Manufactured in India, supplied in Singapore
Soundproof curtains in Singapore
We manufacture soundproof curtains at our own plant at Palwal in Haryana, India, and supply them into Singapore. Made at our own plant in India and shipped straight into Singapore, one of the shortest and most frequently served runs we operate.
- Build-up
- 800 GSM face, foam, 3 mm SoundBlanket MLV core, foam, 800 GSM face
- Total thickness
- 10 to 12 mm
- Weight
- 5.5 kg per sq m
- Reduction
- Up to 30 dB
- STC
- 30
- Lead time
- Made to size
- Minimum order
- 5 pieces
- ASTM E90
- Standard sizes, 8 x 4 ft and 5 x 4 ft
- Made at our own plant, Palwal, Haryana, India
This comes from our own plant, not a trading desk. We do not have an office in your city and we will not invent one. What we can give you is factory pricing, consistent material and a technical answer before you commit.
01 / What it is
The product, described honestly, for a Singapore brief
A layered curtain with a mass loaded vinyl core, used where an opening has to stay an opening. It is the answer for a doorway, a stage, a partition that must move, not a substitute for a wall.
Work reaching us from Singapore is mostly apartments and condominiums, offices, hotels, schools, hospitals, studios.
HDB and condominium towers in reinforced concrete with hard floors. Mass is good, impact noise through the slab and live rooms are the complaints.
- Full height with return Curtain taken floor to soffit with a side return and an overlap, because the gap is what leaks, not the fabric.
- Track with a seal Ceiling track plus a floor seal or drape, so the perimeter is closed when it is drawn.
- Double layer at a doorway Two curtains with an air gap where a single layer will not reach the target.
- What it will not do A curtain is only as good as its perimeter. Hung short, hung flat against a frame, or with a gap at the side, it will measure nothing like the figure on the sheet.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for soundproof curtains are on the main product page. This page covers what that means for a project in Singapore.
02 / The numbers
One specification sheet, the same in every market
The specification below is the same everywhere we supply, because a specification that changed by city would not be a specification. What changes is which grade and build-up is the right buy, and that is what the rest of this page is about.
- Standard5.5 kg per sq m. Openings, stages, temporary partitions
| Build-up | 800 GSM face, foam, 3 mm SoundBlanket MLV core, foam, 800 GSM face |
|---|---|
| Total thickness | 10 to 12 mm |
| Weight | 5.5 kg per sq m |
| Reduction | Up to 30 dB |
| STC | 30 |
| Test standard | ASTM E90 |
| Standard sizes | 8 x 4 ft and 5 x 4 ft |
If a consultant has set the target, we will quote against their figures rather than ours, and stay out of the scope they own. More on working with acoustic consultants.
03 / In this market
What the buildings in Singapore do to the specification
- Tropical humidity all year
PET felt does not absorb moisture, shed fibre or feed mould, which matters where mineral products sag within a couple of seasons.
- A very short sea leg
Western India to Singapore is quick and frequently served, which makes modest and repeat consignments genuinely practical.
- Concrete towers, live interiors
The structure blocks well. The problem is tile, glass and stone inside, plus impact passing down through slabs.
- Everything is documented
Send the specification and we will tell you in writing where our material sits against it, and where it does not.
- The housing stock
HDB and condominium towers in reinforced concrete with hard floors. Mass is good, impact noise through the slab and live rooms are the complaints.
- The studio and content scene
Studios go into industrial and commercial units where the neighbouring tenancy and the building plant set the floor.
For a Singapore practice, the useful thing is a detail you can put in a drawing set, not a brochure. See how we support architects.
04 / Conditions
The Singapore climate decides the material list
Singapore is warm and humid through most of the year, with a long wet season, and that narrows the sensible material list before acoustics is even discussed.
Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them.
The risk we design against here is mould, sagging fabric finishes and swelling in timber.
Designers get colour, pattern and CNC options with the absorption figure attached to each. See how we work with interior designers.
05 / Route to site
Getting it to Singapore, with real dates
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Singapore, then a short road run to site |
| Dispatch | 4 to 7 working days |
| Freight | Sea into Singapore |
| Packing | Rolled and bagged with track and fixings listed separately. |
| Lead time | Made to size. Confirmed at quote. |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Sea freight direct into Singapore, then a short road run to site. Air freight for samples and urgent quantities.
The same 5 piece minimum applies on export.
| Any size | 5 pieces |
|---|
Curtains are made to size, so the minimum is counted in pieces rather than area.
06 / Read this first
What we will tell you that a reseller will not
-
The wrong product for the problem
A curtain is only as good as its perimeter. Hung short, hung flat against a frame, or with a gap at the side, it will measure nothing like the figure on the sheet. We quote the detail, not just the fabric.
-
Coverage bought instead of a target
Lining every surface is a purchase, not a result. We would rather calculate the area against a reverberation target and sell you less of it.
-
Suppliers who imply a Singapore presence
Ask any supplier where the material is made and who carries the warranty. We make it at Palwal in Haryana and we say so on every page, including this one.
Singapore: questions we are actually asked
Is there a Singapore factory behind this product?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Singapore as the manufacturer rather than through a dealer. Made at our own plant in India and shipped straight into Singapore, one of the shortest and most frequently served runs we operate. You buy at factory prices with one consistent batch across the order.
What decides the specification for a Singapore project?
Western India to Singapore is quick and frequently served, which makes modest and repeat consignments genuinely practical. The structure blocks well. The problem is tile, glass and stone inside, plus impact passing down through slabs. Those two things move the build-up far more than the panel figure does.
Is this the right material for Singapore conditions?
Singapore is warm and humid through most of the year, with a long wet season. Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them. The failure we design against here is mould, sagging fabric finishes and swelling in timber.
When would material land on a Singapore site?
ships from: Palwal, Haryana, India, arrives at: Singapore, then a short road run to site, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
When are soundproof curtains the wrong purchase?
A curtain is only as good as its perimeter. Hung short, hung flat against a frame, or with a gap at the side, it will measure nothing like the figure on the sheet. We quote the detail, not just the fabric.
How is the order packed and what is the minimum?
The same 5 piece minimum applies on export. Any size, 5 pieces. Curtains are made to size, so the minimum is counted in pieces rather than area. Rolled and bagged with track and fixings listed separately.
Next step
Send the drawings, get a straight answer
A plan and a section is enough. We will come back with a build-up, a BOQ and a delivered date, and we will say so if what you are asking for will not work.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for soundproof curtains are on the main product page. This page covers what that means for a project in Singapore.