Manufactured in India, supplied in Mexico
PET felt acoustic panels in Mexico
We manufacture PET felt acoustic panels at our own plant at Palwal in Haryana, India, and supply them into Mexico. Made at our own plant in India and shipped into Manzanillo on the Pacific or Veracruz on the Gulf, whichever suits the site better.
- Material
- 100% PET non-woven, no added binder
- Thickness
- 9, 12, 18 and 24 mm standard, tolerance plus or minus 5 percent
- Custom thickness
- 4 to 24 mm
- Panel size
- 1220 x 2440 mm standard, 4 x 8 ft
- Maximum size
- 2440 x 4270 mm, 2.44 x 4.27 m, 8 x 14 ft
- Lead time
- 4 to 7 working days for standard colours and thicknesses
- Minimum order
- From 10 panels
- ASTM C423
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
We are the manufacturer. There is no local office and we do not claim approvals we do not hold. What you get is factory pricing, one consistent batch across the order, and a straight answer on what the material will and will not do.
01 / Start here
The material, and what it actually does on a Mexico job
A rigid non-woven panel pressed from 100% polyester fibre, a large part of it recycled. It absorbs mid and high frequency energy and finishes as the visible surface, so it is both the acoustic layer and the finish.
Work reaching us from Mexico is mostly manufacturing plants, corporate offices, hotels and resorts, apartments, schools, hospitals.
Concrete and block construction with hard tile floors, in apartment blocks and houses that share walls and slabs.
- Direct to wall Panel bonded or mechanically fixed flat to the substrate. Simplest, and the weakest at low frequency.
- On a 25 to 50 mm air gap The same panel on battens. The air gap moves absorption down in frequency at no extra material cost, and is the cheapest improvement available.
- Over a porous backing Panel over mineral or PET backing where the room needs genuine low mid control.
- What it will not do It absorbs. It does not block.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for PET felt panels are on the main product page. This page covers what that means for a project in Mexico.
02 / Data sheet
Published specification, identical wherever we ship it
Nothing below changes by location. The decisions that do change are grade, thickness and how the material is mounted, and those are covered further down.
- EchoCore 151500 GSM. Offices, classrooms, general commercial
- EchoPro 181800 GSM. Studios, auditoria, rooms with a written RT target
- EchoMax 222200 GSM. High occupancy and high level spaces
| Material | 100% PET non-woven, no added binder |
|---|---|
| Thickness | 9, 12, 18 and 24 mm standard, tolerance plus or minus 5 percent |
| Custom thickness | 4 to 24 mm |
| Panel size | 1220 x 2440 mm standard, 4 x 8 ft |
| Maximum size | 2440 x 4270 mm, 2.44 x 4.27 m, 8 x 14 ft |
| Density range | 1200 to 3600 GSM |
| NRC | 0.30 at 9 mm, rising with thickness and air gap |
| Test standard | ASTM C423 |
On a Mexico job with a consultant involved, our part is material that matches the submitted data. See working with acoustic consultants.
03 / Local conditions
The Mexico conditions that change the answer
- Resort programmes are fixed
Coastal hotel openings do not move, so real dispatch and transit dates matter more than a marginally better price.
- New plants at pace
Greenfield manufacturing going up quickly. Enclosure and partition detail designed in now costs a fraction of fixing it after commissioning.
- Block and concrete construction
Walls carry mass, so the usual problem is hard live rooms and plant noise rather than conversation through a wall.
- Two coasts, two ports
Manzanillo serves the west and centre, Veracruz the east. We route to whichever shortens your inland leg.
- School and campus buildings
Classrooms are concrete and tile with large class sizes, and covered courtyards amplify everything.
Architects working in Mexico usually need the build-up before the product. We will draw the section and mark what does the work. See how we support architects.
04 / Climate
The Mexico climate decides the material list
Mexico is hot summers, mild winters and a distinct wet season, and that narrows the sensible material list before acoustics is even discussed.
