Manufactured in India, supplied in Qatar
Wood wool acoustic panels in Qatar
We manufacture wood wool acoustic panels at our own plant at Palwal in Haryana, India, and supply them into Qatar. Made at our own plant in India and shipped into Hamad Port, a short run from western India, then a short road leg to almost anywhere in the country.
- Panel size
- 1200 x 600 mm
- Thickness
- 20 mm
- Density
- 400 kg per cubic metre
- NRC
- 0.30
- Test standards
- ASTM C-423 and EN ISO 354
- Lead time
- 4 to 7 working days for standard sizes
- Minimum order
- 500 sq ft, about 46 sq m
- ASTM C-423 and EN ISO 354
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
We make this ourselves and ship it to you. No local branch, no borrowed certifications, no dealer margin. One batch across the whole order, and an honest answer when the product is wrong for the problem.
01 / What it is
The product, described honestly, for a Qatar brief
Wood fibre bound into a rigid board with an open texture. Robust, paintable and used where the surface takes knocks, which is why it ends up in schools, sports halls and plant rooms.
Work reaching us from Qatar is mostly venues and event spaces, hotels, towers and apartments, offices, hospitals, schools.
Towers and compound villas in concrete and block with stone floors. Rooms are live and impact noise passes straight through the slab.
- Direct fix Mechanically fixed to the soffit or wall. Durable and simple.
- On a cavity Mounted on battens with an air gap, which is where the low mid performance comes from.
- With a porous backing Board over mineral backing where the room needs more than the board alone gives.
- What it will not do At 20 mm it is a mid and high frequency absorber, not a bass solution, and painting it heavily will close the surface and reduce what it does. If a room needs low frequency control, depth or a cavity has to come from somewhere.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for wood wool panels are on the main product page. This page covers what that means for a project in Qatar.
02 / Specification
Published specification, identical wherever we ship it
We publish one data sheet for every market. If a supplier quotes you a different figure for the same product in a different city, one of the two numbers is wrong.
- Natural20 mm. Plant rooms, back of house, industrial
- Painted20 mm. Classrooms, halls, visible ceilings
| Panel size | 1200 x 600 mm |
|---|---|
| Thickness | 20 mm |
| Density | 400 kg per cubic metre |
| NRC | 0.30 |
| Test standards | ASTM C-423 and EN ISO 354 |
| Surface burning | Class A to ASTM E84 |
On a Qatar job with a consultant involved, our part is material that matches the submitted data. See working with acoustic consultants.
03 / In this market
What the buildings in Qatar do to the specification
- A short sea leg and a short road leg
Hamad Port is close to India by sea and close to everywhere by road, which makes the landed cost unusually predictable.
- Venues and assembly at scale
Large event and assembly spaces where amplified sound and intelligible speech both have to work in the same room.
- Sealed against extreme heat
Buildings stay closed with heavy cooling all year. Mechanical noise accumulates and rooms stay live.
- New concrete construction
The structure carries mass, so the recurring problem is reverberation inside and impact through slabs rather than airborne transfer.
- Assembly and performance rooms
Mosques, conference centres and hotel ballrooms are tall hard rooms carrying amplified speech over a long decay.
- School and campus buildings
International school and university campuses are new, glazed and built fast, with atria and sports halls the problem rooms.
If you are specifying for a Qatar project, we can give you a section, a BOQ and the honest limits of each layer. See how we support architects.
04 / Climate and durability
Durability in Qatar, before acoustics is discussed
Qatar is hot and dry for most of the year, with dust and high daytime surface temperatures, and that narrows the sensible material list before acoustics is even discussed.
Dust is the enemy of open-cell products. PET felt does not shed, does not hold dust in the way fabric-wrapped glass wool does, and wipes down. Timber needs a stable indoor RH or it moves.
The risk we design against here is dust ingress and thermal movement in long runs.
Interior designers tend to arrive with the look already decided. We will tell you which finish gets there without losing the acoustics. See how we work with interior designers.
05 / Logistics
What the route into Qatar actually looks like
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Hamad Port, then a short road run to site |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Hamad Port |
| Packing | Palletised flat, edge protected. Boards are rigid but the edges chip, so they travel protected. |
| Lead time | 4 to 7 working days for standard sizes. |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Sea freight into Hamad Port, then a short road run to site. Air freight for samples and urgent quantities.
The same 500 sq ft minimum applies on export.
| Any finish | 500 sq ft, about 46 sq m |
|---|
A panel is 1200 x 600 mm, which is 0.72 sq m or about 7.75 sq ft, so the minimum is roughly 65 panels.
06 / Read this first
Four honest warnings before you buy
-
The wrong product for the problem
At 20 mm it is a mid and high frequency absorber, not a bass solution, and painting it heavily will close the surface and reduce what it does. If a room needs low frequency control, depth or a cavity has to come from somewhere.
-
A number chased without a measurement
If nobody has measured the room or set a target, the specification is a guess with a decimal point in it. We will ask for the target before we quote the quantity.
-
A claim of being local to Qatar
We manufacture in India and supply here. We do not run an office in this city and we will not pretend to, because you would find out on the first site visit.
Qatar: questions we are actually asked
Are these wood wool acoustic panels made in Qatar?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Qatar as the manufacturer rather than through a dealer. Made at our own plant in India and shipped into Hamad Port, a short run from western India, then a short road leg to almost anywhere in the country. You buy at factory prices with one consistent batch across the order.
What decides the specification for a Qatar project?
Hamad Port is close to India by sea and close to everywhere by road, which makes the landed cost unusually predictable. Large event and assembly spaces where amplified sound and intelligible speech both have to work in the same room. Those two things move the build-up far more than the panel figure does.
Does Qatar weather shorten the life of this material?
Qatar is hot and dry for most of the year, with dust and high daytime surface temperatures. Dust is the enemy of open-cell products. PET felt does not shed, does not hold dust in the way fabric-wrapped glass wool does, and wipes down. Timber needs a stable indoor RH or it moves. The failure we design against here is dust ingress and thermal movement in long runs.
How does an order actually travel to Qatar?
ships from: Palwal, Haryana, India, arrives at: Hamad Port, then a short road run to site, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
What will wood wool acoustic panels not do?
At 20 mm it is a mid and high frequency absorber, not a bass solution, and painting it heavily will close the surface and reduce what it does. If a room needs low frequency control, depth or a cavity has to come from somewhere.
What is the minimum order and how is it packed?
The same 500 sq ft minimum applies on export. Any finish, 500 sq ft, about 46 sq m. A panel is 1200 x 600 mm, which is 0.72 sq m or about 7.75 sq ft, so the minimum is roughly 65 panels. Palletised flat, edge protected. Boards are rigid but the edges chip, so they travel protected.
Next step
Send the drawings, get a straight answer
Send what you have. We will give you a layer by layer build-up, a bill of quantities and a date material lands, and we will flag anything in the brief that will not achieve what you want.