For projects in Sharjah
Venue and restaurant acoustics in Sharjah
Two different jobs that get quoted as one: keeping bass inside the building for the neighbours, and making the room comfortable enough that guests can talk. Solving one does nothing for the other. Hotel ballrooms, mosques and conference centres are tall hard volumes where a long tail defeats the speech system before anyone hears a word.
- Containment
- Low frequency through structure to flats above and beside. Mass, decoupling and a sealed envelope.
- Table level comfort
- Absorption at the ceiling so guests stop raising their voices at each other.
- Entrance and service
- Doors, lobbies and extract paths, which is where most of the leakage actually is.
- Quote
- From a plan and a section, within 48 hours
01 / Start here
What you are buying, and what it fixes in Sharjah
Two different jobs that get quoted as one: keeping bass inside the building for the neighbours, and making the room comfortable enough that guests can talk. Solving one does nothing for the other.
Hotel ballrooms, mosques and conference centres are tall hard volumes where a long tail defeats the speech system before anyone hears a word.
Work reaching us from Sharjah is mostly residential towers, fit-out contractors, factories and warehouses, schools, clinics, offices.
- Buying direct from the factory Most material here arrives through a trader. Buying from the plant removes a layer of margin, and it means the person answering your technical question made the product.
- Dense mid-rise living Tower and mid-rise blocks stack families above each other on blockwork and concrete slabs. Footfall, speech and TV noise between flats is the complaint we hear most.
- Industrial and warehouse work Plant rooms, generator halls, compressor bays and workshops need mass and isolation, not decorative absorption. We say so rather than selling you panels.
- Containment Low frequency through structure to flats above and beside. Mass, decoupling and a sealed envelope.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for venue soundproofing are on the main product page. This page covers what that means for a project in Sharjah.
Nightclub and venue soundproofing SoundBlanket mass loaded vinyl
02 / The build-up
What goes where, from the structure in
-
Layer 1
SoundBlanket mass loaded vinyl
A limp, high density sheet that adds mass to a partition, floor or duct without adding depth. In Sharjah, district cooling and large AHU plant run continuously. Duct attenuation, plant room lining and riser treatment do the work.
Wall, decoupled. Independent stud, membrane between the boards, cavity absorption, two boards. The membrane is one part of a system, never the whole answer.
-
Layer 2
Acoustic panels
The full absorber range rather than one product: plain PET felt, printed felt, grooved panels and fabric finishes, chosen by how the room is used and how it has to look. In Sharjah, hotel ballrooms, mosques and conference centres are tall hard volumes where a long tail defeats the speech system before anyone hears a word.
Mixed finish. Plain felt where it is out of eye line, printed or grooved where it is seen.
-
Layer 3
Wooden slat acoustic panels
Timber slats on an acoustic backing. In Sharjah, international school campuses are new, highly glazed and built to a tight programme. Sports halls, atria and lecture spaces are the rooms that need treating.
Feature wall only. Slats where they are seen, plain felt elsewhere, to hold the budget where it shows.
We would rather argue about the build-up at design stage than on site. See how we support architects.
03 / In this market
What the buildings in Sharjah do to the specification
- Buying direct from the factory
Most material here arrives through a trader. Buying from the plant removes a layer of margin, and it means the person answering your technical question made the product.
- Dense mid-rise living
Tower and mid-rise blocks stack families above each other on blockwork and concrete slabs. Footfall, speech and TV noise between flats is the complaint we hear most.
- Industrial and warehouse work
Plant rooms, generator halls, compressor bays and workshops need mass and isolation, not decorative absorption. We say so rather than selling you panels.
- Fit-out contractors serving the whole UAE
A lot of Sharjah businesses fit out sites across the Emirates. We quote full container loads and stage deliveries against the programme.
- Assembly and performance rooms
Hotel ballrooms, mosques and conference centres are tall hard volumes where a long tail defeats the speech system before anyone hears a word.
04 / Room by room
Where the money goes on a Sharjah project
-
Containment
Low frequency through structure to flats above and beside. Mass, decoupling and a sealed envelope. Most material here arrives through a trader. Buying from the plant removes a layer of margin, and it means the person answering your technical question made the product.
