Manufactured in India, supplied in Warsaw
Acoustic foam and BassBloc in Warsaw
We manufacture acoustic foam and BassBloc at our own plant at Palwal in Haryana, India, and supply them into Warsaw. Made at our own plant in India and shipped into Gdansk, then road to the city, with the inland leg written into the dates we quote.
- BassBloc size
- 1800 x 900 mm
- BassBloc thickness
- 20 mm
- BassBloc density
- 100 kg per cubic metre
- Effective range
- 100 to 500 Hz
- BassBloc NRC
- 0.85
- Lead time
- 4 to 7 working days
- Minimum order
- From 200 sq ft
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
- Test reports sent on request, not just quoted
This comes from our own plant, not a trading desk. We do not have an office in your city and we will not invent one. What we can give you is factory pricing, consistent material and a technical answer before you commit.
01 / The material
What this material is and where it earns its place in Warsaw
Open cell foam shapes for high frequency control, and BassBloc, a high density absorber built for the low mid range where ordinary foam does nothing.
Work reaching us from Warsaw is mostly tower office floors, service centres, residential towers, hotels, schools, clinics.
Panel block housing with concrete walls that carry mass but no impact isolation, alongside new concrete towers with hard finishes.
- Corner loading Low frequency energy collects in corners, so absorber in the corners does more than the same area spread across a wall.
- First reflection points Mirror trick placement on side walls and ceiling, which is a handful of panels rather than a lined room.
- Behind a fabric frame Where the room has to look finished, absorber inside a frame rather than foam on show.
- What it will not do Thin foam on a wall is the most over-sold product in this industry. It controls flutter and nothing below it.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for acoustic foam and bass traps are on the main product page. This page covers what that means for a project in Warsaw.
02 / Specification
Published specification, identical wherever we ship it
The specification below is the same everywhere we supply, because a specification that changed by city would not be a specification. What changes is which grade and build-up is the right buy, and that is what the rest of this page is about.
- Foam wedge and pyramidLow density. Flutter and high frequency only
- BassBloc100 kg per cubic metre. Low mid absorption, control rooms, live rooms
| BassBloc size | 1800 x 900 mm |
|---|---|
| BassBloc thickness | 20 mm |
| BassBloc density | 100 kg per cubic metre |
| Effective range | 100 to 500 Hz |
| BassBloc NRC | 0.85 |
Consultants get the raw data, not a sales sheet. That is the whole of our side of the job, and it is set out under working with acoustic consultants.
03 / Local conditions
What we see driving Warsaw briefs
- Residential towers going up fast
New apartment towers share slabs and walls. Footfall and speech between units is easier to solve on the drawing than after the tenants arrive.
- Floors full of people talking
Service centres and call floors put hundreds of simultaneous conversations in one room. Absorption alone will not deliver privacy there. Ceiling, screens and layout have to work together.
- A very large office pipeline
Warsaw builds office space at a pace few European cities match, which means the same detail repeated across many floors and buildings. Consistency across the order is the whole value.
- New towers, hard surfaces
Glass, raised floors and exposed slabs give sound nowhere to land, so the ceiling plane has to carry the room.
- The housing stock
Panel block housing with concrete walls that carry mass but no impact isolation, alongside new concrete towers with hard finishes.
- The studio and content scene
A growing production and content sector fitting rooms into panel blocks and converted commercial buildings.
For a Warsaw practice, the useful thing is a detail you can put in a drawing set, not a brochure. See how we support architects.
04 / Durability
What the Warsaw climate rules in and rules out
Warsaw is cool and damp, with long heating seasons and cold external walls, and that narrows the sensible material list before acoustics is even discussed.
Cold wall build-ups and long heating seasons mean interstitial condensation is a real risk behind any lining. PET felt is unaffected by damp air and will not feed mould where a fabric-faced mineral product would.
The risk we design against here is condensation behind linings in older, poorly insulated stock.
Interior designers tend to arrive with the look already decided. We will tell you which finish gets there without losing the acoustics. See how we work with interior designers.
05 / Getting it there
What the route into Warsaw actually looks like
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Gdansk, then road to Warsaw |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Gdansk |
| Packing | Compressed and boxed for foam, palletised flat for BassBloc. |
| Lead time | 4 to 7 working days. |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Sea freight into Gdansk, then road to Warsaw. Air freight for samples and urgent quantities.
The same minimums apply on export.
| Acoustic foam | 200 sq ft, about 19 sq m |
|---|---|
| BassBloc | 300 sq ft, about 28 sq m |
| Bass traps | 10 pieces |
A BassBloc panel is 1800 x 900 mm, which is 1.62 sq m or about 17.4 sq ft, so the BassBloc minimum is roughly 17 panels.
06 / Straight talk
Four honest warnings before you buy
-
The wrong product for the problem
Thin foam on a wall is the most over-sold product in this industry. It controls flutter and nothing below it. If the complaint is boom, bass from a neighbour, or a room that sounds uneven at low frequency, foam is the wrong purchase and we will say so.
-
Square footage quoted before the room is understood
Anyone can price a wall. Working out how much material the room actually needs usually reduces the order, which is why not everyone does it.
-
Suppliers who imply a Warsaw presence
Ask any supplier where the material is made and who carries the warranty. We make it at Palwal in Haryana and we say so on every page, including this one.
07 / In projects
How it looks once it is installed
Warsaw: questions we are actually asked
Are these acoustic foam and BassBloc made in Warsaw?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Warsaw as the manufacturer rather than through a dealer. Made at our own plant in India and shipped into Gdansk, then road to the city, with the inland leg written into the dates we quote. You buy at factory prices with one consistent batch across the order.
What do you look at first on a Warsaw enquiry?
Service centres and call floors put hundreds of simultaneous conversations in one room. Absorption alone will not deliver privacy there. Ceiling, screens and layout have to work together. Warsaw builds office space at a pace few European cities match, which means the same detail repeated across many floors and buildings. Consistency across the order is the whole value. Those two things move the build-up far more than the panel figure does.
Will this material last in the Warsaw climate?
Warsaw is cool and damp, with long heating seasons and cold external walls. Cold wall build-ups and long heating seasons mean interstitial condensation is a real risk behind any lining. PET felt is unaffected by damp air and will not feed mould where a fabric-faced mineral product would. The failure we design against here is condensation behind linings in older, poorly insulated stock.
How does an order actually travel to Warsaw?
ships from: Palwal, Haryana, India, arrives at: Gdansk, then road to Warsaw, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
What will acoustic foam and BassBloc not do?
Thin foam on a wall is the most over-sold product in this industry. It controls flutter and nothing below it. If the complaint is boom, bass from a neighbour, or a room that sounds uneven at low frequency, foam is the wrong purchase and we will say so.
Is there a minimum order, and how does it arrive?
The same minimums apply on export. Acoustic foam, 200 sq ft, about 19 sq m. BassBloc, 300 sq ft, about 28 sq m. Bass traps, 10 pieces. A BassBloc panel is 1800 x 900 mm, which is 1.62 sq m or about 17.4 sq ft, so the BassBloc minimum is roughly 17 panels. Compressed and boxed for foam, palletised flat for BassBloc.
Next step
Send the drawings, get a straight answer
One drawing gets you a proper answer. Build-up, quantities, a delivered date, and an honest note on anything we think is the wrong approach.