Home > Vienna > Acoustic carpet and rugs

Acoustic carpet tiles and rugs on a modern floor

Manufactured in India, supplied in Vienna

Acoustic carpet and rugs in Vienna

We manufacture acoustic carpet and rugs at our own plant at Palwal in Haryana, India, and supply them into Vienna. Made at our own plant in India and routed through Koper or Hamburg, then rail and road into the city, with the inland leg written into the dates we quote.

Tile size
500 x 500 mm
Thickness
4 mm
Face
High density polyester
Backing
Felt
Pack coverage
64 sq ft per pack
Lead time
4 to 7 working days
Minimum order
From 320 sq ft
  • Made at our own plant, Palwal, Haryana, India
  • One batch across the order, no blending between runs
  • Test reports sent on request, not just quoted

This comes from our own plant, not a trading desk. We do not have an office in your city and we will not invent one. What we can give you is factory pricing, consistent material and a technical answer before you commit.

01 / The product

What you are buying, and what it fixes in Vienna

A tile carpet with a dense polyester face on a felt backing. It absorbs at the floor and, more usefully, kills footfall and chair scrape at the point they are generated.

Work reaching us from Vienna is mostly gründerzeit apartments, offices, studios, restaurants, clinics, schools, hotels.

Gruenderzeit blocks have solid masonry walls and timber joist floors, so footfall carries even where airborne noise does not. Newer stock is concrete and much harder inside.

  • Loose lay on tackifier Tiles lifted individually for access under a raised floor, which is why tile beats broadloom in an office.
  • Over a resilient underlay Where impact noise to the floor below is the actual complaint, the underlay does that work, not the carpet.
  • Zoned Carpet in the circulation and meeting zones, hard floor elsewhere, so the treatment sits where the noise is made.
  • What it will not do Carpet fixes footfall and chair noise and takes the edge off a live room. It will not deliver a reverberation target on its own, because the ceiling is almost always the bigger surface.

Full specification

Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for acoustic carpet and rugs are on the main product page. This page covers what that means for a project in Vienna.

Acoustic carpets and rugs

02 / Specification

The numbers, and they do not move by city

Nothing below changes by location. The decisions that do change are grade, thickness and how the material is mounted, and those are covered further down.

  • Standard tile4 mm. Offices, classrooms, studios, corridors
Acoustic carpet and rugs: published specification
Tile size500 x 500 mm
Thickness4 mm
FaceHigh density polyester
BackingFelt
Pack coverage64 sq ft per pack
Boxed20 kg, 55 x 55 x 15 cm

Consultants get the raw data, not a sales sheet. That is the whole of our side of the job, and it is set out under working with acoustic consultants.

03 / In this market

What decides the build-up in Vienna

  • Gründerzeit rooms are tall and hard

    High ceilings and lime plaster hold sound for a long time. A room can look perfect and still be unusable for speech until something absorbent goes high on the wall or across the ceiling.

  • Timber floors between apartments

    Footfall travels down through the joists into the flat below. A resilient layer under the finish does far more than anything applied to the ceiling underneath.

  • Quiet hours are taken seriously

    Neighbour complaints here are not shrugged off. The isolation layer is what protects a home studio, a practice room or a late venue from becoming somebody else problem.

  • Trams and the Ring

    Ground level trams and traffic put low frequency into the structure. Panels on a wall will not touch it, and we will say so rather than sell them.

  • Assembly and performance rooms

    Concert halls, church buildings and civic rooms are long-reverberation volumes where any intervention must be reversible.

  • The housing stock

    Gruenderzeit blocks have solid masonry walls and timber joist floors, so footfall carries even where airborne noise does not. Newer stock is concrete and much harder inside.

Architects working in Vienna usually need the build-up before the product. We will draw the section and mark what does the work. See how we support architects.

04 / Climate and durability

What the Vienna climate rules in and rules out

Vienna is cool and damp, with long heating seasons and cold external walls, and that narrows the sensible material list before acoustics is even discussed.

