Manufactured in India, supplied in Vienna
Acoustic foam and BassBloc in Vienna
We manufacture acoustic foam and BassBloc at our own plant at Palwal in Haryana, India, and supply them into Vienna. Made at our own plant in India and routed through Koper or Hamburg, then rail and road into the city, with the inland leg written into the dates we quote.
- BassBloc size
- 1800 x 900 mm
- BassBloc thickness
- 20 mm
- BassBloc density
- 100 kg per cubic metre
- Effective range
- 100 to 500 Hz
- BassBloc NRC
- 0.85
- Lead time
- 4 to 7 working days
- Minimum order
- From 200 sq ft
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
- Test reports sent on request, not just quoted
We make this ourselves and ship it to you. No local branch, no borrowed certifications, no dealer margin. One batch across the whole order, and an honest answer when the product is wrong for the problem.
01 / Start here
The material, and what it actually does on a Vienna job
Open cell foam shapes for high frequency control, and BassBloc, a high density absorber built for the low mid range where ordinary foam does nothing.
Work reaching us from Vienna is mostly gründerzeit apartments, offices, studios, restaurants, clinics, schools, hotels.
Gruenderzeit blocks have solid masonry walls and timber joist floors, so footfall carries even where airborne noise does not. Newer stock is concrete and much harder inside.
- Corner loading Low frequency energy collects in corners, so absorber in the corners does more than the same area spread across a wall.
- First reflection points Mirror trick placement on side walls and ceiling, which is a handful of panels rather than a lined room.
- Behind a fabric frame Where the room has to look finished, absorber inside a frame rather than foam on show.
- What it will not do Thin foam on a wall is the most over-sold product in this industry. It controls flutter and nothing below it.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for acoustic foam and bass traps are on the main product page. This page covers what that means for a project in Vienna.
02 / Specification
The published figures, unchanged by location
The specification below is the same everywhere we supply, because a specification that changed by city would not be a specification. What changes is which grade and build-up is the right buy, and that is what the rest of this page is about.
- Foam wedge and pyramidLow density. Flutter and high frequency only
- BassBloc100 kg per cubic metre. Low mid absorption, control rooms, live rooms
| BassBloc size | 1800 x 900 mm |
|---|---|
| BassBloc thickness | 20 mm |
| BassBloc density | 100 kg per cubic metre |
| Effective range | 100 to 500 Hz |
| BassBloc NRC | 0.85 |
On a Vienna job with a consultant involved, our part is material that matches the submitted data. See working with acoustic consultants.
03 / In this market
What decides the build-up in Vienna
- Gründerzeit rooms are tall and hard
High ceilings and lime plaster hold sound for a long time. A room can look perfect and still be unusable for speech until something absorbent goes high on the wall or across the ceiling.
- Timber floors between apartments
Footfall travels down through the joists into the flat below. A resilient layer under the finish does far more than anything applied to the ceiling underneath.
- Quiet hours are taken seriously
Neighbour complaints here are not shrugged off. The isolation layer is what protects a home studio, a practice room or a late venue from becoming somebody else problem.
- Trams and the Ring
Ground level trams and traffic put low frequency into the structure. Panels on a wall will not touch it, and we will say so rather than sell them.
- The housing stock
Gruenderzeit blocks have solid masonry walls and timber joist floors, so footfall carries even where airborne noise does not. Newer stock is concrete and much harder inside.
- The studio and content scene
A strong classical and recording tradition means measured targets are expected rather than adjectives.
We would rather argue about the build-up at design stage than on site. See how we support architects.
04 / Conditions
Durability in Vienna, before acoustics is discussed
Vienna is cool and damp, with long heating seasons and cold external walls, and that narrows the sensible material list before acoustics is even discussed.
Cold wall build-ups and long heating seasons mean interstitial condensation is a real risk behind any lining. PET felt is unaffected by damp air and will not feed mould where a fabric-faced mineral product would.
The risk we design against here is condensation behind linings in older, poorly insulated stock.
For a Vienna interior where the finish leads, we will say plainly what each option costs you acoustically. See how we work with interior designers.
05 / Logistics
Getting it to Vienna, with real dates
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Koper or Hamburg, then rail and road into Vienna |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Koper or Hamburg |
| Packing | Compressed and boxed for foam, palletised flat for BassBloc. |
| Lead time | 4 to 7 working days. |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Sea freight into Koper or Hamburg, then rail and road into Vienna. Air freight for samples and urgent quantities.
The same minimums apply on export.
| Acoustic foam | 200 sq ft, about 19 sq m |
|---|---|
| BassBloc | 300 sq ft, about 28 sq m |
| Bass traps | 10 pieces |
A BassBloc panel is 1800 x 900 mm, which is 1.62 sq m or about 17.4 sq ft, so the BassBloc minimum is roughly 17 panels.
06 / Read this first
What we will tell you that a reseller will not
-
The wrong product for the problem
Thin foam on a wall is the most over-sold product in this industry. It controls flutter and nothing below it. If the complaint is boom, bass from a neighbour, or a room that sounds uneven at low frequency, foam is the wrong purchase and we will say so.
-
Coverage bought instead of a target
Lining every surface is a purchase, not a result. We would rather calculate the area against a reverberation target and sell you less of it.
-
Local approvals that nobody actually holds
We hold no Vienna certification and we will not borrow one. The test data we publish is ours, and we will send the reports rather than describe them.
07 / In projects
The product on finished jobs
Vienna: questions we are actually asked
Are these acoustic foam and BassBloc made in Vienna?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Vienna as the manufacturer rather than through a dealer. Made at our own plant in India and routed through Koper or Hamburg, then rail and road into the city, with the inland leg written into the dates we quote. You buy at factory prices with one consistent batch across the order.
What decides the specification for a Vienna project?
High ceilings and lime plaster hold sound for a long time. A room can look perfect and still be unusable for speech until something absorbent goes high on the wall or across the ceiling. Footfall travels down through the joists into the flat below. A resilient layer under the finish does far more than anything applied to the ceiling underneath. Those two things move the build-up far more than the panel figure does.
Does Vienna weather shorten the life of this material?
Vienna is cool and damp, with long heating seasons and cold external walls. Cold wall build-ups and long heating seasons mean interstitial condensation is a real risk behind any lining. PET felt is unaffected by damp air and will not feed mould where a fabric-faced mineral product would. The failure we design against here is condensation behind linings in older, poorly insulated stock.
How does an order actually travel to Vienna?
ships from: Palwal, Haryana, India, arrives at: Koper or Hamburg, then rail and road into Vienna, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
What will acoustic foam and BassBloc not do?
Thin foam on a wall is the most over-sold product in this industry. It controls flutter and nothing below it. If the complaint is boom, bass from a neighbour, or a room that sounds uneven at low frequency, foam is the wrong purchase and we will say so.
Is there a minimum order, and how does it arrive?
The same minimums apply on export. Acoustic foam, 200 sq ft, about 19 sq m. BassBloc, 300 sq ft, about 28 sq m. Bass traps, 10 pieces. A BassBloc panel is 1800 x 900 mm, which is 1.62 sq m or about 17.4 sq ft, so the BassBloc minimum is roughly 17 panels. Compressed and boxed for foam, palletised flat for BassBloc.
Next step
Send the drawings, get a straight answer
One drawing gets you a proper answer. Build-up, quantities, a delivered date, and an honest note on anything we think is the wrong approach.