For projects in Singapore
Cinema and multiplex soundproofing in Singapore
Screens stacked beside and above each other, each running full range at high level. Bleed between auditoria is the failure everyone hears, and it is decided by the shell, not the finishes. Places of worship, auditoria and function rooms are hard volumes where a long tail defeats speech.
- Screen to screen
- Independent construction between auditoria, with services broken at the line.
- In room response
- Heavy absorption on side and rear walls so the mix is heard as intended.
- Plant and projection
- Equipment noise into the auditorium, treated at source.
- Quote
- From a plan and a section, within 48 hours
01 / What it is
The product, described honestly, for a Singapore brief
Screens stacked beside and above each other, each running full range at high level. Bleed between auditoria is the failure everyone hears, and it is decided by the shell, not the finishes.
Places of worship, auditoria and function rooms are hard volumes where a long tail defeats speech.
Work reaching us from Singapore is mostly apartments and condominiums, offices, hotels, schools, hospitals, studios.
- A very short sea leg Western India to Singapore is quick and frequently served, which makes modest and repeat consignments genuinely practical.
- Concrete towers, live interiors The structure blocks well. The problem is tile, glass and stone inside, plus impact passing down through slabs.
- Tropical humidity all year PET felt does not absorb moisture, shed fibre or feed mould, which matters where mineral products sag within a couple of seasons.
- Screen to screen Independent construction between auditoria, with services broken at the line.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for cinema soundproofing are on the main product page. This page covers what that means for a project in Singapore.
02 / The build-up
How the layers stack, from the structure inwards
-
Layer 1
SoundBlanket mass loaded vinyl
A limp, high density sheet that adds mass to a partition, floor or duct without adding depth. In Singapore, central plant, VRF and split units running at full load year round, with risers and duct runs carrying noise between floors.
Duct and plant wrap. Membrane wrapped over the duct with a decoupling layer beneath, sealed at every lap.
-
Layer 2
Acoustic panels
The full absorber range rather than one product: plain PET felt, printed felt, grooved panels and fabric finishes, chosen by how the room is used and how it has to look. In Singapore, places of worship, auditoria and function rooms are hard volumes where a long tail defeats speech.
Wall array. Panels placed at first reflection points rather than spread evenly. Fewer panels, better result.
-
Layer 3
PET felt acoustic panels
A rigid non-woven panel pressed from 100% polyester fibre, a large part of it recycled. In Singapore, school buildings are hard surfaced and naturally ventilated, with open corridors and large halls that carry everything.
Direct to wall. Panel bonded or mechanically fixed flat to the substrate. Simplest, and the weakest at low frequency.
For a Singapore practice, the useful thing is a detail you can put in a drawing set, not a brochure. See how we support architects.
03 / In this market
What we see driving Singapore briefs
- A very short sea leg
Western India to Singapore is quick and frequently served, which makes modest and repeat consignments genuinely practical.
- Concrete towers, live interiors
The structure blocks well. The problem is tile, glass and stone inside, plus impact passing down through slabs.
- Tropical humidity all year
PET felt does not absorb moisture, shed fibre or feed mould, which matters where mineral products sag within a couple of seasons.
- Everything is documented
Send the specification and we will tell you in writing where our material sits against it, and where it does not.
- Assembly and performance rooms
Places of worship, auditoria and function rooms are hard volumes where a long tail defeats speech.
04 / Room by room
Space by space, for Singapore briefs
-
Screen to screen
Independent construction between auditoria, with services broken at the line. Western India to Singapore is quick and frequently served, which makes modest and repeat consignments genuinely practical.
- SoundBlanket mass loaded vinyl, 2100 kg per cubic metre
- Soundproofing materials, 1800 x 900 x 20 mm, 100 kg per cubic metre, NRC 0.85
- Acoustic carpet and rugs, High density polyester
-
In room response
Heavy absorption on side and rear walls so the mix is heard as intended. The structure blocks well. The problem is tile, glass and stone inside, plus impact passing down through slabs.
- SoundBlanket mass loaded vinyl, STC 30, 5.25 kg per sq m
- Soundproofing materials, Mass, then decoupling, then cavity absorption, then sealing
- Acoustic carpet and rugs, Felt
-
Plant and projection
Equipment noise into the auditorium, treated at source. PET felt does not absorb moisture, shed fibre or feed mould, which matters where mineral products sag within a couple of seasons.
- SoundBlanket mass loaded vinyl, STC 34, 8.4 kg per sq m
- Soundproofing materials, ASTM E90 for the barrier, ASTM C423 for the absorber
- Acoustic carpet and rugs, 64 sq ft per pack
For a Singapore interior where the finish leads, we will say plainly what each option costs you acoustically. See how we work with interior designers.
04 / Conditions
Durability in Singapore, before acoustics is discussed
Singapore is warm and humid through most of the year, with a long wet season, and that narrows the material list before acoustics is discussed.
Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them.
The failure we design against here is mould, sagging fabric finishes and swelling in timber.
If a consultant has set the target, we will quote against their figures rather than ours, and stay out of the scope they own. More on working with acoustic consultants.
06 / Worth knowing
Where this kind of project usually fails
-
A shared service void running across the wall line
Square metre for square metre the ceiling is the cheapest result in the room. Skipping it and buying wall panels instead is the most common way to overspend.
-
Treating the auditorium to fix bleed from the next screen
Small on the drawing, expensive on site, and almost always found after handover.
-
Doors and lobbies specified late and undersized
A gap undoes the partition it sits in. Sealing is the cheapest line on the quote and the first one to get cut.
-
Treating it as a generic Singapore job
Western India to Singapore is quick and frequently served, which makes modest and repeat consignments genuinely practical.
05 / Supply
How material reaches a Singapore site
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Singapore, then a short road run to site |
| Dispatch | 4 to 7 working days |
| Freight | Sea into Singapore |
| Support | Drawings, build-ups, BOQ and material that arrives complete |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Sea freight direct into Singapore, then a short road run to site. Air freight for samples and urgent quantities.
Questions from Singapore projects
What makes cinema and multiplex soundproofing different in Singapore?
Places of worship, auditoria and function rooms are hard volumes where a long tail defeats speech. Western India to Singapore is quick and frequently served, which makes modest and repeat consignments genuinely practical.
Where should the budget go first on a Singapore project?
Screen to screen. Independent construction between auditoria, with services broken at the line. In room response. Heavy absorption on side and rear walls so the mix is heard as intended.
Do you have an office or installation team in Singapore?
No. We manufacture in India and supply into Singapore. We give you drawings, build-ups, a BOQ and material that arrives complete, and we will tell you plainly when a job needs a local contractor we cannot be.
How does material get to a Singapore site?
ships from: Palwal, Haryana, India, arrives at: Singapore, then a short road run to site, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
What goes wrong most often on this kind of project?
A shared service void running across the wall line. Treating the auditorium to fix bleed from the next screen.
What do you need from us to quote?
A plan, a section through the critical partition or ceiling, and what the room is for. From that we can give a build-up and a BOQ rather than a price per square foot.
Next step
Drawings in, BOQ and a delivered date out
We quote from drawings, not from a square foot rate. Send a plan and the section through the critical wall or ceiling and you will get something you can actually build from.