For projects in Taiwan
Home theatre soundproofing and acoustics in Taiwan
Serious equipment in a room with no isolation plan. The complaint is almost never the speakers. It is bass leaving the room and an untreated box making the system sound worse than it is. Reinforced concrete towers and older walk ups with hard tile floors, sitting very close together on narrow streets.
- Containment
- Bass through the wall, floor and door. Mass and decoupling, with the door usually the weakest point.
- Low frequency inside
- Corner absorption with depth, before any surface treatment.
- Reflections
- Side wall and ceiling first reflection points at the seating position.
- Quote
- From a plan and a section, within 48 hours
01 / The material
What you are buying, and what it fixes in Taiwan
Serious equipment in a room with no isolation plan. The complaint is almost never the speakers. It is bass leaving the room and an untreated box making the system sound worse than it is.
Reinforced concrete towers and older walk ups with hard tile floors, sitting very close together on narrow streets.
Work reaching us from Taiwan is mostly manufacturing and measurement rooms, apartments, offices, hotels, schools, hospitals.
- Measurement rooms are unforgiving A test or metrology space needs a genuinely low background before any reading means anything. That is isolation against a written target.
- Built to move Seismic detailing means junctions that must stay flexible. An acoustic layer cannot bridge a movement joint rigidly.
- Dense apartment living Concrete blocks where impact through the slab is the recurring complaint rather than airborne transfer.
- Containment Bass through the wall, floor and door. Mass and decoupling, with the door usually the weakest point.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for home theatre soundproofing are on the main product page. This page covers what that means for a project in Taiwan.
02 / The build-up
What goes where, from the structure in
-
Layer 1
SoundBlanket mass loaded vinyl
A limp, high density sheet that adds mass to a partition, floor or duct without adding depth. In Taiwan, split units and VRF with condensers on facades and in narrow gaps between buildings.
Duct and plant wrap. Membrane wrapped over the duct with a decoupling layer beneath, sealed at every lap.
-
Layer 2
Soundproofing materials
The blocking side of the range taken together: mass loaded vinyl, resilient layers, cavity absorption and the build-ups they belong in. In Taiwan, temples, halls and auditoria are hard volumes carrying amplified speech and music.
Independent leaf. A second wall that does not touch the first. Nothing else comes close for the money.
-
Layer 3
Acoustic carpet and rugs
A tile carpet with a dense polyester face on a felt backing. In Taiwan, classrooms are hard and naturally ventilated with long corridors and large assembly halls.
Loose lay on tackifier. Tiles lifted individually for access under a raised floor, which is why tile beats broadloom in an office.
We would rather argue about the build-up at design stage than on site. See how we support architects.
03 / In this market
What we see driving Taiwan briefs
- Measurement rooms are unforgiving
A test or metrology space needs a genuinely low background before any reading means anything. That is isolation against a written target.
- Built to move
Seismic detailing means junctions that must stay flexible. An acoustic layer cannot bridge a movement joint rigidly.
- Dense apartment living
Concrete blocks where impact through the slab is the recurring complaint rather than airborne transfer.
- Typhoons and humidity
PET felt does not hold moisture or feed mould, which matters through a humid season in a sealed room.
- The housing stock
Reinforced concrete towers and older walk ups with hard tile floors, sitting very close together on narrow streets.
04 / Room by room
Space by space, for Taiwan briefs
-
Containment
Bass through the wall, floor and door. Mass and decoupling, with the door usually the weakest point. A test or metrology space needs a genuinely low background before any reading means anything. That is isolation against a written target.
- SoundBlanket mass loaded vinyl, 2100 kg per cubic metre
- Soundproofing materials, 1800 x 900 x 20 mm, 100 kg per cubic metre, NRC 0.85
- Soundproof curtains, 5.5 kg per sq m
-
Low frequency inside
Corner absorption with depth, before any surface treatment. Seismic detailing means junctions that must stay flexible. An acoustic layer cannot bridge a movement joint rigidly.
- SoundBlanket mass loaded vinyl, STC 30, 5.25 kg per sq m
- Soundproofing materials, Mass, then decoupling, then cavity absorption, then sealing
- Soundproof curtains, Up to 30 dB
-
Reflections
Side wall and ceiling first reflection points at the seating position. Concrete blocks where impact through the slab is the recurring complaint rather than airborne transfer.
- SoundBlanket mass loaded vinyl, STC 34, 8.4 kg per sq m
- Soundproofing materials, ASTM E90 for the barrier, ASTM C423 for the absorber
- Soundproof curtains, 30
Interior designers tend to arrive with the look already decided. We will tell you which finish gets there without losing the acoustics. See how we work with interior designers.
04 / Climate and durability
The Taiwan climate decides the material list
Taiwan is hot summers, mild winters and a distinct wet season, and that narrows the material list before acoustics is discussed.
PET felt handles the wet months without absorbing moisture or feeding mould. Timber and wood wool want a ventilated cavity and a stable indoor RH.
The failure we design against here is wet-season humidity behind linings.
Consultants get the raw data, not a sales sheet. That is the whole of our side of the job, and it is set out under working with acoustic consultants.
06 / Straight talk
What we watch go wrong on jobs like this
-
Foam on the walls as a soundproofing measure
Small on the drawing, expensive on site, and almost always found after handover.
-
A standard door on a room built to hold bass
Soundproofing fails at the gaps, not the materials. One unsealed service penetration can undo a correctly built wall.
-
Treating before the room is sealed
A gap undoes the partition it sits in. Sealing is the cheapest line on the quote and the first one to get cut.
-
Treating it as a generic Taiwan job
A test or metrology space needs a genuinely low background before any reading means anything. That is isolation against a written target.
05 / Route to site
Supply into Taiwan, start to site
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Kaohsiung or Taipei, then road to site |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Kaohsiung |
| Support | Drawings, build-ups, BOQ and material that arrives complete |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Sea freight into Kaohsiung or Taipei, then road to site. Air freight for samples and urgent quantities.
Questions from Taiwan projects
What makes home theatre soundproofing and acoustics different in Taiwan?
Reinforced concrete towers and older walk ups with hard tile floors, sitting very close together on narrow streets. A test or metrology space needs a genuinely low background before any reading means anything. That is isolation against a written target.
Where should the budget go first on a Taiwan project?
Containment. Bass through the wall, floor and door. Mass and decoupling, with the door usually the weakest point. Low frequency inside. Corner absorption with depth, before any surface treatment.
Do you have an office or installation team in Taiwan?
No. We manufacture in India and supply into Taiwan. We give you drawings, build-ups, a BOQ and material that arrives complete, and we will tell you plainly when a job needs a local contractor we cannot be.
How does material get to a Taiwan site?
ships from: Palwal, Haryana, India, arrives at: Kaohsiung or Taipei, then road to site, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
What goes wrong most often on this kind of project?
Foam on the walls as a soundproofing measure. A standard door on a room built to hold bass.
What do you need from us to quote?
A plan, a section through the critical partition or ceiling, and what the room is for. From that we can give a build-up and a BOQ rather than a price per square foot.
Next step
Drawings in, BOQ and a delivered date out
We quote from drawings, not from a square foot rate. Send a plan and the section through the critical wall or ceiling and you will get something you can actually build from.