Manufactured in India, supplied in Sharjah
Acoustic foam and BassBloc in Sharjah
We manufacture acoustic foam and BassBloc at our own plant at Palwal in Haryana, India, and supply them into Sharjah. Made at our own plant in India and shipped into Port Khalid or Jebel Ali, a short sea run from western India, with container pricing that suits the way Sharjah buys.
- BassBloc size
- 1800 x 900 mm
- BassBloc thickness
- 20 mm
- BassBloc density
- 100 kg per cubic metre
- Effective range
- 100 to 500 Hz
- BassBloc NRC
- 0.85
- Lead time
- 4 to 7 working days
- Minimum order
- From 200 sq ft
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
- Test reports sent on request, not just quoted
Manufacturer, not reseller. We hold no local approvals and will not imply we do. You get the price the factory quotes, material that matches across a large order, and advice that sometimes talks you out of a purchase.
01 / The material
What this is, and what it changes in a Sharjah room
Open cell foam shapes for high frequency control, and BassBloc, a high density absorber built for the low mid range where ordinary foam does nothing.
Work reaching us from Sharjah is mostly residential towers, fit-out contractors, factories and warehouses, schools, clinics, offices.
Towers and villas are concrete and block with stone or porcelain floors throughout. Mass is not the problem, impact noise and live rooms are.
- Corner loading Low frequency energy collects in corners, so absorber in the corners does more than the same area spread across a wall.
- First reflection points Mirror trick placement on side walls and ceiling, which is a handful of panels rather than a lined room.
- Behind a fabric frame Where the room has to look finished, absorber inside a frame rather than foam on show.
- What it will not do Thin foam on a wall is the most over-sold product in this industry. It controls flutter and nothing below it.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for acoustic foam and bass traps are on the main product page. This page covers what that means for a project in Sharjah.
02 / Specification
The numbers, and they do not move by city
Nothing below changes by location. The decisions that do change are grade, thickness and how the material is mounted, and those are covered further down.
- Foam wedge and pyramidLow density. Flutter and high frequency only
- BassBloc100 kg per cubic metre. Low mid absorption, control rooms, live rooms
| BassBloc size | 1800 x 900 mm |
|---|---|
| BassBloc thickness | 20 mm |
| BassBloc density | 100 kg per cubic metre |
| Effective range | 100 to 500 Hz |
| BassBloc NRC | 0.85 |
If a consultant has set the target, we will quote against their figures rather than ours, and stay out of the scope they own. More on working with acoustic consultants.
03 / In this market
What decides the build-up in Sharjah
- Buying direct from the factory
Most material here arrives through a trader. Buying from the plant removes a layer of margin, and it means the person answering your technical question made the product.
- Dense mid-rise living
Tower and mid-rise blocks stack families above each other on blockwork and concrete slabs. Footfall, speech and TV noise between flats is the complaint we hear most.
- Industrial and warehouse work
Plant rooms, generator halls, compressor bays and workshops need mass and isolation, not decorative absorption. We say so rather than selling you panels.
- Fit-out contractors serving the whole UAE
A lot of Sharjah businesses fit out sites across the Emirates. We quote full container loads and stage deliveries against the programme.
- The housing stock
Towers and villas are concrete and block with stone or porcelain floors throughout. Mass is not the problem, impact noise and live rooms are.
- The studio and content scene
Production rooms are fitted inside existing office and warehouse shells. Plant noise and neighbouring tenancies set the achievable noise floor.
We would rather argue about the build-up at design stage than on site. See how we support architects.
04 / Conditions
Durability in Sharjah, before acoustics is discussed
Sharjah is hot and dry for most of the year, with dust and high daytime surface temperatures, and that narrows the sensible material list before acoustics is even discussed.
Dust is the enemy of open-cell products. PET felt does not shed, does not hold dust in the way fabric-wrapped glass wool does, and wipes down. Timber needs a stable indoor RH or it moves.
The risk we design against here is dust ingress and thermal movement in long runs.
Interior designers tend to arrive with the look already decided. We will tell you which finish gets there without losing the acoustics. See how we work with interior designers.
05 / Getting it there
Supply into Sharjah, start to site
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Port Khalid or Jebel Ali, then road to site |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Port Khalid |
| Packing | Compressed and boxed for foam, palletised flat for BassBloc. |
| Lead time | 4 to 7 working days. |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order.
Sea freight into Port Khalid or Jebel Ali, then road to site. The transit from western India is short enough that sea suits most programmes. Air freight for samples and urgent quantities.
The same minimums apply on export.
| Acoustic foam | 200 sq ft, about 19 sq m |
|---|---|
| BassBloc | 300 sq ft, about 28 sq m |
| Bass traps | 10 pieces |
A BassBloc panel is 1800 x 900 mm, which is 1.62 sq m or about 17.4 sq ft, so the BassBloc minimum is roughly 17 panels.
06 / Worth knowing
Where this goes wrong, said plainly
-
The wrong product for the problem
Thin foam on a wall is the most over-sold product in this industry. It controls flutter and nothing below it. If the complaint is boom, bass from a neighbour, or a room that sounds uneven at low frequency, foam is the wrong purchase and we will say so.
-
Square footage quoted before the room is understood
Anyone can price a wall. Working out how much material the room actually needs usually reduces the order, which is why not everyone does it.
-
Local approvals that nobody actually holds
We hold no Sharjah certification and we will not borrow one. The test data we publish is ours, and we will send the reports rather than describe them.
07 / In projects
How it looks once it is installed
Sharjah: questions we are actually asked
Is there a Sharjah factory behind this product?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Sharjah as the manufacturer rather than through a dealer. Made at our own plant in India and shipped into Port Khalid or Jebel Ali, a short sea run from western India, with container pricing that suits the way Sharjah buys. You buy at factory prices with one consistent batch across the order.
What changes the specification on a Sharjah job?
Most material here arrives through a trader. Buying from the plant removes a layer of margin, and it means the person answering your technical question made the product. Tower and mid-rise blocks stack families above each other on blockwork and concrete slabs. Footfall, speech and TV noise between flats is the complaint we hear most. Those two things move the build-up far more than the panel figure does.
Will this material last in the Sharjah climate?
Sharjah is hot and dry for most of the year, with dust and high daytime surface temperatures. Dust is the enemy of open-cell products. PET felt does not shed, does not hold dust in the way fabric-wrapped glass wool does, and wipes down. Timber needs a stable indoor RH or it moves. The failure we design against here is dust ingress and thermal movement in long runs.
When would material land on a Sharjah site?
ships from: Palwal, Haryana, India, arrives at: Port Khalid or Jebel Ali, then road to site, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order.
When are acoustic foam and BassBloc the wrong purchase?
Thin foam on a wall is the most over-sold product in this industry. It controls flutter and nothing below it. If the complaint is boom, bass from a neighbour, or a room that sounds uneven at low frequency, foam is the wrong purchase and we will say so.
How is the order packed and what is the minimum?
The same minimums apply on export. Acoustic foam, 200 sq ft, about 19 sq m. BassBloc, 300 sq ft, about 28 sq m. Bass traps, 10 pieces. A BassBloc panel is 1800 x 900 mm, which is 1.62 sq m or about 17.4 sq ft, so the BassBloc minimum is roughly 17 panels. Compressed and boxed for foam, palletised flat for BassBloc.
Next step
Send a plan and a section, get a real build-up
We quote from drawings, not from a square foot rate. Send a plan and the section through the critical wall or ceiling and you will get something you can actually build from.