- SoundBlanket mass loaded vinyl, 2100 kg per cubic metre
- Soundproofing materials, 1800 x 900 x 20 mm, 100 kg per cubic metre, NRC 0.85
- Acoustic panels, Cut pattern in PET felt, adds visual rhythm without changing the absorber
-
Table level comfort
Absorption at the ceiling so guests stop raising their voices at each other. Tower and mid-rise blocks stack families above each other on blockwork and concrete slabs. Footfall, speech and TV noise between flats is the complaint we hear most.
- SoundBlanket mass loaded vinyl, STC 30, 5.25 kg per sq m
- Soundproofing materials, Mass, then decoupling, then cavity absorption, then sealing
- Acoustic panels, ASTM C423
-
Entrance and service
Doors, lobbies and extract paths, which is where most of the leakage actually is. Plant rooms, generator halls, compressor bays and workshops need mass and isolation, not decorative absorption. We say so rather than selling you panels.
- SoundBlanket mass loaded vinyl, STC 34, 8.4 kg per sq m
- Soundproofing materials, ASTM E90 for the barrier, ASTM C423 for the absorber
- Acoustic panels, 9 to 24 mm, 1220 x 2440 mm standard, up to 2440 x 4270 mm, 1200 to 3600 GSM
If the visual is fixed and the room still has to perform, that is a solvable problem and a conversation worth having early. See how we work with interior designers.
04 / Conditions
The Sharjah climate decides the material list
Sharjah is hot and dry for most of the year, with dust and high daytime surface temperatures, and that narrows the material list before acoustics is discussed.
Dust is the enemy of open-cell products. PET felt does not shed, does not hold dust in the way fabric-wrapped glass wool does, and wipes down. Timber needs a stable indoor RH or it moves.
The failure we design against here is dust ingress and thermal movement in long runs.
On a Sharjah job with a consultant involved, our part is material that matches the submitted data. See working with acoustic consultants.
06 / Straight talk
Where this kind of project usually fails
-
Panels on the wall as a neighbour noise solution
It sounds like a small detail until the room is finished and the complaint arrives.
-
A lobby with both doors able to open at once
Soundproofing fails at the gaps, not the materials. One unsealed service penetration can undo a correctly built wall.
-
Extract ducting that bypasses every wall you built
Noise with a source is fixed at the source. Treating the receiving room is the expensive way to get a small result.
-
Treating it as a generic Sharjah job
Most material here arrives through a trader. Buying from the plant removes a layer of margin, and it means the person answering your technical question made the product.
05 / Getting it there
What the route into Sharjah actually looks like
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Port Khalid or Jebel Ali, then road to site |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Port Khalid |
| Support | Drawings, build-ups, BOQ and material that arrives complete |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order.
Sea freight into Port Khalid or Jebel Ali, then road to site. The transit from western India is short enough that sea suits most programmes. Air freight for samples and urgent quantities.
Questions from Sharjah projects
What makes venue and restaurant acoustics different in Sharjah?
Hotel ballrooms, mosques and conference centres are tall hard volumes where a long tail defeats the speech system before anyone hears a word. Most material here arrives through a trader. Buying from the plant removes a layer of margin, and it means the person answering your technical question made the product.
Where should the budget go first on a Sharjah project?
Containment. Low frequency through structure to flats above and beside. Mass, decoupling and a sealed envelope. Table level comfort. Absorption at the ceiling so guests stop raising their voices at each other.
Do you have an office or installation team in Sharjah?
No. We manufacture in India and supply into Sharjah. We give you drawings, build-ups, a BOQ and material that arrives complete, and we will tell you plainly when a job needs a local contractor we cannot be.
How does material get to a Sharjah site?
ships from: Palwal, Haryana, India, arrives at: Port Khalid or Jebel Ali, then road to site, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order.
What goes wrong most often on this kind of project?
Panels on the wall as a neighbour noise solution. A lobby with both doors able to open at once.
What do you need from us to quote?
A plan, a section through the critical partition or ceiling, and what the room is for. From that we can give a build-up and a BOQ rather than a price per square foot.
Next step
Drawings in, BOQ and a delivered date out
One drawing gets you a proper answer. Build-up, quantities, a delivered date, and an honest note on anything we think is the wrong approach.