For projects in Toronto
Office acoustics and soundproofing in Toronto
Three separate problems get called one problem: speech carrying across an open floor, meeting rooms that leak, and hard rooms that ring. Each has a different answer and mixing them up is how budgets get wasted. Forced air heating runs most of the year, so duct-borne noise and return air paths carry sound between rooms as reliably as the walls do.
- Open plan
- Distraction distance, not reverberation time. Ceiling absorption plus screens at the desk.
- Meeting rooms
- Privacy between rooms. That is partition and door work, not panels.
- Cabins and calls
- Short RT so a call sounds clean. A small amount of well placed absorber.
- Quote
- From a plan and a section, within 48 hours
01 / The material
What this is, and what it changes in a Toronto room
Three separate problems get called one problem: speech carrying across an open floor, meeting rooms that leak, and hard rooms that ring. Each has a different answer and mixing them up is how budgets get wasted.
Forced air heating runs most of the year, so duct-borne noise and return air paths carry sound between rooms as reliably as the walls do.
Work reaching us from Toronto is mostly condominium towers, offices, studios, restaurants, schools, clinics.
- Condo detail repeated at scale The same party wall and floor assembly across thousands of units. If it underperforms it underperforms everywhere, so it is worth solving on the drawing.
- Concrete towers, hard interiors The frame carries mass, so the recurring complaints are impact through slabs and rooms that are simply too live.
- Sealed against deep winters Buildings close up for months with mechanical systems working hard, so noise accumulates inside.
- Open plan Distraction distance, not reverberation time. Ceiling absorption plus screens at the desk.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for office acoustics are on the main product page. This page covers what that means for a project in Toronto.
Office and conference room acoustics Acoustic office screens
02 / The build-up
How the layers stack, from the structure inwards
-
Layer 1
PET felt acoustic panels
A rigid non-woven panel pressed from 100% polyester fibre, a large part of it recycled. In Toronto, forced air heating runs most of the year, so duct-borne noise and return air paths carry sound between rooms as reliably as the walls do.
Direct to wall. Panel bonded or mechanically fixed flat to the substrate. Simplest, and the weakest at low frequency.
-
Layer 2
Acoustic panels
The full absorber range rather than one product: plain PET felt, printed felt, grooved panels and fabric finishes, chosen by how the room is used and how it has to look. In Toronto, community centres, school gymnasiums and church halls carry speech, music and sport in the same hard volume.
Wall array. Panels placed at first reflection points rather than spread evenly. Fewer panels, better result.
-
Layer 3
SoundBlanket mass loaded vinyl
A limp, high density sheet that adds mass to a partition, floor or duct without adding depth. In Toronto, school buildings run hard floors and lay-in tile with long heating seasons and sealed envelopes, so rooms stay live and mechanical noise is always present.
Floor, floating. Membrane under a resilient layer and a floating deck, so impact energy is broken before it reaches the slab.
We would rather argue about the build-up at design stage than on site. See how we support architects.
03 / In this market
What decides the build-up in Toronto
- Condo detail repeated at scale
The same party wall and floor assembly across thousands of units. If it underperforms it underperforms everywhere, so it is worth solving on the drawing.
- Concrete towers, hard interiors
The frame carries mass, so the recurring complaints are impact through slabs and rooms that are simply too live.
- Sealed against deep winters
Buildings close up for months with mechanical systems working hard, so noise accumulates inside.
- Plan the leg from Montreal
The container lands on the St Lawrence and drives in. We quote the sea leg and the road leg separately.
- Plant and HVAC
Forced air heating runs most of the year, so duct-borne noise and return air paths carry sound between rooms as reliably as the walls do.
04 / Room by room
Space by space, for Toronto briefs
-
Open plan
Distraction distance, not reverberation time. Ceiling absorption plus screens at the desk. The same party wall and floor assembly across thousands of units. If it underperforms it underperforms everywhere, so it is worth solving on the drawing.
