For projects in Rajkot
Venue and restaurant acoustics in Rajkot
Two different jobs that get quoted as one: keeping bass inside the building for the neighbours, and making the room comfortable enough that guests can talk. Solving one does nothing for the other. Auditoriums, banquet halls and places of worship are large hard volumes in concrete and stone where speech falls apart long before anyone calls the room echoey.
- Containment
- Low frequency through structure to flats above and beside. Mass, decoupling and a sealed envelope.
- Table level comfort
- Absorption at the ceiling so guests stop raising their voices at each other.
- Entrance and service
- Doors, lobbies and extract paths, which is where most of the leakage actually is.
- Quote
- From a plan and a section, within 48 hours
01 / Start here
The material, and what it actually does on a Rajkot job
Two different jobs that get quoted as one: keeping bass inside the building for the neighbours, and making the room comfortable enough that guests can talk. Solving one does nothing for the other.
Auditoriums, banquet halls and places of worship are large hard volumes in concrete and stone where speech falls apart long before anyone calls the room echoey.
Work reaching us from Rajkot is mostly foundries and machining halls, engineering units, offices, colleges, hospitals, showrooms.
- Foundry noise is structural Furnaces, hammers and heavy machine tools put energy into the floor. Isolation and mass address that, and absorption does not.
- Machining halls Continuous machine noise where instructions and alarms still have to be understood. Targeted absorption fixes intelligibility.
- Heat inside the building PET felt does not sag, shed fibre or degrade at high temperature, which matters in a foundry roof void.
- Containment Low frequency through structure to flats above and beside. Mass, decoupling and a sealed envelope.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for venue soundproofing are on the main product page. This page covers what that means for a project in Rajkot.
Nightclub and venue soundproofing SoundBlanket mass loaded vinyl
02 / The build-up
The build-up, layer by layer
-
Layer 1
SoundBlanket mass loaded vinyl
A limp, high density sheet that adds mass to a partition, floor or duct without adding depth. In Rajkot, heavy industrial plant across the state, so compressors, presses and generator sets sit close to offices and canteens inside the same building.
Duct and plant wrap. Membrane wrapped over the duct with a decoupling layer beneath, sealed at every lap.
-
Layer 2
Soundproofing materials
The blocking side of the range taken together: mass loaded vinyl, resilient layers, cavity absorption and the build-ups they belong in. In Rajkot, auditoriums, banquet halls and places of worship are large hard volumes in concrete and stone where speech falls apart long before anyone calls the room echoey.
Resilient bar. Where a full independent leaf will not fit. Effective, and very easy to short circuit with one wrong screw.
-
Layer 3
Acoustic carpet and rugs
A tile carpet with a dense polyester face on a felt backing. In Rajkot, large school and college campuses in concrete and tile, with assembly halls and auditoria in constant use.
Zoned. Carpet in the circulation and meeting zones, hard floor elsewhere, so the treatment sits where the noise is made.
Architects working in Rajkot usually need the build-up before the product. We will draw the section and mark what does the work. See how we support architects.
03 / On the ground
What we see driving Rajkot briefs
- Foundry noise is structural
Furnaces, hammers and heavy machine tools put energy into the floor. Isolation and mass address that, and absorption does not.
- Machining halls
Continuous machine noise where instructions and alarms still have to be understood. Targeted absorption fixes intelligibility.
- Heat inside the building
PET felt does not sag, shed fibre or degrade at high temperature, which matters in a foundry roof void.
- Two to three days by road
A dedicated truck from Palwal, with samples sent ahead of the order.
- Assembly and performance rooms
Auditoriums, banquet halls and places of worship are large hard volumes in concrete and stone where speech falls apart long before anyone calls the room echoey.
04 / Room by room
What each space in a Rajkot project needs
-
Containment
Low frequency through structure to flats above and beside. Mass, decoupling and a sealed envelope. Furnaces, hammers and heavy machine tools put energy into the floor. Isolation and mass address that, and absorption does not.
