Manufactured in India, supplied in Seoul
Wood wool acoustic panels in Seoul
We manufacture wood wool acoustic panels at our own plant at Palwal in Haryana, India, and supply them into Seoul. Made at our own plant in India and shipped into Incheon, close to the city, so the road leg after the port is short.
- Panel size
- 1200 x 600 mm
- Thickness
- 20 mm
- Density
- 400 kg per cubic metre
- NRC
- 0.30
- Test standards
- ASTM C-423 and EN ISO 354
- Lead time
- 4 to 7 working days for standard sizes
- Minimum order
- 500 sq ft, about 46 sq m
- ASTM C-423 and EN ISO 354
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
We are the manufacturer. There is no local office and we do not claim approvals we do not hold. What you get is factory pricing, one consistent batch across the order, and a straight answer on what the material will and will not do.
01 / The material
What this is, and what it changes in a Seoul room
Wood fibre bound into a rigid board with an open texture. Robust, paintable and used where the surface takes knocks, which is why it ends up in schools, sports halls and plant rooms.
Work reaching us from Seoul is mostly apartment towers, offices, studios and content rooms, cafes and dining, clinics, schools.
Reinforced concrete apartment towers with underfloor heating and hard floors. Impact noise between floors is the single biggest residential complaint.
- Direct fix Mechanically fixed to the soffit or wall. Durable and simple.
- On a cavity Mounted on battens with an air gap, which is where the low mid performance comes from.
- With a porous backing Board over mineral backing where the room needs more than the board alone gives.
- What it will not do At 20 mm it is a mid and high frequency absorber, not a bass solution, and painting it heavily will close the surface and reduce what it does. If a room needs low frequency control, depth or a cavity has to come from somewhere.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for wood wool panels are on the main product page. This page covers what that means for a project in Seoul.
02 / Data sheet
Published specification, identical wherever we ship it
Nothing below changes by location. The decisions that do change are grade, thickness and how the material is mounted, and those are covered further down.
- Natural20 mm. Plant rooms, back of house, industrial
- Painted20 mm. Classrooms, halls, visible ceilings
| Panel size | 1200 x 600 mm |
|---|---|
| Thickness | 20 mm |
| Density | 400 kg per cubic metre |
| NRC | 0.30 |
| Test standards | ASTM C-423 and EN ISO 354 |
| Surface burning | Class A to ASTM E84 |
Where a consultant is already engaged on a Seoul project, we supply to their specification and send the test reports rather than describing them. More on working with acoustic consultants.
03 / On the ground
What decides the build-up in Seoul
- It is the floor, not the wall
Impact noise from above dominates complaints in this city. The fix goes under the finish before the finish goes down, not on the ceiling afterwards.
- Content rooms everywhere
Studios, streaming rooms and practice spaces inside residential and commercial towers. Isolation from the building is what makes them usable.
- Dense, vertical, mixed use
Cafes and venues sit underneath homes in the same structure, so containment decides trading hours.
- Incheon is close
A short road leg after the port keeps landed cost and dates predictable.
- Assembly and performance rooms
Church buildings, halls and auditoria are large hard volumes carrying amplified speech and music.
- School and campus buildings
School and academy buildings are hard surfaced with long corridors and very intensive use.
Architects working in Seoul usually need the build-up before the product. We will draw the section and mark what does the work. See how we support architects.
04 / Climate
The Seoul climate decides the material list
Seoul is hot summers, mild winters and a distinct wet season, and that narrows the sensible material list before acoustics is even discussed.
PET felt handles the wet months without absorbing moisture or feeding mould. Timber and wood wool want a ventilated cavity and a stable indoor RH.
The risk we design against here is wet-season humidity behind linings.
Interior designers tend to arrive with the look already decided. We will tell you which finish gets there without losing the acoustics. See how we work with interior designers.
05 / Getting it there
What the route into Seoul actually looks like
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Incheon, then a short road run into Seoul |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Incheon |
| Packing | Palletised flat, edge protected. Boards are rigid but the edges chip, so they travel protected. |
| Lead time | 4 to 7 working days for standard sizes. |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Sea freight into Incheon, then a short road run into Seoul. Air freight for samples and urgent quantities.
The same 500 sq ft minimum applies on export.
| Any finish | 500 sq ft, about 46 sq m |
|---|
A panel is 1200 x 600 mm, which is 0.72 sq m or about 7.75 sq ft, so the minimum is roughly 65 panels.
06 / Before you buy
Where this goes wrong, said plainly
-
The wrong product for the problem
At 20 mm it is a mid and high frequency absorber, not a bass solution, and painting it heavily will close the surface and reduce what it does. If a room needs low frequency control, depth or a cavity has to come from somewhere.
-
Coverage bought instead of a target
Lining every surface is a purchase, not a result. We would rather calculate the area against a reverberation target and sell you less of it.
-
Suppliers who imply a Seoul presence
Ask any supplier where the material is made and who carries the warranty. We make it at Palwal in Haryana and we say so on every page, including this one.
Seoul: questions we are actually asked
Do you manufacture wood wool acoustic panels in Seoul?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Seoul as the manufacturer rather than through a dealer. Made at our own plant in India and shipped into Incheon, close to the city, so the road leg after the port is short. You buy at factory prices with one consistent batch across the order.
What decides the specification for a Seoul project?
Impact noise from above dominates complaints in this city. The fix goes under the finish before the finish goes down, not on the ceiling afterwards. Studios, streaming rooms and practice spaces inside residential and commercial towers. Isolation from the building is what makes them usable. Those two things move the build-up far more than the panel figure does.
Will this material last in the Seoul climate?
Seoul is hot summers, mild winters and a distinct wet season. PET felt handles the wet months without absorbing moisture or feeding mould. Timber and wood wool want a ventilated cavity and a stable indoor RH. The failure we design against here is wet-season humidity behind linings.
How does an order actually travel to Seoul?
ships from: Palwal, Haryana, India, arrives at: Incheon, then a short road run into Seoul, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
What should you not buy wood wool acoustic panels for?
At 20 mm it is a mid and high frequency absorber, not a bass solution, and painting it heavily will close the surface and reduce what it does. If a room needs low frequency control, depth or a cavity has to come from somewhere.
Is there a minimum order, and how does it arrive?
The same 500 sq ft minimum applies on export. Any finish, 500 sq ft, about 46 sq m. A panel is 1200 x 600 mm, which is 0.72 sq m or about 7.75 sq ft, so the minimum is roughly 65 panels. Palletised flat, edge protected. Boards are rigid but the edges chip, so they travel protected.
Next step
Tell us the room, we will tell you the build-up
A plan and a section is enough. We will come back with a build-up, a BOQ and a delivered date, and we will say so if what you are asking for will not work.