Manufactured in India, supplied in Romania
Wooden slat acoustic panels in Romania
We manufacture wooden slat acoustic panels at our own plant at Palwal in Haryana, India, and supply them into Romania. Made at our own plant in India and shipped into Constanța, the largest port on the Black Sea, then road inland.
- Substrate
- MDF, FR MDF, HDF or HDHMR
- Patterns
- 13-3, 14-2, 28-4 and 59-5
- Panel sizes
- 2440 x 192 mm and 2440 x 128 mm
- Thickness
- 14, 16 and 18 mm
- Coverage
- 96 sq ft per unit
- Lead time
- Longer than felt
- Minimum order
- 500 sq ft, about 46 sq m
- EN 13501-1 Class B s1 d0 on FR substrate
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
We make this ourselves and ship it to you. No local branch, no borrowed certifications, no dealer margin. One batch across the whole order, and an honest answer when the product is wrong for the problem.
01 / The material
What you are buying, and what it fixes in Romania
Timber slats on an acoustic backing. The slats are the finish and the rhythm, the backing does the absorbing. Used where the room has to look considered rather than treated.
Work reaching us from Romania is mostly automotive and manufacturing plants, offices and service centres, panel block housing, schools, hospitals.
Communist era panel blocks with concrete walls and no impact isolation, plus new concrete towers with hard finishes.
- Slats on felt backing The standard. Absorption comes from the backing behind the gaps, so the slat gap ratio is an acoustic decision, not only a visual one.
- Slats on a cavity Backing plus an air gap behind moves absorption lower, which matters in music rooms.
- Feature wall only Slats where they are seen, plain felt elsewhere, to hold the budget where it shows.
- What it will not do A tight slat pattern looks denser but absorbs less, because the open area is what lets sound reach the backing. If the visual you want and the RT target you need pull apart, we will tell you which one the pattern is serving.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for wooden slat panels are on the main product page. This page covers what that means for a project in Romania.
02 / Specification sheet
The numbers, and they do not move by city
We publish one data sheet for every market. If a supplier quotes you a different figure for the same product in a different city, one of the two numbers is wrong.
- MDFStandard. Dry interiors, general commercial
- FR MDFFire rated. Public buildings and anywhere the specification calls for a class
- HDHMRMoisture resistant. Humid climates and rooms that see damp
| Substrate | MDF, FR MDF, HDF or HDHMR |
|---|---|
| Patterns | 13-3, 14-2, 28-4 and 59-5 |
| Panel sizes | 2440 x 192 mm and 2440 x 128 mm |
| Thickness | 14, 16 and 18 mm |
| Coverage | 96 sq ft per unit |
| Fire class | EN 13501-1 Class B s1 d0 on FR substrate |
On a Romania job with a consultant involved, our part is material that matches the submitted data. See working with acoustic consultants.
03 / What drives the brief
The Romania conditions that change the answer
- Constanța is a major port
Direct sailings and good onward road connections make this one of the easier routes into central Europe.
- Manufacturing plant noise
Presses, robots and compressors are low frequency and structure-borne. Enclosure at the source rather than absorption on a far wall.
- Panel block housing
Prefabricated concrete passes speech and footfall between flats through thin connected elements. Mass is the only reliable answer.
- Service centre floors
Large rooms full of people on calls, where privacy rather than echo is the real problem.
- Assembly and performance rooms
Church buildings and civic halls are tall hard volumes with very long reverberation.
Architects working in Romania usually need the build-up before the product. We will draw the section and mark what does the work. See how we support architects.
04 / Climate and durability
The Romania climate decides the material list
Romania is cold winters and warm summers, with a wide annual temperature range, and that narrows the sensible material list before acoustics is even discussed.
A wide annual swing stresses adhesive fixings and moves timber. Mechanical fixing beats adhesive alone, and PET felt is stable across the range.
The risk we design against here is adhesive failure and timber movement across the annual swing.
For a Romania interior where the finish leads, we will say plainly what each option costs you acoustically. See how we work with interior designers.
05 / Getting it there
What the route into Romania actually looks like
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Constanța, then road inland |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Constanța |
| Packing | Braced crates, slats supported along their length. Timber moves, so crates are kept flat and dry. |
| Lead time | Longer than felt. Confirmed against the pattern and substrate at quote stage. |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Sea freight into Constanța, then road inland. Air freight for samples and urgent quantities.
The same 500 sq ft minimum applies on export.
| Any specification | 500 sq ft, about 46 sq m |
|---|
One unit covers 96 sq ft, so the minimum is a little over five units. Substrate, slat pattern, width and thickness can be mixed inside the same order.
06 / Straight talk
Where this goes wrong, said plainly
-
The wrong product for the problem
A tight slat pattern looks denser but absorbs less, because the open area is what lets sound reach the backing. If the visual you want and the RT target you need pull apart, we will tell you which one the pattern is serving.
-
Coverage bought instead of a target
Lining every surface is a purchase, not a result. We would rather calculate the area against a reverberation target and sell you less of it.
-
Local approvals that nobody actually holds
We hold no Romania certification and we will not borrow one. The test data we publish is ours, and we will send the reports rather than describe them.
Romania: questions we are actually asked
Do you manufacture wooden slat acoustic panels in Romania?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Romania as the manufacturer rather than through a dealer. Made at our own plant in India and shipped into Constanța, the largest port on the Black Sea, then road inland. You buy at factory prices with one consistent batch across the order.
Why would a Romania build-up differ from anywhere else?
Direct sailings and good onward road connections make this one of the easier routes into central Europe. Presses, robots and compressors are low frequency and structure-borne. Enclosure at the source rather than absorption on a far wall. Those two things move the build-up far more than the panel figure does.
Will this material last in the Romania climate?
Romania is cold winters and warm summers, with a wide annual temperature range. A wide annual swing stresses adhesive fixings and moves timber. Mechanical fixing beats adhesive alone, and PET felt is stable across the range. The failure we design against here is adhesive failure and timber movement across the annual swing.
What is the delivery time into Romania?
ships from: Palwal, Haryana, India, arrives at: Constanța, then road inland, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
What should you not buy wooden slat acoustic panels for?
A tight slat pattern looks denser but absorbs less, because the open area is what lets sound reach the backing. If the visual you want and the RT target you need pull apart, we will tell you which one the pattern is serving.
How is the order packed and what is the minimum?
The same 500 sq ft minimum applies on export. Any specification, 500 sq ft, about 46 sq m. One unit covers 96 sq ft, so the minimum is a little over five units. Substrate, slat pattern, width and thickness can be mixed inside the same order. Braced crates, slats supported along their length. Timber moves, so crates are kept flat and dry.
Next step
Send a plan and a section, get a real build-up
One drawing gets you a proper answer. Build-up, quantities, a delivered date, and an honest note on anything we think is the wrong approach.