty of stock is old and protected. The work has to be internal and shallow, which rules out most thick framed systems.
- Meeting rooms used constantly
Association and institutional offices are mostly meeting space. Every one of those rooms has the same two demands: clear inside, inaudible outside.
- Assembly and performance rooms
Churches, school gyms and multipurpose halls double as performance spaces, which means a room designed for neither speech nor music has to carry both.
- The housing stock
American homes are timber frame with gypsum board on both faces, so a party wall or a basement ceiling has almost no mass. Adding a second leaf with a limp membrane between does more than any amount of surface treatment.
If you are specifying for a Washington DC project, we can give you a section, a BOQ and the honest limits of each layer. See how we support architects.
04 / Climate
Durability in Washington DC, before acoustics is discussed
Washington DC is mild summers and cold, wet winters, and that narrows the sensible material list before acoustics is even discussed.
Cold external walls and long heating seasons make condensation behind a lining the thing to design out. PET felt is unaffected by damp air.
The risk we design against here is condensation and cold bridging behind new linings.
For a Washington DC interior where the finish leads, we will say plainly what each option costs you acoustically. See how we work with interior designers.
05 / Getting it there
What the route into Washington DC actually looks like
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Baltimore or Norfolk, then road into the city |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Baltimore or Norfolk |
| Packing | Boxed, 64 sq ft per pack, 20 kg. Easy to carry up a stair, which matters on fit-out sites with no lift access. |
| Lead time | 4 to 7 working days. |
Standard items dispatch in 4 to 7 working days. The sea leg from India is long, so plan the full door to door window into the programme. We give real dates, not optimistic ones.
Sea freight into Baltimore or Norfolk, then a short road run into the city. Air freight for samples and urgent quantities.
The same minimums apply on export.
| Carpet tiles | 320 sq ft, about 30 sq m |
|---|---|
| Rugs | 500 sq ft, about 46 sq m |
A pack of tiles covers 64 sq ft and weighs 20 kg boxed, so the tile minimum is exactly five packs and about 100 kg.
06 / Worth knowing
Four honest warnings before you buy
-
The wrong product for the problem
Carpet fixes footfall and chair noise and takes the edge off a live room. It will not deliver a reverberation target on its own, because the ceiling is almost always the bigger surface.
-
Coverage bought instead of a target
Lining every surface is a purchase, not a result. We would rather calculate the area against a reverberation target and sell you less of it.
-
Local approvals that nobody actually holds
We hold no Washington DC certification and we will not borrow one. The test data we publish is ours, and we will send the reports rather than describe them.
Washington DC: questions we are actually asked
Where are the acoustic carpet and rugs you supply to Washington DC actually made?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Washington DC as the manufacturer rather than through a dealer. Made at our own plant in India and shipped into Baltimore or Norfolk, then a short road run into the city, with the full transit window quoted openly. You buy at factory prices with one consistent batch across the order.
What changes the specification on a Washington DC job?
The question here is whether a conversation can be understood outside the room, not whether the room sounds pleasant. That needs the partition, the door and the ceiling handled together. The height limit pushes buildings outward, so floors are broad and deep. Sound travels a long way across an open plan with nothing to interrupt it. Those two things move the build-up far more than the panel figure does.
Does Washington DC weather shorten the life of this material?
Washington DC is mild summers and cold, wet winters. Cold external walls and long heating seasons make condensation behind a lining the thing to design out. PET felt is unaffected by damp air. The failure we design against here is condensation and cold bridging behind new linings.
What is the delivery time into Washington DC?
ships from: Palwal, Haryana, India, arrives at: Baltimore or Norfolk, then road into the city, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. The sea leg from India is long, so plan the full door to door window into the programme. We give real dates, not optimistic ones.
What will acoustic carpet and rugs not do?
Carpet fixes footfall and chair noise and takes the edge off a live room. It will not deliver a reverberation target on its own, because the ceiling is almost always the bigger surface.
What is the minimum order and how is it packed?
The same minimums apply on export. Carpet tiles, 320 sq ft, about 30 sq m. Rugs, 500 sq ft, about 46 sq m. A pack of tiles covers 64 sq ft and weighs 20 kg boxed, so the tile minimum is exactly five packs and about 100 kg. Boxed, 64 sq ft per pack, 20 kg. Easy to carry up a stair, which matters on fit-out sites with no lift access.
Next step
Drawings in, BOQ and a delivered date out
We quote from drawings, not from a square foot rate. Send a plan and the section through the critical wall or ceiling and you will get something you can actually build from.