Manufactured in India, supplied in Taiwan
Ceiling baffles and clouds in Taiwan
We manufacture ceiling baffles and clouds at our own plant at Palwal in Haryana, India, and supply them into Taiwan. Made at our own plant in India and shipped into Kaohsiung or Taipei, then road to site.
- Material
- 100% PET non-woven, the panel family
- Thickness
- 9 to 24 mm
- Size
- Made to the drawing, standard and custom
- Exposure
- Both faces work, which is why suspended area outperforms the same area laid flat
- Test standard
- ASTM C423
- Lead time
- Confirmed against the drawing
- Minimum order
- 500 sq ft, about 46 sq m
- ASTM C423
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
This comes from our own plant, not a trading desk. We do not have an office in your city and we will not invent one. What we can give you is factory pricing, consistent material and a technical answer before you commit.
01 / Start here
The material, and what it actually does on a Taiwan job
PET felt suspended from the soffit, vertically as baffles or horizontally as clouds. It is how you treat a room with exposed services, where there is no ceiling to line.
Work reaching us from Taiwan is mostly manufacturing and measurement rooms, apartments, offices, hotels, schools, hospitals.
Reinforced concrete towers and older walk ups with hard tile floors, sitting very close together on narrow streets.
- Vertical baffles Hung on edge in rows. Both faces absorb, so coverage figures based on plan area understate them.
- Horizontal clouds Flat rafts over the occupied zone, which also reflect early speech energy back down where it helps.
- Mixed with services Set out around ducts, trays and lighting rather than fighting them, coordinated from your reflected ceiling plan.
- What it will not do Baffles are efficient, not magic. In a very tall volume the height above the baffle line still rings, and the honest answer is either more area or accepting a higher RT, not a denser panel.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for baffles and clouds are on the main product page. This page covers what that means for a project in Taiwan.
Acoustic ceiling baffles Acoustic ceiling clouds Acoustic ceiling tiles
02 / The numbers
Published specification, identical wherever we ship it
Nothing below changes by location. The decisions that do change are grade, thickness and how the material is mounted, and those are covered further down.
- EchoCore 151500 GSM. Offices, retail, general
- EchoPro 181800 GSM. Halls, atria, spaces with a target
- EchoMax 222200 GSM. High volume and high occupancy
| Material | 100% PET non-woven, the panel family |
|---|---|
| Thickness | 9 to 24 mm |
| Size | Made to the drawing, standard and custom |
| Exposure | Both faces work, which is why suspended area outperforms the same area laid flat |
| Test standard | ASTM C423 |
Where a consultant is already engaged on a Taiwan project, we supply to their specification and send the test reports rather than describing them. More on working with acoustic consultants.
03 / On the ground
What decides the build-up in Taiwan
- Typhoons and humidity
PET felt does not hold moisture or feed mould, which matters through a humid season in a sealed room.
- Measurement rooms are unforgiving
A test or metrology space needs a genuinely low background before any reading means anything. That is isolation against a written target.
- Built to move
Seismic detailing means junctions that must stay flexible. An acoustic layer cannot bridge a movement joint rigidly.
- Dense apartment living
Concrete blocks where impact through the slab is the recurring complaint rather than airborne transfer.
- School and campus buildings
Classrooms are hard and naturally ventilated with long corridors and large assembly halls.
Architects working in Taiwan usually need the build-up before the product. We will draw the section and mark what does the work. See how we support architects.
04 / Durability
The Taiwan climate decides the material list
Taiwan is hot summers, mild winters and a distinct wet season, and that narrows the sensible material list before acoustics is even discussed.
PET felt handles the wet months without absorbing moisture or feeding mould. Timber and wood wool want a ventilated cavity and a stable indoor RH.
The risk we design against here is wet-season humidity behind linings.
Designers get colour, pattern and CNC options with the absorption figure attached to each. See how we work with interior designers.
05 / Route to site
Getting it to Taiwan, with real dates
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Kaohsiung or Taipei, then road to site |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Kaohsiung |
| Packing | Flat packed with fixings, sets labelled by row so the install sequence matches the drawing. |
| Lead time | Confirmed against the drawing. Standard sizes 4 to 7 working days. |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Sea freight into Kaohsiung or Taipei, then road to site. Air freight for samples and urgent quantities.
The same 500 sq ft minimum applies on export.
| Baffles and clouds | 500 sq ft, about 46 sq m |
|---|
Baffles and clouds are cut to the drawing, so the minimum is counted on finished panel area. Both faces of a hung baffle absorb, which is why coverage taken off a plan understates what the order actually does.
06 / Before you buy
Where this goes wrong, said plainly
-
The wrong product for the problem
Baffles are efficient, not magic. In a very tall volume the height above the baffle line still rings, and the honest answer is either more area or accepting a higher RT, not a denser panel.
-
Coverage bought instead of a target
Lining every surface is a purchase, not a result. We would rather calculate the area against a reverberation target and sell you less of it.
-
A claim of being local to Taiwan
We manufacture in India and supply here. We do not run an office in this city and we will not pretend to, because you would find out on the first site visit.
Taiwan: questions we are actually asked
Where are the ceiling baffles and clouds you supply to Taiwan actually made?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Taiwan as the manufacturer rather than through a dealer. Made at our own plant in India and shipped into Kaohsiung or Taipei, then road to site. You buy at factory prices with one consistent batch across the order.
What changes the specification on a Taiwan job?
A test or metrology space needs a genuinely low background before any reading means anything. That is isolation against a written target. Seismic detailing means junctions that must stay flexible. An acoustic layer cannot bridge a movement joint rigidly. Those two things move the build-up far more than the panel figure does.
Will this material last in the Taiwan climate?
Taiwan is hot summers, mild winters and a distinct wet season. PET felt handles the wet months without absorbing moisture or feeding mould. Timber and wood wool want a ventilated cavity and a stable indoor RH. The failure we design against here is wet-season humidity behind linings.
When would material land on a Taiwan site?
ships from: Palwal, Haryana, India, arrives at: Kaohsiung or Taipei, then road to site, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
What should you not buy ceiling baffles and clouds for?
Baffles are efficient, not magic. In a very tall volume the height above the baffle line still rings, and the honest answer is either more area or accepting a higher RT, not a denser panel.
Is there a minimum order, and how does it arrive?
The same 500 sq ft minimum applies on export. Baffles and clouds, 500 sq ft, about 46 sq m. Baffles and clouds are cut to the drawing, so the minimum is counted on finished panel area. Both faces of a hung baffle absorb, which is why coverage taken off a plan understates what the order actually does. Flat packed with fixings, sets labelled by row so the install sequence matches the drawing.
Next step
Drawings in, BOQ and a delivered date out
Send what you have. We will give you a layer by layer build-up, a bill of quantities and a date material lands, and we will flag anything in the brief that will not achieve what you want.