For projects in Romania
Hospital and healthcare acoustics in Romania
Two duties at once: privacy where confidential conversations happen, and a lower noise floor where people are trying to rest. Hygiene and cleanability rule out a lot of products before acoustics is even discussed. District heating in older stock and split units throughout, with condensers on facades close to bedrooms.
- Consulting room privacy
- Speech privacy between rooms, which is partition, door and ceiling void work.
- Ward noise floor
- Alarms, trolleys and staff conversation in hard corridors. Absorption at the ceiling.
- Cleanability
- Non shedding, non absorbent surfaces that survive a cleaning regime.
- Quote
- From a plan and a section, within 48 hours
01 / The product
What this is, and what it changes in a Romania room
Two duties at once: privacy where confidential conversations happen, and a lower noise floor where people are trying to rest. Hygiene and cleanability rule out a lot of products before acoustics is even discussed.
District heating in older stock and split units throughout, with condensers on facades close to bedrooms.
Work reaching us from Romania is mostly automotive and manufacturing plants, offices and service centres, panel block housing, schools, hospitals.
- Constanța is a major port Direct sailings and good onward road connections make this one of the easier routes into central Europe.
- Manufacturing plant noise Presses, robots and compressors are low frequency and structure-borne. Enclosure at the source rather than absorption on a far wall.
- Panel block housing Prefabricated concrete passes speech and footfall between flats through thin connected elements. Mass is the only reliable answer.
- Consulting room privacy Speech privacy between rooms, which is partition, door and ceiling void work.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for healthcare acoustics are on the main product page. This page covers what that means for a project in Romania.
02 / The build-up
What goes where, from the structure in
-
Layer 1
PET felt acoustic panels
A rigid non-woven panel pressed from 100% polyester fibre, a large part of it recycled. In Romania, district heating in older stock and split units throughout, with condensers on facades close to bedrooms.
Over a porous backing. Panel over mineral or PET backing where the room needs genuine low mid control.
-
Layer 2
SoundBlanket mass loaded vinyl
A limp, high density sheet that adds mass to a partition, floor or duct without adding depth. In Romania, church buildings and civic halls are tall hard volumes with very long reverberation.
Floor, floating. Membrane under a resilient layer and a floating deck, so impact energy is broken before it reaches the slab.
-
Layer 3
Acoustic panels
The full absorber range rather than one product: plain PET felt, printed felt, grooved panels and fabric finishes, chosen by how the room is used and how it has to look. In Romania, school buildings are hard surfaced with long corridors and gymnasiums doubling as assembly halls.
Ceiling first. In most rooms the ceiling is the largest untreated surface and the cheapest square metre of result.
If you are specifying for a Romania project, we can give you a section, a BOQ and the honest limits of each layer. See how we support architects.
03 / In this market
What decides the build-up in Romania
- Constanța is a major port
Direct sailings and good onward road connections make this one of the easier routes into central Europe.
- Manufacturing plant noise
Presses, robots and compressors are low frequency and structure-borne. Enclosure at the source rather than absorption on a far wall.
- Panel block housing
Prefabricated concrete passes speech and footfall between flats through thin connected elements. Mass is the only reliable answer.
- Service centre floors
Large rooms full of people on calls, where privacy rather than echo is the real problem.
- Plant and HVAC
District heating in older stock and split units throughout, with condensers on facades close to bedrooms.
04 / Room by room
Where the money goes on a Romania project
-
Consulting room privacy
Speech privacy between rooms, which is partition, door and ceiling void work. Direct sailings and good onward road connections make this one of the easier routes into central Europe.
- Ceiling baffles and clouds, 100% PET non-woven, the panel family
- Acoustic carpet and rugs, 4 mm
- Acoustic panels, Cut pattern in PET felt, adds visual rhythm without changing the absorber
-
Ward noise floor
Alarms, trolleys and staff conversation in hard corridors. Absorption at the ceiling. Presses, robots and compressors are low frequency and structure-borne. Enclosure at the source rather than absorption on a far wall.
- Ceiling baffles and clouds, 9 to 24 mm
- Acoustic carpet and rugs, High density polyester
- Acoustic panels, ASTM C423
-
Cleanability
Non shedding, non absorbent surfaces that survive a cleaning regime. Prefabricated concrete passes speech and footfall between flats through thin connected elements. Mass is the only reliable answer.
- Ceiling baffles and clouds, Made to the drawing, standard and custom
- Acoustic carpet and rugs, Felt
- Acoustic panels, 9 to 24 mm, 1220 x 2440 mm standard, up to 2440 x 4270 mm, 1200 to 3600 GSM
Designers get colour, pattern and CNC options with the absorption figure attached to each. See how we work with interior designers.
04 / Conditions
What the Romania climate rules in and rules out
Romania is cold winters and warm summers, with a wide annual temperature range, and that narrows the material list before acoustics is discussed.
A wide annual swing stresses adhesive fixings and moves timber. Mechanical fixing beats adhesive alone, and PET felt is stable across the range.
The failure we design against here is adhesive failure and timber movement across the annual swing.
On a Romania job with a consultant involved, our part is material that matches the submitted data. See working with acoustic consultants.
06 / Read this first
Six mistakes that turn into a second fit-out
-
Fabric wrapped products in a clinical area
Noise with a source is fixed at the source. Treating the receiving room is the expensive way to get a small result.
-
Absorption used where privacy was the requirement
Privacy is a transmission problem. Absorption makes the room sound nicer and does not stop anyone hearing through the wall.
-
Ceiling void left open above a partition
The ceiling is almost always the largest untreated surface, so leaving it out means paying for panels that cannot reach the target.
-
Treating it as a generic Romania job
Direct sailings and good onward road connections make this one of the easier routes into central Europe.
05 / Supply
What the route into Romania actually looks like
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Constanța, then road inland |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Constanța |
| Support | Drawings, build-ups, BOQ and material that arrives complete |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Sea freight into Constanța, then road inland. Air freight for samples and urgent quantities.
Questions from Romania projects
What makes hospital and healthcare acoustics different in Romania?
District heating in older stock and split units throughout, with condensers on facades close to bedrooms. Direct sailings and good onward road connections make this one of the easier routes into central Europe.
Where should the budget go first on a Romania project?
Consulting room privacy. Speech privacy between rooms, which is partition, door and ceiling void work. Ward noise floor. Alarms, trolleys and staff conversation in hard corridors. Absorption at the ceiling.
Do you have an office or installation team in Romania?
No. We manufacture in India and supply into Romania. We give you drawings, build-ups, a BOQ and material that arrives complete, and we will tell you plainly when a job needs a local contractor we cannot be.
How does material get to a Romania site?
ships from: Palwal, Haryana, India, arrives at: Constanța, then road inland, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
What goes wrong most often on this kind of project?
Fabric wrapped products in a clinical area. Absorption used where privacy was the requirement.
What do you need from us to quote?
A plan, a section through the critical partition or ceiling, and what the room is for. From that we can give a build-up and a BOQ rather than a price per square foot.
Next step
Tell us the room, we will tell you the build-up
A plan and a section is enough. We will come back with a build-up, a BOQ and a delivered date, and we will say so if what you are asking for will not work.