Manufactured in India, supplied in Qatar
Acoustic foam and BassBloc in Qatar
We manufacture acoustic foam and BassBloc at our own plant at Palwal in Haryana, India, and supply them into Qatar. Made at our own plant in India and shipped into Hamad Port, a short run from western India, then a short road leg to almost anywhere in the country.
- BassBloc size
- 1800 x 900 mm
- BassBloc thickness
- 20 mm
- BassBloc density
- 100 kg per cubic metre
- Effective range
- 100 to 500 Hz
- BassBloc NRC
- 0.85
- Lead time
- 4 to 7 working days
- Minimum order
- From 200 sq ft
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
- Test reports sent on request, not just quoted
This comes from our own plant, not a trading desk. We do not have an office in your city and we will not invent one. What we can give you is factory pricing, consistent material and a technical answer before you commit.
01 / What it is
The material, and what it actually does on a Qatar job
Open cell foam shapes for high frequency control, and BassBloc, a high density absorber built for the low mid range where ordinary foam does nothing.
Work reaching us from Qatar is mostly venues and event spaces, hotels, towers and apartments, offices, hospitals, schools.
Towers and compound villas in concrete and block with stone floors. Rooms are live and impact noise passes straight through the slab.
- Corner loading Low frequency energy collects in corners, so absorber in the corners does more than the same area spread across a wall.
- First reflection points Mirror trick placement on side walls and ceiling, which is a handful of panels rather than a lined room.
- Behind a fabric frame Where the room has to look finished, absorber inside a frame rather than foam on show.
- What it will not do Thin foam on a wall is the most over-sold product in this industry. It controls flutter and nothing below it.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for acoustic foam and bass traps are on the main product page. This page covers what that means for a project in Qatar.
02 / Specification
One specification sheet, the same in every market
The specification below is the same everywhere we supply, because a specification that changed by city would not be a specification. What changes is which grade and build-up is the right buy, and that is what the rest of this page is about.
- Foam wedge and pyramidLow density. Flutter and high frequency only
- BassBloc100 kg per cubic metre. Low mid absorption, control rooms, live rooms
| BassBloc size | 1800 x 900 mm |
|---|---|
| BassBloc thickness | 20 mm |
| BassBloc density | 100 kg per cubic metre |
| Effective range | 100 to 500 Hz |
| BassBloc NRC | 0.85 |
Consultants get the raw data, not a sales sheet. That is the whole of our side of the job, and it is set out under working with acoustic consultants.
03 / In this market
What decides the build-up in Qatar
- A short sea leg and a short road leg
Hamad Port is close to India by sea and close to everywhere by road, which makes the landed cost unusually predictable.
- Venues and assembly at scale
Large event and assembly spaces where amplified sound and intelligible speech both have to work in the same room.
- Sealed against extreme heat
Buildings stay closed with heavy cooling all year. Mechanical noise accumulates and rooms stay live.
- New concrete construction
The structure carries mass, so the recurring problem is reverberation inside and impact through slabs rather than airborne transfer.
- The housing stock
Towers and compound villas in concrete and block with stone floors. Rooms are live and impact noise passes straight through the slab.
- The studio and content scene
Broadcast and production work sits inside commercial buildings where plant noise sets the achievable floor.
Architects working in Qatar usually need the build-up before the product. We will draw the section and mark what does the work. See how we support architects.
04 / Durability
Why the climate in Qatar changes the material, not the target
Qatar is hot and dry for most of the year, with dust and high daytime surface temperatures, and that narrows the sensible material list before acoustics is even discussed.
Dust is the enemy of open-cell products. PET felt does not shed, does not hold dust in the way fabric-wrapped glass wool does, and wipes down. Timber needs a stable indoor RH or it moves.
The risk we design against here is dust ingress and thermal movement in long runs.
For a Qatar interior where the finish leads, we will say plainly what each option costs you acoustically. See how we work with interior designers.
05 / Logistics
How material reaches a Qatar site
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Hamad Port, then a short road run to site |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Hamad Port |
| Packing | Compressed and boxed for foam, palletised flat for BassBloc. |
| Lead time | 4 to 7 working days. |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Sea freight into Hamad Port, then a short road run to site. Air freight for samples and urgent quantities.
The same minimums apply on export.
| Acoustic foam | 200 sq ft, about 19 sq m |
|---|---|
| BassBloc | 300 sq ft, about 28 sq m |
| Bass traps | 10 pieces |
A BassBloc panel is 1800 x 900 mm, which is 1.62 sq m or about 17.4 sq ft, so the BassBloc minimum is roughly 17 panels.
06 / Read this first
Four honest warnings before you buy
-
The wrong product for the problem
Thin foam on a wall is the most over-sold product in this industry. It controls flutter and nothing below it. If the complaint is boom, bass from a neighbour, or a room that sounds uneven at low frequency, foam is the wrong purchase and we will say so.
-
A number chased without a measurement
If nobody has measured the room or set a target, the specification is a guess with a decimal point in it. We will ask for the target before we quote the quantity.
-
Local approvals that nobody actually holds
We hold no Qatar certification and we will not borrow one. The test data we publish is ours, and we will send the reports rather than describe them.
07 / In projects
The material in real interiors
Qatar: questions we are actually asked
Do you manufacture acoustic foam and BassBloc in Qatar?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Qatar as the manufacturer rather than through a dealer. Made at our own plant in India and shipped into Hamad Port, a short run from western India, then a short road leg to almost anywhere in the country. You buy at factory prices with one consistent batch across the order.
What do you look at first on a Qatar enquiry?
Hamad Port is close to India by sea and close to everywhere by road, which makes the landed cost unusually predictable. Large event and assembly spaces where amplified sound and intelligible speech both have to work in the same room. Those two things move the build-up far more than the panel figure does.
How does the Qatar climate affect this product?
Qatar is hot and dry for most of the year, with dust and high daytime surface temperatures. Dust is the enemy of open-cell products. PET felt does not shed, does not hold dust in the way fabric-wrapped glass wool does, and wipes down. Timber needs a stable indoor RH or it moves. The failure we design against here is dust ingress and thermal movement in long runs.
How quickly can material reach a site in Qatar?
ships from: Palwal, Haryana, India, arrives at: Hamad Port, then a short road run to site, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
What should you not buy acoustic foam and BassBloc for?
Thin foam on a wall is the most over-sold product in this industry. It controls flutter and nothing below it. If the complaint is boom, bass from a neighbour, or a room that sounds uneven at low frequency, foam is the wrong purchase and we will say so.
How is the order packed and what is the minimum?
The same minimums apply on export. Acoustic foam, 200 sq ft, about 19 sq m. BassBloc, 300 sq ft, about 28 sq m. Bass traps, 10 pieces. A BassBloc panel is 1800 x 900 mm, which is 1.62 sq m or about 17.4 sq ft, so the BassBloc minimum is roughly 17 panels. Compressed and boxed for foam, palletised flat for BassBloc.
Next step
Send a plan and a section, get a real build-up
A plan and a section is enough. We will come back with a build-up, a BOQ and a delivered date, and we will say so if what you are asking for will not work.