Manufactured in India, supplied in Toronto
Soundproofing materials in Toronto
We manufacture soundproofing materials at our own plant at Palwal in Haryana, India, and supply them into Toronto. Made at our own plant in India and shipped up the St Lawrence into Montreal, then road to Toronto, with that leg quoted as its own line.
- SoundBlanket MLV
- 2100 kg per cubic metre. 2.5 mm STC 30 at 5.25 kg per sq m, 4 mm STC 34 at 8.4, 6 mm at 12.6
- BassBloc
- 1800 x 900 x 20 mm, 100 kg per cubic metre, NRC 0.85
- Principle
- Mass, then decoupling, then cavity absorption, then sealing
- Test standards
- ASTM E90 for the barrier, ASTM C423 for the absorber
- Lead time
- 4 to 7 working days for stock items
- ASTM E90 for the barrier, ASTM C423 for the absorber
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
This comes from our own plant, not a trading desk. We do not have an office in your city and we will not invent one. What we can give you is factory pricing, consistent material and a technical answer before you commit.
01 / What it is
The product, described honestly, for a Toronto brief
The blocking side of the range taken together: mass loaded vinyl, resilient layers, cavity absorption and the build-ups they belong in. This is the page for someone whose problem is noise getting through, not a room that sounds wrong.
Work reaching us from Toronto is mostly condominium towers, offices, studios, restaurants, schools, clinics.
Timber frame with gypsum board in low rise, concrete in towers. Condominium party walls and floors generate most complaints, and impact noise through a concrete slab needs a resilient layer, not a panel.
- Independent leaf A second wall that does not touch the first. Nothing else comes close for the money.
- Resilient bar Where a full independent leaf will not fit. Effective, and very easy to short circuit with one wrong screw.
- Floating floor Resilient layer and deck, to break impact energy before it reaches the structure.
- What it will not do Soundproofing fails at the gaps, not the materials. A service penetration, a back to back socket, or a door undercut will undo a correctly built wall.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for our soundproofing materials are on the main product page. This page covers what that means for a project in Toronto.
SoundBlanket mass loaded vinyl BassBloc sound absorber Wall soundproofing systems
02 / Specification
The published figures, unchanged by location
Nothing below changes by location. The decisions that do change are grade, thickness and how the material is mounted, and those are covered further down.
- Light retrofit2.5 mm membrane. Where depth is not available
- Standard partition4 mm membrane on an independent leaf. The common specification
- Heavy6 mm membrane and full decoupling. Plant, machine enclosure, low frequency
| SoundBlanket MLV | 2100 kg per cubic metre. 2.5 mm STC 30 at 5.25 kg per sq m, 4 mm STC 34 at 8.4, 6 mm at 12.6 |
|---|---|
| BassBloc | 1800 x 900 x 20 mm, 100 kg per cubic metre, NRC 0.85 |
| Principle | Mass, then decoupling, then cavity absorption, then sealing |
| Test standards | ASTM E90 for the barrier, ASTM C423 for the absorber |
On a Toronto job with a consultant involved, our part is material that matches the submitted data. See working with acoustic consultants.
03 / Local conditions
The Toronto conditions that change the answer
- Condo detail repeated at scale
The same party wall and floor assembly across thousands of units. If it underperforms it underperforms everywhere, so it is worth solving on the drawing.
- Concrete towers, hard interiors
The frame carries mass, so the recurring complaints are impact through slabs and rooms that are simply too live.
- Sealed against deep winters
Buildings close up for months with mechanical systems working hard, so noise accumulates inside.
- Plan the leg from Montreal
The container lands on the St Lawrence and drives in. We quote the sea leg and the road leg separately.
- Plant and HVAC
Forced air heating runs most of the year, so duct-borne noise and return air paths carry sound between rooms as reliably as the walls do.
- The housing stock
Timber frame with gypsum board in low rise, concrete in towers. Condominium party walls and floors generate most complaints, and impact noise through a concrete slab needs a resilient layer, not a panel.
For a Toronto practice, the useful thing is a detail you can put in a drawing set, not a brochure. See how we support architects.
04 / Climate
Why the climate in Toronto changes the material, not the target
Toronto is cool and damp, with long heating seasons and cold external walls, and that narrows the sensible material list before acoustics is even discussed.
Cold wall build-ups and long heating seasons mean interstitial condensation is a real risk behind any lining. PET felt is unaffected by damp air and will not feed mould where a fabric-faced mineral product would.
The risk we design against here is condensation behind linings in older, poorly insulated stock.
Designers get colour, pattern and CNC options with the absorption figure attached to each. See how we work with interior designers.
05 / Supply
Getting it to Toronto, with real dates
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Montreal, then road to Toronto |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Montreal, then road |
| Packing | Rolls on core tubes, boards palletised, fixings and tapes listed on the same packing list. |
| Lead time | 4 to 7 working days for stock items. |
Standard items dispatch in 4 to 7 working days. The sea leg from India is long, so plan the full door to door window into the programme. We give real dates, not optimistic ones.
Sea freight into Montreal, then road to Toronto. Air freight for samples and urgent quantities.
06 / Before you buy
Where this goes wrong, said plainly
-
The wrong product for the problem
Soundproofing fails at the gaps, not the materials. A service penetration, a back to back socket, or a door undercut will undo a correctly built wall. We would rather spend the conversation on the detail than on the product.
-
Coverage bought instead of a target
Lining every surface is a purchase, not a result. We would rather calculate the area against a reverberation target and sell you less of it.
-
A claim of being local to Toronto
We manufacture in India and supply here. We do not run an office in this city and we will not pretend to, because you would find out on the first site visit.
07 / In projects
How it looks once it is installed
Toronto: questions we are actually asked
Do you manufacture soundproofing materials in Toronto?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Toronto as the manufacturer rather than through a dealer. Made at our own plant in India and shipped up the St Lawrence into Montreal, then road to Toronto, with that leg quoted as its own line. You buy at factory prices with one consistent batch across the order.
Why would a Toronto build-up differ from anywhere else?
The same party wall and floor assembly across thousands of units. If it underperforms it underperforms everywhere, so it is worth solving on the drawing. The frame carries mass, so the recurring complaints are impact through slabs and rooms that are simply too live. Those two things move the build-up far more than the panel figure does.
How does the Toronto climate affect this product?
Toronto is cool and damp, with long heating seasons and cold external walls. Cold wall build-ups and long heating seasons mean interstitial condensation is a real risk behind any lining. PET felt is unaffected by damp air and will not feed mould where a fabric-faced mineral product would. The failure we design against here is condensation behind linings in older, poorly insulated stock.
What is the delivery time into Toronto?
ships from: Palwal, Haryana, India, arrives at: Montreal, then road to Toronto, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. The sea leg from India is long, so plan the full door to door window into the programme. We give real dates, not optimistic ones.
When are soundproofing materials the wrong purchase?
Soundproofing fails at the gaps, not the materials. A service penetration, a back to back socket, or a door undercut will undo a correctly built wall. We would rather spend the conversation on the detail than on the product.
What is the minimum order and how is it packed?
Minimum order is confirmed with the quote. Rolls on core tubes, boards palletised, fixings and tapes listed on the same packing list.
Next step
Drawings in, BOQ and a delivered date out
A plan and a section is enough. We will come back with a build-up, a BOQ and a delivered date, and we will say so if what you are asking for will not work.