Manufactured in India, supplied in Norway
Acoustic foam and BassBloc in Norway
We manufacture acoustic foam and BassBloc at our own plant at Palwal in Haryana, India, and supply them into Norway. Made at our own plant in India and shipped into Oslo, then road onward, with the domestic leg quoted separately because Norway is a long country.
- BassBloc size
- 1800 x 900 mm
- BassBloc thickness
- 20 mm
- BassBloc density
- 100 kg per cubic metre
- Effective range
- 100 to 500 Hz
- BassBloc NRC
- 0.85
- Lead time
- 4 to 7 working days
- Minimum order
- From 200 sq ft
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
- Test reports sent on request, not just quoted
We make this ourselves and ship it to you. No local branch, no borrowed certifications, no dealer margin. One batch across the whole order, and an honest answer when the product is wrong for the problem.
01 / The material
What this material is and where it earns its place in Norway
Open cell foam shapes for high frequency control, and BassBloc, a high density absorber built for the low mid range where ordinary foam does nothing.
Work reaching us from Norway is mostly timber buildings and apartments, offices, schools, healthcare, hotels, studios.
Timber frame housing and concrete apartment blocks, both with very tight envelopes and hard internal finishes.
- Corner loading Low frequency energy collects in corners, so absorber in the corners does more than the same area spread across a wall.
- First reflection points Mirror trick placement on side walls and ceiling, which is a handful of panels rather than a lined room.
- Behind a fabric frame Where the room has to look finished, absorber inside a frame rather than foam on show.
- What it will not do Thin foam on a wall is the most over-sold product in this industry. It controls flutter and nothing below it.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for acoustic foam and bass traps are on the main product page. This page covers what that means for a project in Norway.
02 / Specification
The numbers, and they do not move by city
Nothing below changes by location. The decisions that do change are grade, thickness and how the material is mounted, and those are covered further down.
- Foam wedge and pyramidLow density. Flutter and high frequency only
- BassBloc100 kg per cubic metre. Low mid absorption, control rooms, live rooms
| BassBloc size | 1800 x 900 mm |
|---|---|
| BassBloc thickness | 20 mm |
| BassBloc density | 100 kg per cubic metre |
| Effective range | 100 to 500 Hz |
| BassBloc NRC | 0.85 |
If a consultant has set the target, we will quote against their figures rather than ours, and stay out of the scope they own. More on working with acoustic consultants.
03 / What drives the brief
The Norway conditions that change the answer
- Timber is light
Timber construction passes low frequency easily. Added mass and a decoupled layer do the work, and absorption alone will not.
- Classes are written and checked
Work arrives with a target and someone verifies it. Send us the class and we will say plainly where our material sits.
- Sealed through a long winter
Ventilation runs constantly in closed buildings, so plant noise matters far more than street noise.
- A long country
A site north of Oslo has a real domestic leg. We quote it separately so the programme is built on actual dates.
- The housing stock
Timber frame housing and concrete apartment blocks, both with very tight envelopes and hard internal finishes.
- The studio and content scene
A strong recording culture with rooms built to measured targets inside timber and concrete structures.
We would rather argue about the build-up at design stage than on site. See how we support architects.
04 / Climate and durability
Why the climate in Norway changes the material, not the target
Norway is cool and damp, with long heating seasons and cold external walls, and that narrows the sensible material list before acoustics is even discussed.
Cold wall build-ups and long heating seasons mean interstitial condensation is a real risk behind any lining. PET felt is unaffected by damp air and will not feed mould where a fabric-faced mineral product would.
The risk we design against here is condensation behind linings in older, poorly insulated stock.
Designers get colour, pattern and CNC options with the absorption figure attached to each. See how we work with interior designers.
05 / Getting it there
Supply into Norway, start to site
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Oslo, then road onward to site |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Oslo |
| Packing | Compressed and boxed for foam, palletised flat for BassBloc. |
| Lead time | 4 to 7 working days. |
Standard items dispatch in 4 to 7 working days. The sea leg from India is long, so plan the full door to door window into the programme. We give real dates, not optimistic ones.
Sea freight into Oslo, then road onward to site. Air freight for samples and urgent quantities.
The same minimums apply on export.
| Acoustic foam | 200 sq ft, about 19 sq m |
|---|---|
| BassBloc | 300 sq ft, about 28 sq m |
| Bass traps | 10 pieces |
A BassBloc panel is 1800 x 900 mm, which is 1.62 sq m or about 17.4 sq ft, so the BassBloc minimum is roughly 17 panels.
06 / Straight talk
What we will tell you that a reseller will not
-
The wrong product for the problem
Thin foam on a wall is the most over-sold product in this industry. It controls flutter and nothing below it. If the complaint is boom, bass from a neighbour, or a room that sounds uneven at low frequency, foam is the wrong purchase and we will say so.
-
Square footage quoted before the room is understood
Anyone can price a wall. Working out how much material the room actually needs usually reduces the order, which is why not everyone does it.
-
Local approvals that nobody actually holds
We hold no Norway certification and we will not borrow one. The test data we publish is ours, and we will send the reports rather than describe them.
07 / In projects
How it looks once it is installed
Norway: questions we are actually asked
Do you manufacture acoustic foam and BassBloc in Norway?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Norway as the manufacturer rather than through a dealer. Made at our own plant in India and shipped into Oslo, then road onward, with the domestic leg quoted separately because Norway is a long country. You buy at factory prices with one consistent batch across the order.
What changes the specification on a Norway job?
Timber construction passes low frequency easily. Added mass and a decoupled layer do the work, and absorption alone will not. Work arrives with a target and someone verifies it. Send us the class and we will say plainly where our material sits. Those two things move the build-up far more than the panel figure does.
Does Norway weather shorten the life of this material?
Norway is cool and damp, with long heating seasons and cold external walls. Cold wall build-ups and long heating seasons mean interstitial condensation is a real risk behind any lining. PET felt is unaffected by damp air and will not feed mould where a fabric-faced mineral product would. The failure we design against here is condensation behind linings in older, poorly insulated stock.
How does an order actually travel to Norway?
ships from: Palwal, Haryana, India, arrives at: Oslo, then road onward to site, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. The sea leg from India is long, so plan the full door to door window into the programme. We give real dates, not optimistic ones.
Where do acoustic foam and BassBloc fail to help?
Thin foam on a wall is the most over-sold product in this industry. It controls flutter and nothing below it. If the complaint is boom, bass from a neighbour, or a room that sounds uneven at low frequency, foam is the wrong purchase and we will say so.
What is the minimum order and how is it packed?
The same minimums apply on export. Acoustic foam, 200 sq ft, about 19 sq m. BassBloc, 300 sq ft, about 28 sq m. Bass traps, 10 pieces. A BassBloc panel is 1800 x 900 mm, which is 1.62 sq m or about 17.4 sq ft, so the BassBloc minimum is roughly 17 panels. Compressed and boxed for foam, palletised flat for BassBloc.
Next step
Tell us the room, we will tell you the build-up
Send what you have. We will give you a layer by layer build-up, a bill of quantities and a date material lands, and we will flag anything in the brief that will not achieve what you want.