Manufactured in India, supplied in Panipat
SoundBlanket mass loaded vinyl in Panipat
We manufacture soundBlanket mass loaded vinyl at our own plant at Palwal in Haryana, India, and supply them into Panipat. Panipat is ninety kilometres from our plant and runs on textiles and recycling, so most of what we send goes into working units.
- Density
- 2100 kg per cubic metre
- 2.5 mm
- STC 30, 5.25 kg per sq m
- 4 mm
- STC 34, 8.4 kg per sq m
- 6 mm
- 12.6 kg per sq m, STC on request
- Roll size
- 5 x 1.2 m, 6 sq m per roll
- Lead time
- 4 to 7 working days
- Minimum order
- From 10 rolls
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
- Test reports sent on request, not just quoted
We make this ourselves and ship it to you. No local branch, no borrowed certifications, no dealer margin. One batch across the whole order, and an honest answer when the product is wrong for the problem.
01 / What it is
The material, and what it actually does on a Panipat job
A limp, high density sheet that adds mass to a partition, floor or duct without adding depth. It is the barrier product, not an absorber, and it is the right answer when the problem is noise passing through a structure.
Work reaching us from Panipat is mostly textile and recycling units, workshops, offices, showrooms, schools, clinics, banquet halls.
Builder floors and RC frame apartments with tile and stone floors, often built floor by floor for separate households.
- Wall, decoupled Independent stud, membrane between the boards, cavity absorption, two boards. The membrane is one part of a system, never the whole answer.
- Floor, floating Membrane under a resilient layer and a floating deck, so impact energy is broken before it reaches the slab.
- Duct and plant wrap Membrane wrapped over the duct with a decoupling layer beneath, sealed at every lap.
- What it will not do Mass fixed hard to an existing wall gives far less than the same mass on an independent leaf. If we are told the wall cannot be thickened, we will say what the membrane will and will not achieve rather than quote the laboratory figure and let the site find out.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for SoundBlanket MLV are on the main product page. This page covers what that means for a project in Panipat.
02 / Specification
The numbers, and they do not move by city
Nothing below changes by location. The decisions that do change are grade, thickness and how the material is mounted, and those are covered further down.
- 2.5 mmSTC 30, 5.25 kg per sq m. Ducts, light partitions, retrofit where depth is tight
- 4 mmSTC 34, 8.4 kg per sq m. Party walls, floors, plant rooms, the common specification
- 6 mm12.6 kg per sq m. Machine enclosures and low frequency problems
| Density | 2100 kg per cubic metre |
|---|---|
| 2.5 mm | STC 30, 5.25 kg per sq m |
| 4 mm | STC 34, 8.4 kg per sq m |
| 6 mm | 12.6 kg per sq m, STC on request |
| Roll size | 5 x 1.2 m, 6 sq m per roll |
| Form | Limp sheet, cuts with a knife, seams lapped and sealed |
Consultants get the raw data, not a sales sheet. That is the whole of our side of the job, and it is set out under working with acoustic consultants.
03 / Local conditions
What the buildings in Panipat do to the specification
- Machinery, long shifts
Looms and processing machinery run continuously. Enclosure or barrier at the machine is the honest fix, not lining the hall.
- Ninety kilometres away
Same or next day delivery, immediate samples, and problems sorted in person rather than over email.
- Units beside housing
Noise leaving the building matters as much as noise inside it, and the two need different treatments.
- Cabins inside sheds
An office built into an industrial building has a noise floor nobody planned for. Mass in the partition beats any ceiling tile.
- The housing stock
Builder floors and RC frame apartments with tile and stone floors, often built floor by floor for separate households.
- The studio and content scene
Studios and content rooms go into builder floors and commercial units with neighbours on every side and a generator in the lane.
We would rather argue about the build-up at design stage than on site. See how we support architects.
04 / Durability
Why the climate in Panipat changes the material, not the target
Panipat is hot summers, mild winters and a distinct wet season, and that narrows the sensible material list before acoustics is even discussed.
PET felt handles the wet months without absorbing moisture or feeding mould. Timber and wood wool want a ventilated cavity and a stable indoor RH.
The risk we design against here is wet-season humidity behind linings.
