For projects in Thane
Venue and restaurant acoustics in Thane
Two different jobs that get quoted as one: keeping bass inside the building for the neighbours, and making the room comfortable enough that guests can talk. Solving one does nothing for the other. Auditoriums, banquet halls and places of worship are large hard volumes in concrete and stone where speech falls apart long before anyone calls the room echoey.
- Containment
- Low frequency through structure to flats above and beside. Mass, decoupling and a sealed envelope.
- Table level comfort
- Absorption at the ceiling so guests stop raising their voices at each other.
- Entrance and service
- Doors, lobbies and extract paths, which is where most of the leakage actually is.
- Quote
- From a plan and a section, within 48 hours
01 / The material
What this material is and where it earns its place in Thane
Two different jobs that get quoted as one: keeping bass inside the building for the neighbours, and making the room comfortable enough that guests can talk. Solving one does nothing for the other.
Auditoriums, banquet halls and places of worship are large hard volumes in concrete and stone where speech falls apart long before anyone calls the room echoey.
Work reaching us from Thane is mostly residential towers and redevelopment, offices, malls and retail, restaurants, schools, clinics.
- Impact noise from above Footfall through a slab is the most common complaint we get from this city. It is a floor problem, and treating the ceiling below rarely fixes it.
- Redevelopment at speed Old buildings replaced by towers, built fast to a fixed cost. Acoustic detail is easy to lose unless it is specified early.
- Lifts, pumps and services Shafts and pump rooms sit next to bedrooms in tight plans. That is an isolation job at the source.
- Containment Low frequency through structure to flats above and beside. Mass, decoupling and a sealed envelope.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for venue soundproofing are on the main product page. This page covers what that means for a project in Thane.
Nightclub and venue soundproofing SoundBlanket mass loaded vinyl
02 / The build-up
The build-up, layer by layer
-
Layer 1
Acoustic panels
The full absorber range rather than one product: plain PET felt, printed felt, grooved panels and fabric finishes, chosen by how the room is used and how it has to look. In Thane, split units, VRF outdoor banks and diesel generator sets sit close to occupied areas, often on the same terrace as a bedroom. Generator enclosure and condenser screening are the recurring jobs.
Mixed finish. Plain felt where it is out of eye line, printed or grooved where it is seen.
-
Layer 2
Wooden slat acoustic panels
Timber slats on an acoustic backing. In Thane, auditoriums, banquet halls and places of worship are large hard volumes in concrete and stone where speech falls apart long before anyone calls the room echoey.
Slats on a cavity. Backing plus an air gap behind moves absorption lower, which matters in music rooms.
-
Layer 3
Acoustic carpet and rugs
A tile carpet with a dense polyester face on a felt backing. In Thane, schools range from compact municipal buildings to large private campuses, all hard surfaced, with assembly halls doing duty as performance spaces.
Zoned. Carpet in the circulation and meeting zones, hard floor elsewhere, so the treatment sits where the noise is made.
If you are specifying for a Thane project, we can give you a section, a BOQ and the honest limits of each layer. See how we support architects.
03 / In this market
What the buildings in Thane do to the specification
- Impact noise from above
Footfall through a slab is the most common complaint we get from this city. It is a floor problem, and treating the ceiling below rarely fixes it.
- Redevelopment at speed
Old buildings replaced by towers, built fast to a fixed cost. Acoustic detail is easy to lose unless it is specified early.
- Lifts, pumps and services
Shafts and pump rooms sit next to bedrooms in tight plans. That is an isolation job at the source.
- Coastal humidity
PET felt does not absorb moisture or feed mould, which matters where monsoon damp defeats mineral products.
- Assembly and performance rooms
Auditoriums, banquet halls and places of worship are large hard volumes in concrete and stone where speech falls apart long before anyone calls the room echoey.
04 / Room by room
Space by space, for Thane briefs
-
Containment
Low frequency through structure to flats above and beside. Mass, decoupling and a sealed envelope. Footfall through a slab is the most common complaint we get from this city. It is a floor problem, and treating the ceiling below rarely fixes it.
