Manufactured in India, supplied in Vancouver
Wooden slat acoustic panels in Vancouver
We manufacture wooden slat acoustic panels at our own plant at Palwal in Haryana, India, and supply them into Vancouver. Made at our own plant in India and shipped straight into Vancouver, so the container lands at the city rather than railing across the country.
- Substrate
- MDF, FR MDF, HDF or HDHMR
- Patterns
- 13-3, 14-2, 28-4 and 59-5
- Panel sizes
- 2440 x 192 mm and 2440 x 128 mm
- Thickness
- 14, 16 and 18 mm
- Coverage
- 96 sq ft per unit
- Lead time
- Longer than felt
- Minimum order
- 500 sq ft, about 46 sq m
- EN 13501-1 Class B s1 d0 on FR substrate
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
We make this ourselves and ship it to you. No local branch, no borrowed certifications, no dealer margin. One batch across the whole order, and an honest answer when the product is wrong for the problem.
01 / What it is
The product, described honestly, for a Vancouver brief
Timber slats on an acoustic backing. The slats are the finish and the rhythm, the backing does the absorbing. Used where the room has to look considered rather than treated.
Work reaching us from Vancouver is mostly mass timber and light frame housing, condominium towers, offices, schools, studios, clinics.
Timber frame with gypsum board in low rise, concrete in towers. Condominium party walls and floors generate most complaints, and impact noise through a concrete slab needs a resilient layer, not a panel.
- Slats on felt backing The standard. Absorption comes from the backing behind the gaps, so the slat gap ratio is an acoustic decision, not only a visual one.
- Slats on a cavity Backing plus an air gap behind moves absorption lower, which matters in music rooms.
- Feature wall only Slats where they are seen, plain felt elsewhere, to hold the budget where it shows.
- What it will not do A tight slat pattern looks denser but absorbs less, because the open area is what lets sound reach the backing. If the visual you want and the RT target you need pull apart, we will tell you which one the pattern is serving.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for wooden slat panels are on the main product page. This page covers what that means for a project in Vancouver.
02 / Specification
The numbers, and they do not move by city
The specification below is the same everywhere we supply, because a specification that changed by city would not be a specification. What changes is which grade and build-up is the right buy, and that is what the rest of this page is about.
- MDFStandard. Dry interiors, general commercial
- FR MDFFire rated. Public buildings and anywhere the specification calls for a class
- HDHMRMoisture resistant. Humid climates and rooms that see damp
| Substrate | MDF, FR MDF, HDF or HDHMR |
|---|---|
| Patterns | 13-3, 14-2, 28-4 and 59-5 |
| Panel sizes | 2440 x 192 mm and 2440 x 128 mm |
| Thickness | 14, 16 and 18 mm |
| Coverage | 96 sq ft per unit |
| Fire class | EN 13501-1 Class B s1 d0 on FR substrate |
On a Vancouver job with a consultant involved, our part is material that matches the submitted data. See working with acoustic consultants.
03 / In this market
What decides the build-up in Vancouver
- Timber is light
Mass timber looks solid and performs nothing like concrete at low frequency. Added mass and a decoupled layer do the work, not more absorption.
- Rain on the roof
Metal and membrane roofs over open volumes turn heavy rain into a noise source worth designing for rather than discovering.
- Damp, mild climate
PET felt does not absorb moisture, shed fibre or feed mould, which suits cold external walls and sealed rooms.
- The port is right here
Direct sea into Vancouver means no rail leg across the country, so the landed cost and the date are both easier to hold.
- Assembly and performance rooms
Community centres, school gymnasiums and church halls carry speech, music and sport in the same hard volume.
If you are specifying for a Vancouver project, we can give you a section, a BOQ and the honest limits of each layer. See how we support architects.
04 / Climate
The Vancouver climate decides the material list
Vancouver is cool and damp, with long heating seasons and cold external walls, and that narrows the sensible material list before acoustics is even discussed.
Cold wall build-ups and long heating seasons mean interstitial condensation is a real risk behind any lining. PET felt is unaffected by damp air and will not feed mould where a fabric-faced mineral product would.
The risk we design against here is condensation behind linings in older, poorly insulated stock.
Designers get colour, pattern and CNC options with the absorption figure attached to each. See how we work with interior designers.
05 / Logistics
What the route into Vancouver actually looks like
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Vancouver, then a short road run to site |
| Dispatch | 4 to 7 working days |
| Freight | Sea into Vancouver |
| Packing | Braced crates, slats supported along their length. Timber moves, so crates are kept flat and dry. |
| Lead time | Longer than felt. Confirmed against the pattern and substrate at quote stage. |
Standard items dispatch in 4 to 7 working days. The sea leg from India is long, so plan the full door to door window into the programme. We give real dates, not optimistic ones.
Sea freight direct into Vancouver, then a short road run to site. Air freight for samples and urgent quantities.
The same 500 sq ft minimum applies on export.
| Any specification | 500 sq ft, about 46 sq m |
|---|
One unit covers 96 sq ft, so the minimum is a little over five units. Substrate, slat pattern, width and thickness can be mixed inside the same order.
06 / Before you buy
What we will tell you that a reseller will not
-
The wrong product for the problem
A tight slat pattern looks denser but absorbs less, because the open area is what lets sound reach the backing. If the visual you want and the RT target you need pull apart, we will tell you which one the pattern is serving.
-
A number chased without a measurement
If nobody has measured the room or set a target, the specification is a guess with a decimal point in it. We will ask for the target before we quote the quantity.
-
Suppliers who imply a Vancouver presence
Ask any supplier where the material is made and who carries the warranty. We make it at Palwal in Haryana and we say so on every page, including this one.
Vancouver: questions we are actually asked
Are these wooden slat acoustic panels made in Vancouver?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Vancouver as the manufacturer rather than through a dealer. Made at our own plant in India and shipped straight into Vancouver, so the container lands at the city rather than railing across the country. You buy at factory prices with one consistent batch across the order.
What do you look at first on a Vancouver enquiry?
Mass timber looks solid and performs nothing like concrete at low frequency. Added mass and a decoupled layer do the work, not more absorption. Metal and membrane roofs over open volumes turn heavy rain into a noise source worth designing for rather than discovering. Those two things move the build-up far more than the panel figure does.
Will this material last in the Vancouver climate?
Vancouver is cool and damp, with long heating seasons and cold external walls. Cold wall build-ups and long heating seasons mean interstitial condensation is a real risk behind any lining. PET felt is unaffected by damp air and will not feed mould where a fabric-faced mineral product would. The failure we design against here is condensation behind linings in older, poorly insulated stock.
When would material land on a Vancouver site?
ships from: Palwal, Haryana, India, arrives at: Vancouver, then a short road run to site, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. The sea leg from India is long, so plan the full door to door window into the programme. We give real dates, not optimistic ones.
Where do wooden slat acoustic panels fail to help?
A tight slat pattern looks denser but absorbs less, because the open area is what lets sound reach the backing. If the visual you want and the RT target you need pull apart, we will tell you which one the pattern is serving.
What quantity do we have to order, and in what packaging?
The same 500 sq ft minimum applies on export. Any specification, 500 sq ft, about 46 sq m. One unit covers 96 sq ft, so the minimum is a little over five units. Substrate, slat pattern, width and thickness can be mixed inside the same order. Braced crates, slats supported along their length. Timber moves, so crates are kept flat and dry.
Next step
Send a plan and a section, get a real build-up
We quote from drawings, not from a square foot rate. Send a plan and the section through the critical wall or ceiling and you will get something you can actually build from.