Manufactured in India, supplied in Seoul
Acoustic panels in Seoul
We manufacture acoustic panels at our own plant at Palwal in Haryana, India, and supply them into Seoul. Made at our own plant in India and shipped into Incheon, close to the city, so the road leg after the port is short.
- Plain PET felt
- 9 to 24 mm, 1220 x 2440 mm standard, up to 2440 x 4270 mm, 1200 to 3600 GSM
- Printed felt
- 1800 x 900 mm, image printed into the felt rather than onto a facing
- Grooved panels
- Cut pattern in PET felt, adds visual rhythm without changing the absorber
- Test standard
- ASTM C423
- Lead time
- 4 to 7 working days standard
- Minimum order
- From 10 panels
- ASTM C423
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
This comes from our own plant, not a trading desk. We do not have an office in your city and we will not invent one. What we can give you is factory pricing, consistent material and a technical answer before you commit.
01 / What it is
The product, described honestly, for a Seoul brief
The full absorber range rather than one product: plain PET felt, printed felt, grooved panels and fabric finishes, chosen by how the room is used and how it has to look.
Work reaching us from Seoul is mostly apartment towers, offices, studios and content rooms, cafes and dining, clinics, schools.
Reinforced concrete apartment towers with underfloor heating and hard floors. Impact noise between floors is the single biggest residential complaint.
- Wall array Panels placed at first reflection points rather than spread evenly. Fewer panels, better result.
- Ceiling first In most rooms the ceiling is the largest untreated surface and the cheapest square metre of result.
- Mixed finish Plain felt where it is out of eye line, printed or grooved where it is seen.
- What it will not do Coverage is not the target, reverberation time is. Lining every surface wastes money and can leave a room sounding dead and unpleasant.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for our acoustic panel range are on the main product page. This page covers what that means for a project in Seoul.
PET felt acoustic panels Printed acoustic felt panels Grooved PET panels
02 / Specification sheet
The numbers, and they do not move by city
Nothing below changes by location. The decisions that do change are grade, thickness and how the material is mounted, and those are covered further down.
- EchoCore 151500 GSM. General commercial
- EchoPro 181800 GSM. Rooms with a written RT target
- EchoMax 222200 GSM. High occupancy and high level spaces
| Plain PET felt | 9 to 24 mm, 1220 x 2440 mm standard, up to 2440 x 4270 mm, 1200 to 3600 GSM |
|---|---|
| Printed felt | 1800 x 900 mm, image printed into the felt rather than onto a facing |
| Grooved panels | Cut pattern in PET felt, adds visual rhythm without changing the absorber |
| Test standard | ASTM C423 |
On a Seoul job with a consultant involved, our part is material that matches the submitted data. See working with acoustic consultants.
03 / In this market
What we see driving Seoul briefs
- It is the floor, not the wall
Impact noise from above dominates complaints in this city. The fix goes under the finish before the finish goes down, not on the ceiling afterwards.
- Content rooms everywhere
Studios, streaming rooms and practice spaces inside residential and commercial towers. Isolation from the building is what makes them usable.
- Dense, vertical, mixed use
Cafes and venues sit underneath homes in the same structure, so containment decides trading hours.
- Incheon is close
A short road leg after the port keeps landed cost and dates predictable.
- School and campus buildings
School and academy buildings are hard surfaced with long corridors and very intensive use.
- The studio and content scene
A very large music and content industry with rooms built inside commercial buildings to measured targets.
For a Seoul practice, the useful thing is a detail you can put in a drawing set, not a brochure. See how we support architects.
04 / Conditions
The Seoul climate decides the material list
Seoul is hot summers, mild winters and a distinct wet season, and that narrows the sensible material list before acoustics is even discussed.
PET felt handles the wet months without absorbing moisture or feeding mould. Timber and wood wool want a ventilated cavity and a stable indoor RH.
The risk we design against here is wet-season humidity behind linings.
For a Seoul interior where the finish leads, we will say plainly what each option costs you acoustically. See how we work with interior designers.
05 / Supply
Getting it to Seoul, with real dates
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Incheon, then a short road run into Seoul |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Incheon |
| Packing | Palletised flat and film wrapped. Printed panels interleaved and corner protected. |
| Lead time | 4 to 7 working days standard. Printed and grooved take longer. |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Sea freight into Incheon, then a short road run into Seoul. Air freight for samples and urgent quantities.
200 panels for a trial order, in any mix of thickness, GSM and colour. Beyond a trial we would rather quote a container load.
| Trial order | 200 panels, 6,400 sq ft, mixed thickness, GSM and colour |
|---|---|
| Recommended | Full container |
A panel is 1220 x 2440 mm, which is 32 sq ft.
06 / Read this first
Where this goes wrong, said plainly
-
The wrong product for the problem
Coverage is not the target, reverberation time is. Lining every surface wastes money and can leave a room sounding dead and unpleasant. We would rather calculate the area than sell the wall.
-
Square footage quoted before the room is understood
Anyone can price a wall. Working out how much material the room actually needs usually reduces the order, which is why not everyone does it.
-
Local approvals that nobody actually holds
We hold no Seoul certification and we will not borrow one. The test data we publish is ours, and we will send the reports rather than describe them.
07 / In projects
The product on finished jobs
Seoul: questions we are actually asked
Are these acoustic panels made in Seoul?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Seoul as the manufacturer rather than through a dealer. Made at our own plant in India and shipped into Incheon, close to the city, so the road leg after the port is short. You buy at factory prices with one consistent batch across the order.
What decides the specification for a Seoul project?
Impact noise from above dominates complaints in this city. The fix goes under the finish before the finish goes down, not on the ceiling afterwards. Studios, streaming rooms and practice spaces inside residential and commercial towers. Isolation from the building is what makes them usable. Those two things move the build-up far more than the panel figure does.
Is this the right material for Seoul conditions?
Seoul is hot summers, mild winters and a distinct wet season. PET felt handles the wet months without absorbing moisture or feeding mould. Timber and wood wool want a ventilated cavity and a stable indoor RH. The failure we design against here is wet-season humidity behind linings.
How quickly can material reach a site in Seoul?
ships from: Palwal, Haryana, India, arrives at: Incheon, then a short road run into Seoul, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
What will acoustic panels not do?
Coverage is not the target, reverberation time is. Lining every surface wastes money and can leave a room sounding dead and unpleasant. We would rather calculate the area than sell the wall.
What quantity do we have to order, and in what packaging?
200 panels for a trial order, in any mix of thickness, GSM and colour. Beyond a trial we would rather quote a container load. Trial order, 200 panels, 6,400 sq ft, mixed thickness, GSM and colour. Recommended, Full container. A panel is 1220 x 2440 mm, which is 32 sq ft. Palletised flat and film wrapped. Printed panels interleaved and corner protected.
Next step
Send the drawings, get a straight answer
A plan and a section is enough. We will come back with a build-up, a BOQ and a delivered date, and we will say so if what you are asking for will not work.