Cold wall build-ups and long heating seasons mean interstitial condensation is a real risk behind any lining. PET felt is unaffected by damp air and will not feed mould where a fabric-faced mineral product would.

The risk we design against here is condensation behind linings in older, poorly insulated stock.

Interior designers tend to arrive with the look already decided. We will tell you which finish gets there without losing the acoustics. See how we work with interior designers.

05 / Supply

Getting it to Vienna, with real dates

Supply into Vienna
Ships fromPalwal, Haryana, India
Arrives atKoper or Hamburg, then rail and road into Vienna
Dispatch4 to 7 working days
FreightSea via Koper or Hamburg
PackingBoxed, 64 sq ft per pack, 20 kg. Easy to carry up a stair, which matters on fit-out sites with no lift access.
Lead time4 to 7 working days.

Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.

Sea freight into Koper or Hamburg, then rail and road into Vienna. Air freight for samples and urgent quantities.

The same minimums apply on export.

Minimum order, acoustic carpet and rugs
Carpet tiles320 sq ft, about 30 sq m
Rugs500 sq ft, about 46 sq m

A pack of tiles covers 64 sq ft and weighs 20 kg boxed, so the tile minimum is exactly five packs and about 100 kg.

06 / Before you buy

What we will tell you that a reseller will not

  • The wrong product for the problem

    Carpet fixes footfall and chair noise and takes the edge off a live room. It will not deliver a reverberation target on its own, because the ceiling is almost always the bigger surface.

  • A number chased without a measurement

    If nobody has measured the room or set a target, the specification is a guess with a decimal point in it. We will ask for the target before we quote the quantity.

  • Local approvals that nobody actually holds

    We hold no Vienna certification and we will not borrow one. The test data we publish is ours, and we will send the reports rather than describe them.

FAQ

Vienna: questions we are actually asked

Where are the acoustic carpet and rugs you supply to Vienna actually made?

No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Vienna as the manufacturer rather than through a dealer. Made at our own plant in India and routed through Koper or Hamburg, then rail and road into the city, with the inland leg written into the dates we quote. You buy at factory prices with one consistent batch across the order.

What do you look at first on a Vienna enquiry?

High ceilings and lime plaster hold sound for a long time. A room can look perfect and still be unusable for speech until something absorbent goes high on the wall or across the ceiling. Footfall travels down through the joists into the flat below. A resilient layer under the finish does far more than anything applied to the ceiling underneath. Those two things move the build-up far more than the panel figure does.

Is this the right material for Vienna conditions?

Vienna is cool and damp, with long heating seasons and cold external walls. Cold wall build-ups and long heating seasons mean interstitial condensation is a real risk behind any lining. PET felt is unaffected by damp air and will not feed mould where a fabric-faced mineral product would. The failure we design against here is condensation behind linings in older, poorly insulated stock.

How does an order actually travel to Vienna?

ships from: Palwal, Haryana, India, arrives at: Koper or Hamburg, then rail and road into Vienna, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.

Where do acoustic carpet and rugs fail to help?

Carpet fixes footfall and chair noise and takes the edge off a live room. It will not deliver a reverberation target on its own, because the ceiling is almost always the bigger surface.

What is the minimum order and how is it packed?

The same minimums apply on export. Carpet tiles, 320 sq ft, about 30 sq m. Rugs, 500 sq ft, about 46 sq m. A pack of tiles covers 64 sq ft and weighs 20 kg boxed, so the tile minimum is exactly five packs and about 100 kg. Boxed, 64 sq ft per pack, 20 kg. Easy to carry up a stair, which matters on fit-out sites with no lift access.

Next step

Send the drawings, get a straight answer

Send what you have. We will give you a layer by layer build-up, a bill of quantities and a date material lands, and we will flag anything in the brief that will not achieve what you want.