Interior designers tend to arrive with the look already decided. We will tell you which finish gets there without losing the acoustics. See how we work with interior designers.
05 / Logistics
What the route into Panipat actually looks like
| Made at | Our own plant, Palwal, Haryana |
|---|---|
| Reaches site in | same or next day |
| Dispatch | 2 to 4 working days |
| To site | same or next day |
| Packing | Rolls on core tubes, wrapped and end capped, 5 x 1.2 m. Weights on the packing list, because a full roll is heavy and site access matters. |
| Lead time | 4 to 7 working days. Full container quantities scheduled against the vessel. |
Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
Same or next day by road from Palwal, about ninety kilometres. A shared vehicle or a dedicated truck, whichever suits the quantity.
10 rolls for 2.5 mm and 4 mm. Other thicknesses are made to order at 10 tonnes per thickness.
| 2.5 mm | 10 rolls, 60 sq m, about 315 kg |
|---|---|
| 4 mm | 10 rolls, 60 sq m, about 504 kg |
| 6 mm and other thicknesses | 10 tonnes per thickness |
A SoundBlanket roll is 5 x 1.2 m, which is 6 sq m. At 2100 kg per cubic metre a roll weighs about 31.5 kg at 2.5 mm and about 50.4 kg at 4 mm, so a 10 roll minimum is 60 sq m and roughly 315 kg at 2.5 mm or 504 kg at 4 mm.
06 / Before you buy
The things worth knowing before you place the order
-
The wrong product for the problem
Mass fixed hard to an existing wall gives far less than the same mass on an independent leaf. If we are told the wall cannot be thickened, we will say what the membrane will and will not achieve rather than quote the laboratory figure and let the site find out.
-
A number chased without a measurement
If nobody has measured the room or set a target, the specification is a guess with a decimal point in it. We will ask for the target before we quote the quantity.
-
Local approvals that nobody actually holds
We hold no Panipat certification and we will not borrow one. The test data we publish is ours, and we will send the reports rather than describe them.
Panipat: questions we are actually asked
Is there a Panipat factory behind this product?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Panipat as the manufacturer rather than through a dealer. Panipat is ninety kilometres from our plant and runs on textiles and recycling, so most of what we send goes into working units. You buy at factory prices with one consistent batch across the order.
What do you look at first on a Panipat enquiry?
Looms and processing machinery run continuously. Enclosure or barrier at the machine is the honest fix, not lining the hall. Same or next day delivery, immediate samples, and problems sorted in person rather than over email. Those two things move the build-up far more than the panel figure does.
Will this material last in the Panipat climate?
Panipat is hot summers, mild winters and a distinct wet season. PET felt handles the wet months without absorbing moisture or feeding mould. Timber and wood wool want a ventilated cavity and a stable indoor RH. The failure we design against here is wet-season humidity behind linings.
What is the delivery time into Panipat?
made at: Our own plant, Palwal, Haryana, reaches site in: same or next day, dispatch: 2 to 4 working days. Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
When are soundBlanket mass loaded vinyl the wrong purchase?
Mass fixed hard to an existing wall gives far less than the same mass on an independent leaf. If we are told the wall cannot be thickened, we will say what the membrane will and will not achieve rather than quote the laboratory figure and let the site find out.
What quantity do we have to order, and in what packaging?
10 rolls for 2.5 mm and 4 mm. Other thicknesses are made to order at 10 tonnes per thickness. 2.5 mm, 10 rolls, 60 sq m, about 315 kg. 4 mm, 10 rolls, 60 sq m, about 504 kg. 6 mm and other thicknesses, 10 tonnes per thickness. A SoundBlanket roll is 5 x 1.2 m, which is 6 sq m. At 2100 kg per cubic metre a roll weighs about 31.5 kg at 2.5 mm and about 50.4 kg at 4 mm, so a 10 roll minimum is 60 sq m and roughly 315 kg at 2.5 mm or 504 kg at 4 mm. Rolls on core tubes, wrapped and end capped, 5 x 1.2 m. Weights on the packing list, because a full roll is heavy and site access matters.
Next step
Tell us the room, we will tell you the build-up
One drawing gets you a proper answer. Build-up, quantities, a delivered date, and an honest note on anything we think is the wrong approach.