Manufactured in India, supplied in Taiwan
Acoustic panels in Taiwan
We manufacture acoustic panels at our own plant at Palwal in Haryana, India, and supply them into Taiwan. Made at our own plant in India and shipped into Kaohsiung or Taipei, then road to site.
- Plain PET felt
- 9 to 24 mm, 1220 x 2440 mm standard, up to 2440 x 4270 mm, 1200 to 3600 GSM
- Printed felt
- 1800 x 900 mm, image printed into the felt rather than onto a facing
- Grooved panels
- Cut pattern in PET felt, adds visual rhythm without changing the absorber
- Test standard
- ASTM C423
- Lead time
- 4 to 7 working days standard
- Minimum order
- From 10 panels
- ASTM C423
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
We make this ourselves and ship it to you. No local branch, no borrowed certifications, no dealer margin. One batch across the whole order, and an honest answer when the product is wrong for the problem.
01 / The material
What this material is and where it earns its place in Taiwan
The full absorber range rather than one product: plain PET felt, printed felt, grooved panels and fabric finishes, chosen by how the room is used and how it has to look.
Work reaching us from Taiwan is mostly manufacturing and measurement rooms, apartments, offices, hotels, schools, hospitals.
Reinforced concrete towers and older walk ups with hard tile floors, sitting very close together on narrow streets.
- Wall array Panels placed at first reflection points rather than spread evenly. Fewer panels, better result.
- Ceiling first In most rooms the ceiling is the largest untreated surface and the cheapest square metre of result.
- Mixed finish Plain felt where it is out of eye line, printed or grooved where it is seen.
- What it will not do Coverage is not the target, reverberation time is. Lining every surface wastes money and can leave a room sounding dead and unpleasant.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for our acoustic panel range are on the main product page. This page covers what that means for a project in Taiwan.
PET felt acoustic panels Printed acoustic felt panels Grooved PET panels
02 / Data sheet
The published figures, unchanged by location
Nothing below changes by location. The decisions that do change are grade, thickness and how the material is mounted, and those are covered further down.
- EchoCore 151500 GSM. General commercial
- EchoPro 181800 GSM. Rooms with a written RT target
- EchoMax 222200 GSM. High occupancy and high level spaces
| Plain PET felt | 9 to 24 mm, 1220 x 2440 mm standard, up to 2440 x 4270 mm, 1200 to 3600 GSM |
|---|---|
| Printed felt | 1800 x 900 mm, image printed into the felt rather than onto a facing |
| Grooved panels | Cut pattern in PET felt, adds visual rhythm without changing the absorber |
| Test standard | ASTM C423 |
Where a consultant is already engaged on a Taiwan project, we supply to their specification and send the test reports rather than describing them. More on working with acoustic consultants.
03 / Local conditions
What the buildings in Taiwan do to the specification
- Typhoons and humidity
PET felt does not hold moisture or feed mould, which matters through a humid season in a sealed room.
- Measurement rooms are unforgiving
A test or metrology space needs a genuinely low background before any reading means anything. That is isolation against a written target.
- Built to move
Seismic detailing means junctions that must stay flexible. An acoustic layer cannot bridge a movement joint rigidly.
- Dense apartment living
Concrete blocks where impact through the slab is the recurring complaint rather than airborne transfer.
- School and campus buildings
Classrooms are hard and naturally ventilated with long corridors and large assembly halls.
- The studio and content scene
A strong music and content sector working inside commercial floors with thin partitions.
Architects working in Taiwan usually need the build-up before the product. We will draw the section and mark what does the work. See how we support architects.
04 / Climate
The Taiwan climate decides the material list
Taiwan is hot summers, mild winters and a distinct wet season, and that narrows the sensible material list before acoustics is even discussed.
PET felt handles the wet months without absorbing moisture or feeding mould. Timber and wood wool want a ventilated cavity and a stable indoor RH.
The risk we design against here is wet-season humidity behind linings.
Interior designers tend to arrive with the look already decided. We will tell you which finish gets there without losing the acoustics. See how we work with interior designers.
05 / Getting it there
Supply into Taiwan, start to site
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Kaohsiung or Taipei, then road to site |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Kaohsiung |
| Packing | Palletised flat and film wrapped. Printed panels interleaved and corner protected. |
| Lead time | 4 to 7 working days standard. Printed and grooved take longer. |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Sea freight into Kaohsiung or Taipei, then road to site. Air freight for samples and urgent quantities.
200 panels for a trial order, in any mix of thickness, GSM and colour. Beyond a trial we would rather quote a container load.
| Trial order | 200 panels, 6,400 sq ft, mixed thickness, GSM and colour |
|---|---|
| Recommended | Full container |
A panel is 1220 x 2440 mm, which is 32 sq ft.
06 / Read this first
Where this goes wrong, said plainly
-
The wrong product for the problem
Coverage is not the target, reverberation time is. Lining every surface wastes money and can leave a room sounding dead and unpleasant. We would rather calculate the area than sell the wall.
-
Square footage quoted before the room is understood
Anyone can price a wall. Working out how much material the room actually needs usually reduces the order, which is why not everyone does it.
-
Suppliers who imply a Taiwan presence
Ask any supplier where the material is made and who carries the warranty. We make it at Palwal in Haryana and we say so on every page, including this one.
07 / In projects
How it looks once it is installed
Taiwan: questions we are actually asked
Where are the acoustic panels you supply to Taiwan actually made?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Taiwan as the manufacturer rather than through a dealer. Made at our own plant in India and shipped into Kaohsiung or Taipei, then road to site. You buy at factory prices with one consistent batch across the order.
Why would a Taiwan build-up differ from anywhere else?
A test or metrology space needs a genuinely low background before any reading means anything. That is isolation against a written target. Seismic detailing means junctions that must stay flexible. An acoustic layer cannot bridge a movement joint rigidly. Those two things move the build-up far more than the panel figure does.
Does Taiwan weather shorten the life of this material?
Taiwan is hot summers, mild winters and a distinct wet season. PET felt handles the wet months without absorbing moisture or feeding mould. Timber and wood wool want a ventilated cavity and a stable indoor RH. The failure we design against here is wet-season humidity behind linings.
What is the delivery time into Taiwan?
ships from: Palwal, Haryana, India, arrives at: Kaohsiung or Taipei, then road to site, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
When are acoustic panels the wrong purchase?
Coverage is not the target, reverberation time is. Lining every surface wastes money and can leave a room sounding dead and unpleasant. We would rather calculate the area than sell the wall.
How is the order packed and what is the minimum?
200 panels for a trial order, in any mix of thickness, GSM and colour. Beyond a trial we would rather quote a container load. Trial order, 200 panels, 6,400 sq ft, mixed thickness, GSM and colour. Recommended, Full container. A panel is 1220 x 2440 mm, which is 32 sq ft. Palletised flat and film wrapped. Printed panels interleaved and corner protected.
Next step
Send a plan and a section, get a real build-up
A plan and a section is enough. We will come back with a build-up, a BOQ and a delivered date, and we will say so if what you are asking for will not work.