For projects in Sharjah
Office acoustics and soundproofing in Sharjah
Three separate problems get called one problem: speech carrying across an open floor, meeting rooms that leak, and hard rooms that ring. Each has a different answer and mixing them up is how budgets get wasted. District cooling and large AHU plant run continuously. Duct attenuation, plant room lining and riser treatment do the work.
- Open plan
- Distraction distance, not reverberation time. Ceiling absorption plus screens at the desk.
- Meeting rooms
- Privacy between rooms. That is partition and door work, not panels.
- Cabins and calls
- Short RT so a call sounds clean. A small amount of well placed absorber.
- Quote
- From a plan and a section, within 48 hours
01 / What it is
The product, described honestly, for a Sharjah brief
Three separate problems get called one problem: speech carrying across an open floor, meeting rooms that leak, and hard rooms that ring. Each has a different answer and mixing them up is how budgets get wasted.
District cooling and large AHU plant run continuously. Duct attenuation, plant room lining and riser treatment do the work.
Work reaching us from Sharjah is mostly residential towers, fit-out contractors, factories and warehouses, schools, clinics, offices.
- Buying direct from the factory Most material here arrives through a trader. Buying from the plant removes a layer of margin, and it means the person answering your technical question made the product.
- Dense mid-rise living Tower and mid-rise blocks stack families above each other on blockwork and concrete slabs. Footfall, speech and TV noise between flats is the complaint we hear most.
- Industrial and warehouse work Plant rooms, generator halls, compressor bays and workshops need mass and isolation, not decorative absorption. We say so rather than selling you panels.
- Open plan Distraction distance, not reverberation time. Ceiling absorption plus screens at the desk.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for office acoustics are on the main product page. This page covers what that means for a project in Sharjah.
Office and conference room acoustics Acoustic office screens
02 / The build-up
The build-up, layer by layer
-
Layer 1
Ceiling baffles and clouds
PET felt suspended from the soffit, vertically as baffles or horizontally as clouds. In Sharjah, district cooling and large AHU plant run continuously. Duct attenuation, plant room lining and riser treatment do the work.
Horizontal clouds. Flat rafts over the occupied zone, which also reflect early speech energy back down where it helps.
-
Layer 2
Acoustic carpet and rugs
A tile carpet with a dense polyester face on a felt backing. In Sharjah, hotel ballrooms, mosques and conference centres are tall hard volumes where a long tail defeats the speech system before anyone hears a word.
Over a resilient underlay. Where impact noise to the floor below is the actual complaint, the underlay does that work, not the carpet.
-
Layer 3
SoundBlanket mass loaded vinyl
A limp, high density sheet that adds mass to a partition, floor or duct without adding depth. In Sharjah, international school campuses are new, highly glazed and built to a tight programme. Sports halls, atria and lecture spaces are the rooms that need treating.
Floor, floating. Membrane under a resilient layer and a floating deck, so impact energy is broken before it reaches the slab.
We would rather argue about the build-up at design stage than on site. See how we support architects.
03 / In this market
What decides the build-up in Sharjah
- Buying direct from the factory
Most material here arrives through a trader. Buying from the plant removes a layer of margin, and it means the person answering your technical question made the product.
- Dense mid-rise living
Tower and mid-rise blocks stack families above each other on blockwork and concrete slabs. Footfall, speech and TV noise between flats is the complaint we hear most.
- Industrial and warehouse work
Plant rooms, generator halls, compressor bays and workshops need mass and isolation, not decorative absorption. We say so rather than selling you panels.
- Fit-out contractors serving the whole UAE
A lot of Sharjah businesses fit out sites across the Emirates. We quote full container loads and stage deliveries against the programme.
- Plant and HVAC
District cooling and large AHU plant run continuously. Duct attenuation, plant room lining and riser treatment do the work.
04 / Room by room
What each space in a Sharjah project needs
-
Open plan
Distraction distance, not reverberation time. Ceiling absorption plus screens at the desk. Most material here arrives through a trader. Buying from the plant removes a layer of margin, and it means the person answering your technical question made the product.