PET felt handles the wet months without absorbing moisture or feeding mould. Timber and wood wool want a ventilated cavity and a stable indoor RH.
The risk we design against here is wet-season humidity behind linings.
If the visual is fixed and the room still has to perform, that is a solvable problem and a conversation worth having early. See how we work with interior designers.
05 / Supply
How material reaches a Mexico site
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Manzanillo or Veracruz, then road to site |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Manzanillo |
| Packing | Palletised flat and film wrapped, cut sheets interleaved. Packing list and weights issued with the quote. |
| Lead time | 4 to 7 working days for standard colours and thicknesses. Grooved and custom colours take longer, and we say so before you order. |
Standard items dispatch in 4 to 7 working days. The sea leg from India is long, so plan the full door to door window into the programme. We give real dates, not optimistic ones.
Sea freight into Manzanillo or Veracruz, then road to site. Air freight for samples and urgent quantities.
200 panels for a trial order, in any mix of thickness, GSM and colour. Beyond a trial we would rather quote a container load, because the price per panel and the freight per panel both fall sharply and a part load pays for space it does not use.
| Trial order | 200 panels, 6,400 sq ft, mixed thickness, GSM and colour |
|---|---|
| Recommended | Full container, for the best price per panel and the lowest freight per panel |
A panel is 1220 x 2440 mm, which is 32 sq ft.
06 / Straight talk
Four honest warnings before you buy
-
The wrong product for the problem
It absorbs. It does not block. A PET panel on a shared wall will make the room sound better and will not stop the neighbour being heard. If the brief is stopping noise passing through a wall or floor, the answer is mass and decoupling, and we will say so before quoting.
-
Coverage bought instead of a target
Lining every surface is a purchase, not a result. We would rather calculate the area against a reverberation target and sell you less of it.
-
Suppliers who imply a Mexico presence
Ask any supplier where the material is made and who carries the warranty. We make it at Palwal in Haryana and we say so on every page, including this one.
Mexico: questions we are actually asked
Is there a Mexico factory behind this product?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Mexico as the manufacturer rather than through a dealer. Made at our own plant in India and shipped into Manzanillo on the Pacific or Veracruz on the Gulf, whichever suits the site better. You buy at factory prices with one consistent batch across the order.
Why would a Mexico build-up differ from anywhere else?
Greenfield manufacturing going up quickly. Enclosure and partition detail designed in now costs a fraction of fixing it after commissioning. Walls carry mass, so the usual problem is hard live rooms and plant noise rather than conversation through a wall. Those two things move the build-up far more than the panel figure does.
How does the Mexico climate affect this product?
Mexico is hot summers, mild winters and a distinct wet season. PET felt handles the wet months without absorbing moisture or feeding mould. Timber and wood wool want a ventilated cavity and a stable indoor RH. The failure we design against here is wet-season humidity behind linings.
When would material land on a Mexico site?
ships from: Palwal, Haryana, India, arrives at: Manzanillo or Veracruz, then road to site, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. The sea leg from India is long, so plan the full door to door window into the programme. We give real dates, not optimistic ones.
What will PET felt acoustic panels not do?
It absorbs. It does not block. A PET panel on a shared wall will make the room sound better and will not stop the neighbour being heard. If the brief is stopping noise passing through a wall or floor, the answer is mass and decoupling, and we will say so before quoting.
Is there a minimum order, and how does it arrive?
200 panels for a trial order, in any mix of thickness, GSM and colour. Beyond a trial we would rather quote a container load, because the price per panel and the freight per panel both fall sharply and a part load pays for space it does not use. Trial order, 200 panels, 6,400 sq ft, mixed thickness, GSM and colour. Recommended, Full container, for the best price per panel and the lowest freight per panel. A panel is 1220 x 2440 mm, which is 32 sq ft. Palletised flat and film wrapped, cut sheets interleaved. Packing list and weights issued with the quote.
Next step
Send a plan and a section, get a real build-up
We quote from drawings, not from a square foot rate. Send a plan and the section through the critical wall or ceiling and you will get something you can actually build from.