- Soundproofing materials, 2100 kg per cubic metre. 2.5 mm STC 30 at 5.25 kg per sq m, 4 mm STC 34 at 8.4, 6 mm at 12.6
- Wooden slat acoustic panels, 13-3, 14-2, 28-4 and 59-5
- Acoustic carpet and rugs, High density polyester
-
Table level comfort
Absorption at the ceiling so guests stop raising their voices at each other. Continuous machine noise where instructions and alarms still have to be understood. Targeted absorption fixes intelligibility.
- Soundproofing materials, 1800 x 900 x 20 mm, 100 kg per cubic metre, NRC 0.85
- Wooden slat acoustic panels, 2440 x 192 mm and 2440 x 128 mm
- Acoustic carpet and rugs, Felt
-
Entrance and service
Doors, lobbies and extract paths, which is where most of the leakage actually is. PET felt does not sag, shed fibre or degrade at high temperature, which matters in a foundry roof void.
- Soundproofing materials, Mass, then decoupling, then cavity absorption, then sealing
- Wooden slat acoustic panels, 14, 16 and 18 mm
- Acoustic carpet and rugs, 64 sq ft per pack
Interior designers tend to arrive with the look already decided. We will tell you which finish gets there without losing the acoustics. See how we work with interior designers.
04 / Durability
Why the climate in Rajkot changes the material, not the target
Rajkot is hot and dry for most of the year, with dust and high daytime surface temperatures, and that narrows the material list before acoustics is discussed.
Dust is the enemy of open-cell products. PET felt does not shed, does not hold dust in the way fabric-wrapped glass wool does, and wipes down. Timber needs a stable indoor RH or it moves.
The failure we design against here is dust ingress and thermal movement in long runs.
Where a consultant is already engaged on a Rajkot project, we supply to their specification and send the test reports rather than describing them. More on working with acoustic consultants.
06 / Read this first
Six mistakes that turn into a second fit-out
-
Panels on the wall as a neighbour noise solution
It sounds like a small detail until the room is finished and the complaint arrives.
-
A lobby with both doors able to open at once
Soundproofing fails at the gaps, not the materials. One unsealed service penetration can undo a correctly built wall.
-
Extract ducting that bypasses every wall you built
Plant noise treated as a room problem is the most reliable way to spend a budget and change nothing anyone can hear.
-
Treating it as a generic Rajkot job
Furnaces, hammers and heavy machine tools put energy into the floor. Isolation and mass address that, and absorption does not.
05 / Route to site
What the route into Rajkot actually looks like
| Made at | Our own plant, Palwal, Haryana |
|---|---|
| Reaches site in | two to three days |
| Dispatch | 2 to 4 working days |
| To site | two to three days |
| Support | Drawings, build-ups, BOQ and material that arrives complete |
Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
By road from Palwal, roughly one thousand kilometres, normally two to three days on a dedicated truck.
Questions from Rajkot projects
What makes venue and restaurant acoustics different in Rajkot?
Auditoriums, banquet halls and places of worship are large hard volumes in concrete and stone where speech falls apart long before anyone calls the room echoey. Furnaces, hammers and heavy machine tools put energy into the floor. Isolation and mass address that, and absorption does not.
Where should the budget go first on a Rajkot project?
Containment. Low frequency through structure to flats above and beside. Mass, decoupling and a sealed envelope. Table level comfort. Absorption at the ceiling so guests stop raising their voices at each other.
Do you have an office or installation team in Rajkot?
No. We manufacture in India and supply into Rajkot. We give you drawings, build-ups, a BOQ and material that arrives complete, and we will tell you plainly when a job needs a local contractor we cannot be.
How does material get to a Rajkot site?
made at: Our own plant, Palwal, Haryana, reaches site in: two to three days, dispatch: 2 to 4 working days. Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
What goes wrong most often on this kind of project?
Panels on the wall as a neighbour noise solution. A lobby with both doors able to open at once.
What do you need from us to quote?
A plan, a section through the critical partition or ceiling, and what the room is for. From that we can give a build-up and a BOQ rather than a price per square foot.
Next step
Drawings in, BOQ and a delivered date out
Send what you have. We will give you a layer by layer build-up, a bill of quantities and a date material lands, and we will flag anything in the brief that will not achieve what you want.