- SoundBlanket mass loaded vinyl, 2100 kg per cubic metre
- Acoustic panels, 1800 x 900 mm, image printed into the felt rather than onto a facing
- Acoustic carpet and rugs, High density polyester
-
Table level comfort
Absorption at the ceiling so guests stop raising their voices at each other. Old buildings replaced by towers, built fast to a fixed cost. Acoustic detail is easy to lose unless it is specified early.
- SoundBlanket mass loaded vinyl, STC 30, 5.25 kg per sq m
- Acoustic panels, Cut pattern in PET felt, adds visual rhythm without changing the absorber
- Acoustic carpet and rugs, Felt
-
Entrance and service
Doors, lobbies and extract paths, which is where most of the leakage actually is. Shafts and pump rooms sit next to bedrooms in tight plans. That is an isolation job at the source.
- SoundBlanket mass loaded vinyl, STC 34, 8.4 kg per sq m
- Acoustic panels, ASTM C423
- Acoustic carpet and rugs, 64 sq ft per pack
If the visual is fixed and the room still has to perform, that is a solvable problem and a conversation worth having early. See how we work with interior designers.
04 / Climate and durability
Durability in Thane, before acoustics is discussed
Thane is warm and humid through most of the year, with a long wet season, and that narrows the material list before acoustics is discussed.
Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them.
The failure we design against here is mould, sagging fabric finishes and swelling in timber.
Consultants get the raw data, not a sales sheet. That is the whole of our side of the job, and it is set out under working with acoustic consultants.
06 / Worth knowing
The six errors that cost the most
-
Panels on the wall as a neighbour noise solution
This is the one that comes back as a second fit-out rather than a snag.
-
A lobby with both doors able to open at once
A gap undoes the partition it sits in. Sealing is the cheapest line on the quote and the first one to get cut.
-
Extract ducting that bypasses every wall you built
Noise with a source is fixed at the source. Treating the receiving room is the expensive way to get a small result.
-
Treating it as a generic Thane job
Footfall through a slab is the most common complaint we get from this city. It is a floor problem, and treating the ceiling below rarely fixes it.
05 / Supply
What the route into Thane actually looks like
| Made at | Our own plant, Palwal, Haryana |
|---|---|
| Reaches site in | three to four days |
| Dispatch | 2 to 4 working days |
| To site | three to four days |
| Support | Drawings, build-ups, BOQ and material that arrives complete |
Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
By road from Palwal, roughly fourteen hundred kilometres, normally three to four days on a dedicated truck.
Questions from Thane projects
What makes venue and restaurant acoustics different in Thane?
Auditoriums, banquet halls and places of worship are large hard volumes in concrete and stone where speech falls apart long before anyone calls the room echoey. Footfall through a slab is the most common complaint we get from this city. It is a floor problem, and treating the ceiling below rarely fixes it.
Where should the budget go first on a Thane project?
Containment. Low frequency through structure to flats above and beside. Mass, decoupling and a sealed envelope. Table level comfort. Absorption at the ceiling so guests stop raising their voices at each other.
Do you have an office or installation team in Thane?
No. We manufacture in India and supply into Thane. We give you drawings, build-ups, a BOQ and material that arrives complete, and we will tell you plainly when a job needs a local contractor we cannot be.
How does material get to a Thane site?
made at: Our own plant, Palwal, Haryana, reaches site in: three to four days, dispatch: 2 to 4 working days. Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
What goes wrong most often on this kind of project?
Panels on the wall as a neighbour noise solution. A lobby with both doors able to open at once.
What do you need from us to quote?
A plan, a section through the critical partition or ceiling, and what the room is for. From that we can give a build-up and a BOQ rather than a price per square foot.
Next step
Send a plan and a section, get a real build-up
A plan and a section is enough. We will come back with a build-up, a BOQ and a delivered date, and we will say so if what you are asking for will not work.