Manufactured in India, supplied in Warangal
Ceiling baffles and clouds in Warangal
We manufacture ceiling baffles and clouds at our own plant at Palwal in Haryana, India, and supply them into Warangal. Warangal is growing on the back of education and textiles, and most of what we supply goes into new institutional and industrial buildings.
- Material
- 100% PET non-woven, the panel family
- Thickness
- 9 to 24 mm
- Size
- Made to the drawing, standard and custom
- Exposure
- Both faces work, which is why suspended area outperforms the same area laid flat
- Test standard
- ASTM C423
- Lead time
- Confirmed against the drawing
- Minimum order
- 500 sq ft, about 46 sq m
- ASTM C423
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
We make this ourselves and ship it to you. No local branch, no borrowed certifications, no dealer margin. One batch across the whole order, and an honest answer when the product is wrong for the problem.
01 / Start here
What this is, and what it changes in a Warangal room
PET felt suspended from the soffit, vertically as baffles or horizontally as clouds. It is how you treat a room with exposed services, where there is no ceiling to line.
Work reaching us from Warangal is mostly colleges and hostels, textile units, hospitals, auditoriums, offices, hotels.
RC frame apartments and gated communities with stone and tile floors, sharing slabs and lift cores.
- Vertical baffles Hung on edge in rows. Both faces absorb, so coverage figures based on plan area understate them.
- Horizontal clouds Flat rafts over the occupied zone, which also reflect early speech energy back down where it helps.
- Mixed with services Set out around ducts, trays and lighting rather than fighting them, coordinated from your reflected ceiling plan.
- What it will not do Baffles are efficient, not magic. In a very tall volume the height above the baffle line still rings, and the honest answer is either more area or accepting a higher RT, not a denser panel.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for baffles and clouds are on the main product page. This page covers what that means for a project in Warangal.
Acoustic ceiling baffles Acoustic ceiling clouds Acoustic ceiling tiles
02 / The numbers
One specification sheet, the same in every market
We publish one data sheet for every market. If a supplier quotes you a different figure for the same product in a different city, one of the two numbers is wrong.
- EchoCore 151500 GSM. Offices, retail, general
- EchoPro 181800 GSM. Halls, atria, spaces with a target
- EchoMax 222200 GSM. High volume and high occupancy
| Material | 100% PET non-woven, the panel family |
|---|---|
| Thickness | 9 to 24 mm |
| Size | Made to the drawing, standard and custom |
| Exposure | Both faces work, which is why suspended area outperforms the same area laid flat |
| Test standard | ASTM C423 |
Consultants get the raw data, not a sales sheet. That is the whole of our side of the job, and it is set out under working with acoustic consultants.
03 / In this market
What the buildings in Warangal do to the specification
- New buildings, late decisions
Concrete and tile put up quickly, with the acoustic problem discovered at handover. Early drawings are worth more than extra material later.
- Textile machinery
Continuous machine noise in units close to housing. Enclosure at the source rather than lining the hall.
- Teaching at scale
Large lecture rooms and hostels where speech fails and noise between rooms is constant.
- Four days by road
A dedicated truck from Palwal, confirmed before dispatch, with samples sent ahead.
- School and campus buildings
Large private school and university campuses with lecture halls and hostels built to a repeating detail.
We would rather argue about the build-up at design stage than on site. See how we support architects.
04 / Climate and durability
The Warangal climate decides the material list
Warangal is warm and humid through most of the year, with a long wet season, and that narrows the sensible material list before acoustics is even discussed.
Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them.
The risk we design against here is mould, sagging fabric finishes and swelling in timber.
Interior designers tend to arrive with the look already decided. We will tell you which finish gets there without losing the acoustics. See how we work with interior designers.
05 / Route to site
How material reaches a Warangal site
| Made at | Our own plant, Palwal, Haryana |
|---|---|
| Reaches site in | four days |
| Dispatch | 2 to 4 working days |
| To site | four days |
| Packing | Flat packed with fixings, sets labelled by row so the install sequence matches the drawing. |
| Lead time | Confirmed against the drawing. Standard sizes 4 to 7 working days. |
Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
By road from Palwal, roughly sixteen hundred kilometres, normally four days on a dedicated truck.
500 sq ft, about 46 sq m, across baffles and clouds together.
| Baffles and clouds | 500 sq ft, about 46 sq m |
|---|
Baffles and clouds are cut to the drawing, so the minimum is counted on finished panel area. Both faces of a hung baffle absorb, which is why coverage taken off a plan understates what the order actually does.
06 / Worth knowing
Four honest warnings before you buy
-
The wrong product for the problem
Baffles are efficient, not magic. In a very tall volume the height above the baffle line still rings, and the honest answer is either more area or accepting a higher RT, not a denser panel.
-
Square footage quoted before the room is understood
Anyone can price a wall. Working out how much material the room actually needs usually reduces the order, which is why not everyone does it.
-
A claim of being local to Warangal
We manufacture in India and supply here. We do not run an office in this city and we will not pretend to, because you would find out on the first site visit.
Warangal: questions we are actually asked
Where are the ceiling baffles and clouds you supply to Warangal actually made?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Warangal as the manufacturer rather than through a dealer. Warangal is growing on the back of education and textiles, and most of what we supply goes into new institutional and industrial buildings. You buy at factory prices with one consistent batch across the order.
What decides the specification for a Warangal project?
Concrete and tile put up quickly, with the acoustic problem discovered at handover. Early drawings are worth more than extra material later. Continuous machine noise in units close to housing. Enclosure at the source rather than lining the hall. Those two things move the build-up far more than the panel figure does.
Is this the right material for Warangal conditions?
Warangal is warm and humid through most of the year, with a long wet season. Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them. The failure we design against here is mould, sagging fabric finishes and swelling in timber.
What is the delivery time into Warangal?
made at: Our own plant, Palwal, Haryana, reaches site in: four days, dispatch: 2 to 4 working days. Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
What should you not buy ceiling baffles and clouds for?
Baffles are efficient, not magic. In a very tall volume the height above the baffle line still rings, and the honest answer is either more area or accepting a higher RT, not a denser panel.
What quantity do we have to order, and in what packaging?
500 sq ft, about 46 sq m, across baffles and clouds together. Baffles and clouds, 500 sq ft, about 46 sq m. Baffles and clouds are cut to the drawing, so the minimum is counted on finished panel area. Both faces of a hung baffle absorb, which is why coverage taken off a plan understates what the order actually does. Flat packed with fixings, sets labelled by row so the install sequence matches the drawing.
Next step
Drawings in, BOQ and a delivered date out
One drawing gets you a proper answer. Build-up, quantities, a delivered date, and an honest note on anything we think is the wrong approach.