- PET felt acoustic panels, 100% PET non-woven, no added binder
- Acoustic carpet and rugs, 4 mm
- SoundBlanket mass loaded vinyl, STC 34, 8.4 kg per sq m
-
Meeting rooms
Privacy between rooms. That is partition and door work, not panels. The frame carries mass, so the recurring complaints are impact through slabs and rooms that are simply too live.
- PET felt acoustic panels, 9, 12, 18 and 24 mm standard, tolerance plus or minus 5 percent
- Acoustic carpet and rugs, High density polyester
- SoundBlanket mass loaded vinyl, 12.6 kg per sq m, STC on request
-
Cabins and calls
Short RT so a call sounds clean. A small amount of well placed absorber. Buildings close up for months with mechanical systems working hard, so noise accumulates inside.
- PET felt acoustic panels, 4 to 24 mm
- Acoustic carpet and rugs, Felt
- SoundBlanket mass loaded vinyl, 5 x 1.2 m, 6 sq m per roll
Designers get colour, pattern and CNC options with the absorption figure attached to each. See how we work with interior designers.
04 / Durability
Why the climate in Toronto changes the material, not the target
Toronto is cool and damp, with long heating seasons and cold external walls, and that narrows the material list before acoustics is discussed.
Cold wall build-ups and long heating seasons mean interstitial condensation is a real risk behind any lining. PET felt is unaffected by damp air and will not feed mould where a fabric-faced mineral product would.
The failure we design against here is condensation behind linings in older, poorly insulated stock.
If a consultant has set the target, we will quote against their figures rather than ours, and stay out of the scope they own. More on working with acoustic consultants.
06 / Before you buy
What we watch go wrong on jobs like this
-
Lining every wall while leaving the ceiling bare
A treated wall under a bare hard ceiling gives you a fraction of the reduction you paid for, and the room still sounds wrong.
-
Treating a privacy problem with absorption
Nobody has ever achieved speech privacy with a panel. Privacy needs mass, a sealed head detail and a door that actually closes.
-
Glass cabins specified without a door and head detail
Soundproofing fails at the gaps, not the materials. One unsealed service penetration can undo a correctly built wall.
-
Treating it as a generic Toronto job
The same party wall and floor assembly across thousands of units. If it underperforms it underperforms everywhere, so it is worth solving on the drawing.
05 / Supply
Getting it to Toronto, with real dates
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Montreal, then road to Toronto |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Montreal, then road |
| Support | Drawings, build-ups, BOQ and material that arrives complete |
Standard items dispatch in 4 to 7 working days. The sea leg from India is long, so plan the full door to door window into the programme. We give real dates, not optimistic ones.
Sea freight into Montreal, then road to Toronto. Air freight for samples and urgent quantities.
Questions from Toronto projects
What makes office acoustics and soundproofing different in Toronto?
Forced air heating runs most of the year, so duct-borne noise and return air paths carry sound between rooms as reliably as the walls do. The same party wall and floor assembly across thousands of units. If it underperforms it underperforms everywhere, so it is worth solving on the drawing.
Where should the budget go first on a Toronto project?
Open plan. Distraction distance, not reverberation time. Ceiling absorption plus screens at the desk. Meeting rooms. Privacy between rooms. That is partition and door work, not panels.
Do you have an office or installation team in Toronto?
No. We manufacture in India and supply into Toronto. We give you drawings, build-ups, a BOQ and material that arrives complete, and we will tell you plainly when a job needs a local contractor we cannot be.
How does material get to a Toronto site?
ships from: Palwal, Haryana, India, arrives at: Montreal, then road to Toronto, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. The sea leg from India is long, so plan the full door to door window into the programme. We give real dates, not optimistic ones.
What goes wrong most often on this kind of project?
Lining every wall while leaving the ceiling bare. Treating a privacy problem with absorption.
What do you need from us to quote?
A plan, a section through the critical partition or ceiling, and what the room is for. From that we can give a build-up and a BOQ rather than a price per square foot.
Next step
Drawings in, BOQ and a delivered date out
Send what you have. We will give you a layer by layer build-up, a bill of quantities and a date material lands, and we will flag anything in the brief that will not achieve what you want.