Manufactured in India, supplied in Singapore
Acoustic carpet and rugs in Singapore
We manufacture acoustic carpet and rugs at our own plant at Palwal in Haryana, India, and supply them into Singapore. Made at our own plant in India and shipped straight into Singapore, one of the shortest and most frequently served runs we operate.
- Tile size
- 500 x 500 mm
- Thickness
- 4 mm
- Face
- High density polyester
- Backing
- Felt
- Pack coverage
- 64 sq ft per pack
- Lead time
- 4 to 7 working days
- Minimum order
- From 320 sq ft
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
- Test reports sent on request, not just quoted
This comes from our own plant, not a trading desk. We do not have an office in your city and we will not invent one. What we can give you is factory pricing, consistent material and a technical answer before you commit.
01 / What it is
The material, and what it actually does on a Singapore job
A tile carpet with a dense polyester face on a felt backing. It absorbs at the floor and, more usefully, kills footfall and chair scrape at the point they are generated.
Work reaching us from Singapore is mostly apartments and condominiums, offices, hotels, schools, hospitals, studios.
HDB and condominium towers in reinforced concrete with hard floors. Mass is good, impact noise through the slab and live rooms are the complaints.
- Loose lay on tackifier Tiles lifted individually for access under a raised floor, which is why tile beats broadloom in an office.
- Over a resilient underlay Where impact noise to the floor below is the actual complaint, the underlay does that work, not the carpet.
- Zoned Carpet in the circulation and meeting zones, hard floor elsewhere, so the treatment sits where the noise is made.
- What it will not do Carpet fixes footfall and chair noise and takes the edge off a live room. It will not deliver a reverberation target on its own, because the ceiling is almost always the bigger surface.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for acoustic carpet and rugs are on the main product page. This page covers what that means for a project in Singapore.
02 / Specification sheet
One specification sheet, the same in every market
We publish one data sheet for every market. If a supplier quotes you a different figure for the same product in a different city, one of the two numbers is wrong.
- Standard tile4 mm. Offices, classrooms, studios, corridors
| Tile size | 500 x 500 mm |
|---|---|
| Thickness | 4 mm |
| Face | High density polyester |
| Backing | Felt |
| Pack coverage | 64 sq ft per pack |
| Boxed | 20 kg, 55 x 55 x 15 cm |
If a consultant has set the target, we will quote against their figures rather than ours, and stay out of the scope they own. More on working with acoustic consultants.
03 / On the ground
What we see driving Singapore briefs
- Concrete towers, live interiors
The structure blocks well. The problem is tile, glass and stone inside, plus impact passing down through slabs.
- Tropical humidity all year
PET felt does not absorb moisture, shed fibre or feed mould, which matters where mineral products sag within a couple of seasons.
- A very short sea leg
Western India to Singapore is quick and frequently served, which makes modest and repeat consignments genuinely practical.
- Everything is documented
Send the specification and we will tell you in writing where our material sits against it, and where it does not.
- Assembly and performance rooms
Places of worship, auditoria and function rooms are hard volumes where a long tail defeats speech.
- The housing stock
HDB and condominium towers in reinforced concrete with hard floors. Mass is good, impact noise through the slab and live rooms are the complaints.
Architects working in Singapore usually need the build-up before the product. We will draw the section and mark what does the work. See how we support architects.
04 / Climate
Why the climate in Singapore changes the material, not the target
Singapore is warm and humid through most of the year, with a long wet season, and that narrows the sensible material list before acoustics is even discussed.
Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them.
The risk we design against here is mould, sagging fabric finishes and swelling in timber.
Designers get colour, pattern and CNC options with the absorption figure attached to each. See how we work with interior designers.
05 / Supply
Getting it to Singapore, with real dates
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Singapore, then a short road run to site |
| Dispatch | 4 to 7 working days |
| Freight | Sea into Singapore |
| Packing | Boxed, 64 sq ft per pack, 20 kg. Easy to carry up a stair, which matters on fit-out sites with no lift access. |
| Lead time | 4 to 7 working days. |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Sea freight direct into Singapore, then a short road run to site. Air freight for samples and urgent quantities.
The same minimums apply on export.
| Carpet tiles | 320 sq ft, about 30 sq m |
|---|---|
| Rugs | 500 sq ft, about 46 sq m |
A pack of tiles covers 64 sq ft and weighs 20 kg boxed, so the tile minimum is exactly five packs and about 100 kg.
06 / Before you buy
The things worth knowing before you place the order
-
The wrong product for the problem
Carpet fixes footfall and chair noise and takes the edge off a live room. It will not deliver a reverberation target on its own, because the ceiling is almost always the bigger surface.
-
A number chased without a measurement
If nobody has measured the room or set a target, the specification is a guess with a decimal point in it. We will ask for the target before we quote the quantity.
-
Local approvals that nobody actually holds
We hold no Singapore certification and we will not borrow one. The test data we publish is ours, and we will send the reports rather than describe them.
Singapore: questions we are actually asked
Is there a Singapore factory behind this product?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Singapore as the manufacturer rather than through a dealer. Made at our own plant in India and shipped straight into Singapore, one of the shortest and most frequently served runs we operate. You buy at factory prices with one consistent batch across the order.
What changes the specification on a Singapore job?
Western India to Singapore is quick and frequently served, which makes modest and repeat consignments genuinely practical. The structure blocks well. The problem is tile, glass and stone inside, plus impact passing down through slabs. Those two things move the build-up far more than the panel figure does.
Does Singapore weather shorten the life of this material?
Singapore is warm and humid through most of the year, with a long wet season. Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them. The failure we design against here is mould, sagging fabric finishes and swelling in timber.
How quickly can material reach a site in Singapore?
ships from: Palwal, Haryana, India, arrives at: Singapore, then a short road run to site, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
What should you not buy acoustic carpet and rugs for?
Carpet fixes footfall and chair noise and takes the edge off a live room. It will not deliver a reverberation target on its own, because the ceiling is almost always the bigger surface.
What is the minimum order and how is it packed?
The same minimums apply on export. Carpet tiles, 320 sq ft, about 30 sq m. Rugs, 500 sq ft, about 46 sq m. A pack of tiles covers 64 sq ft and weighs 20 kg boxed, so the tile minimum is exactly five packs and about 100 kg. Boxed, 64 sq ft per pack, 20 kg. Easy to carry up a stair, which matters on fit-out sites with no lift access.
Next step
Send a plan and a section, get a real build-up
One drawing gets you a proper answer. Build-up, quantities, a delivered date, and an honest note on anything we think is the wrong approach.