- Ceiling baffles and clouds, 100% PET non-woven, the panel family
- PET felt acoustic panels, 9, 12, 18 and 24 mm standard, tolerance plus or minus 5 percent
- Acoustic panels, Cut pattern in PET felt, adds visual rhythm without changing the absorber
-
Meeting rooms
Privacy between rooms. That is partition and door work, not panels. Tower and mid-rise blocks stack families above each other on blockwork and concrete slabs. Footfall, speech and TV noise between flats is the complaint we hear most.
- Ceiling baffles and clouds, 9 to 24 mm
- PET felt acoustic panels, 4 to 24 mm
- Acoustic panels, ASTM C423
-
Cabins and calls
Short RT so a call sounds clean. A small amount of well placed absorber. Plant rooms, generator halls, compressor bays and workshops need mass and isolation, not decorative absorption. We say so rather than selling you panels.
- Ceiling baffles and clouds, Made to the drawing, standard and custom
- PET felt acoustic panels, 1220 x 2440 mm standard, 4 x 8 ft
- Acoustic panels, 9 to 24 mm, 1220 x 2440 mm standard, up to 2440 x 4270 mm, 1200 to 3600 GSM
Designers get colour, pattern and CNC options with the absorption figure attached to each. See how we work with interior designers.
04 / Conditions
The Sharjah climate decides the material list
Sharjah is hot and dry for most of the year, with dust and high daytime surface temperatures, and that narrows the material list before acoustics is discussed.
Dust is the enemy of open-cell products. PET felt does not shed, does not hold dust in the way fabric-wrapped glass wool does, and wipes down. Timber needs a stable indoor RH or it moves.
The failure we design against here is dust ingress and thermal movement in long runs.
If a consultant has set the target, we will quote against their figures rather than ours, and stay out of the scope they own. More on working with acoustic consultants.
06 / Read this first
What we watch go wrong on jobs like this
-
Lining every wall while leaving the ceiling bare
Square metre for square metre the ceiling is the cheapest result in the room. Skipping it and buying wall panels instead is the most common way to overspend.
-
Treating a privacy problem with absorption
Nobody has ever achieved speech privacy with a panel. Privacy needs mass, a sealed head detail and a door that actually closes.
-
Glass cabins specified without a door and head detail
Soundproofing fails at the gaps, not the materials. One unsealed service penetration can undo a correctly built wall.
-
Treating it as a generic Sharjah job
Most material here arrives through a trader. Buying from the plant removes a layer of margin, and it means the person answering your technical question made the product.
05 / Route to site
Supply into Sharjah, start to site
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Port Khalid or Jebel Ali, then road to site |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Port Khalid |
| Support | Drawings, build-ups, BOQ and material that arrives complete |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order.
Sea freight into Port Khalid or Jebel Ali, then road to site. The transit from western India is short enough that sea suits most programmes. Air freight for samples and urgent quantities.
Questions from Sharjah projects
What makes office acoustics and soundproofing different in Sharjah?
District cooling and large AHU plant run continuously. Duct attenuation, plant room lining and riser treatment do the work. Most material here arrives through a trader. Buying from the plant removes a layer of margin, and it means the person answering your technical question made the product.
Where should the budget go first on a Sharjah project?
Open plan. Distraction distance, not reverberation time. Ceiling absorption plus screens at the desk. Meeting rooms. Privacy between rooms. That is partition and door work, not panels.
Do you have an office or installation team in Sharjah?
No. We manufacture in India and supply into Sharjah. We give you drawings, build-ups, a BOQ and material that arrives complete, and we will tell you plainly when a job needs a local contractor we cannot be.
How does material get to a Sharjah site?
ships from: Palwal, Haryana, India, arrives at: Port Khalid or Jebel Ali, then road to site, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order.
What goes wrong most often on this kind of project?
Lining every wall while leaving the ceiling bare. Treating a privacy problem with absorption.
What do you need from us to quote?
A plan, a section through the critical partition or ceiling, and what the room is for. From that we can give a build-up and a BOQ rather than a price per square foot.
Next step
Drawings in, BOQ and a delivered date out
A plan and a section is enough. We will come back with a build-up, a BOQ and a delivered date, and we will say so if what you are asking for will not work.