Home > Warangal > Acoustic carpet and rugs

Acoustic carpet tiles and rugs on a modern floor

Manufactured in India, supplied in Warangal

Acoustic carpet and rugs in Warangal

We manufacture acoustic carpet and rugs at our own plant at Palwal in Haryana, India, and supply them into Warangal. Warangal is growing on the back of education and textiles, and most of what we supply goes into new institutional and industrial buildings.

Tile size
500 x 500 mm
Thickness
4 mm
Face
High density polyester
Backing
Felt
Pack coverage
64 sq ft per pack
Lead time
4 to 7 working days
Minimum order
From 320 sq ft
  • Made at our own plant, Palwal, Haryana, India
  • One batch across the order, no blending between runs
  • Test reports sent on request, not just quoted

We make this ourselves and ship it to you. No local branch, no borrowed certifications, no dealer margin. One batch across the whole order, and an honest answer when the product is wrong for the problem.

01 / Start here

What this is, and what it changes in a Warangal room

A tile carpet with a dense polyester face on a felt backing. It absorbs at the floor and, more usefully, kills footfall and chair scrape at the point they are generated.

Work reaching us from Warangal is mostly colleges and hostels, textile units, hospitals, auditoriums, offices, hotels.

RC frame apartments and gated communities with stone and tile floors, sharing slabs and lift cores.

  • Loose lay on tackifier Tiles lifted individually for access under a raised floor, which is why tile beats broadloom in an office.
  • Over a resilient underlay Where impact noise to the floor below is the actual complaint, the underlay does that work, not the carpet.
  • Zoned Carpet in the circulation and meeting zones, hard floor elsewhere, so the treatment sits where the noise is made.
  • What it will not do Carpet fixes footfall and chair noise and takes the edge off a live room. It will not deliver a reverberation target on its own, because the ceiling is almost always the bigger surface.

Full specification

Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for acoustic carpet and rugs are on the main product page. This page covers what that means for a project in Warangal.

Acoustic carpets and rugs

02 / Specification

The published figures, unchanged by location

The specification below is the same everywhere we supply, because a specification that changed by city would not be a specification. What changes is which grade and build-up is the right buy, and that is what the rest of this page is about.

  • Standard tile4 mm. Offices, classrooms, studios, corridors
Acoustic carpet and rugs: published specification
Tile size500 x 500 mm
Thickness4 mm
FaceHigh density polyester
BackingFelt
Pack coverage64 sq ft per pack
Boxed20 kg, 55 x 55 x 15 cm

Consultants get the raw data, not a sales sheet. That is the whole of our side of the job, and it is set out under working with acoustic consultants.

03 / What drives the brief

The Warangal conditions that change the answer

  • New buildings, late decisions

    Concrete and tile put up quickly, with the acoustic problem discovered at handover. Early drawings are worth more than extra material later.

  • Textile machinery

    Continuous machine noise in units close to housing. Enclosure at the source rather than lining the hall.

  • Teaching at scale

    Large lecture rooms and hostels where speech fails and noise between rooms is constant.

  • Four days by road

    A dedicated truck from Palwal, confirmed before dispatch, with samples sent ahead.

  • Assembly and performance rooms

    Auditoriums, banquet halls and places of worship are large hard volumes in concrete and stone where speech falls apart long before anyone calls the room echoey.

  • The housing stock

    RC frame apartments and gated communities with stone and tile floors, sharing slabs and lift cores.

We would rather argue about the build-up at design stage than on site. See how we support architects.

04 / Durability

What the Warangal climate rules in and rules out

Warangal is warm and humid through most of the year, with a long wet season, and that narrows the sensible material list before acoustics is even discussed.

Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them.

The risk we design against here is mould, sagging fabric finishes and swelling in timber.

If the visual is fixed and the room still has to perform, that is a solvable problem and a conversation worth having early. See how we work with interior designers.

05 / Getting it there

What the route into Warangal actually looks like

Supply into Warangal
Made atOur own plant, Palwal, Haryana
Reaches site infour days
Dispatch2 to 4 working days
To sitefour days
PackingBoxed, 64 sq ft per pack, 20 kg. Easy to carry up a stair, which matters on fit-out sites with no lift access.
Lead time4 to 7 working days.

Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.

By road from Palwal, roughly sixteen hundred kilometres, normally four days on a dedicated truck.

320 sq ft for carpet tiles, 500 sq ft for rugs.

Minimum order, acoustic carpet and rugs
Carpet tiles320 sq ft, about 30 sq m, 5 packs
Rugs500 sq ft, about 46 sq m

A pack of tiles covers 64 sq ft and weighs 20 kg boxed, so the tile minimum is exactly five packs and about 100 kg.

06 / Read this first

What we will tell you that a reseller will not

  • The wrong product for the problem

    Carpet fixes footfall and chair noise and takes the edge off a live room. It will not deliver a reverberation target on its own, because the ceiling is almost always the bigger surface.

  • Square footage quoted before the room is understood

    Anyone can price a wall. Working out how much material the room actually needs usually reduces the order, which is why not everyone does it.

  • Suppliers who imply a Warangal presence

    Ask any supplier where the material is made and who carries the warranty. We make it at Palwal in Haryana and we say so on every page, including this one.

FAQ

Warangal: questions we are actually asked

Do you manufacture acoustic carpet and rugs in Warangal?

No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Warangal as the manufacturer rather than through a dealer. Warangal is growing on the back of education and textiles, and most of what we supply goes into new institutional and industrial buildings. You buy at factory prices with one consistent batch across the order.

What changes the specification on a Warangal job?

Concrete and tile put up quickly, with the acoustic problem discovered at handover. Early drawings are worth more than extra material later. Continuous machine noise in units close to housing. Enclosure at the source rather than lining the hall. Those two things move the build-up far more than the panel figure does.

Will this material last in the Warangal climate?

Warangal is warm and humid through most of the year, with a long wet season. Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them. The failure we design against here is mould, sagging fabric finishes and swelling in timber.

What is the delivery time into Warangal?

made at: Our own plant, Palwal, Haryana, reaches site in: four days, dispatch: 2 to 4 working days. Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.

What will acoustic carpet and rugs not do?

Carpet fixes footfall and chair noise and takes the edge off a live room. It will not deliver a reverberation target on its own, because the ceiling is almost always the bigger surface.

What is the minimum order and how is it packed?

320 sq ft for carpet tiles, 500 sq ft for rugs. Carpet tiles, 320 sq ft, about 30 sq m, 5 packs. Rugs, 500 sq ft, about 46 sq m. A pack of tiles covers 64 sq ft and weighs 20 kg boxed, so the tile minimum is exactly five packs and about 100 kg. Boxed, 64 sq ft per pack, 20 kg. Easy to carry up a stair, which matters on fit-out sites with no lift access.

Next step

Tell us the room, we will tell you the build-up

We quote from drawings, not from a square foot rate. Send a plan and the section through the critical wall or ceiling and you will get something you can actually build from.