For projects in Mexico
Home theatre soundproofing and acoustics in Mexico
Serious equipment in a room with no isolation plan. The complaint is almost never the speakers. It is bass leaving the room and an untreated box making the system sound worse than it is. Concrete and block construction with hard tile floors, in apartment blocks and houses that share walls and slabs.
- Containment
- Bass through the wall, floor and door. Mass and decoupling, with the door usually the weakest point.
- Low frequency inside
- Corner absorption with depth, before any surface treatment.
- Reflections
- Side wall and ceiling first reflection points at the seating position.
- Quote
- From a plan and a section, within 48 hours
01 / Start here
The product, described honestly, for a Mexico brief
Serious equipment in a room with no isolation plan. The complaint is almost never the speakers. It is bass leaving the room and an untreated box making the system sound worse than it is.
Concrete and block construction with hard tile floors, in apartment blocks and houses that share walls and slabs.
Work reaching us from Mexico is mostly manufacturing plants, corporate offices, hotels and resorts, apartments, schools, hospitals.
- New plants at pace Greenfield manufacturing going up quickly. Enclosure and partition detail designed in now costs a fraction of fixing it after commissioning.
- Block and concrete construction Walls carry mass, so the usual problem is hard live rooms and plant noise rather than conversation through a wall.
- Two coasts, two ports Manzanillo serves the west and centre, Veracruz the east. We route to whichever shortens your inland leg.
- Containment Bass through the wall, floor and door. Mass and decoupling, with the door usually the weakest point.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for home theatre soundproofing are on the main product page. This page covers what that means for a project in Mexico.
02 / The build-up
How the layers stack, from the structure inwards
-
Layer 1
Acoustic foam and BassBloc
Open cell foam shapes for high frequency control, and BassBloc, a high density absorber built for the low mid range where ordinary foam does nothing. In Mexico, split units and VRF with condensers on facades and rooftops close to occupied rooms.
Behind a fabric frame. Where the room has to look finished, absorber inside a frame rather than foam on show.
-
Layer 2
Soundproofing materials
The blocking side of the range taken together: mass loaded vinyl, resilient layers, cavity absorption and the build-ups they belong in. In Mexico, church buildings, event halls and auditoria are large hard volumes carrying amplified music.
Floating floor. Resilient layer and deck, to break impact energy before it reaches the structure.
-
Layer 3
Acoustic carpet and rugs
A tile carpet with a dense polyester face on a felt backing. In Mexico, classrooms are concrete and tile with large class sizes, and covered courtyards amplify everything.
Over a resilient underlay. Where impact noise to the floor below is the actual complaint, the underlay does that work, not the carpet.
If you are specifying for a Mexico project, we can give you a section, a BOQ and the honest limits of each layer. See how we support architects.
03 / What drives the brief
The Mexico conditions that change the answer
- New plants at pace
Greenfield manufacturing going up quickly. Enclosure and partition detail designed in now costs a fraction of fixing it after commissioning.
- Block and concrete construction
Walls carry mass, so the usual problem is hard live rooms and plant noise rather than conversation through a wall.
- Two coasts, two ports
Manzanillo serves the west and centre, Veracruz the east. We route to whichever shortens your inland leg.
- Resort programmes are fixed
Coastal hotel openings do not move, so real dispatch and transit dates matter more than a marginally better price.
- The housing stock
Concrete and block construction with hard tile floors, in apartment blocks and houses that share walls and slabs.
04 / Room by room
What each space in a Mexico project needs
-
Containment
Bass through the wall, floor and door. Mass and decoupling, with the door usually the weakest point. Greenfield manufacturing going up quickly. Enclosure and partition detail designed in now costs a fraction of fixing it after commissioning.
- SoundBlanket mass loaded vinyl, 2100 kg per cubic metre
- Acoustic foam and BassBloc, 20 mm
- Soundproofing materials, Mass, then decoupling, then cavity absorption, then sealing
-
Low frequency inside
Corner absorption with depth, before any surface treatment. Walls carry mass, so the usual problem is hard live rooms and plant noise rather than conversation through a wall.
- SoundBlanket mass loaded vinyl, STC 30, 5.25 kg per sq m
- Acoustic foam and BassBloc, 100 kg per cubic metre
- Soundproofing materials, ASTM E90 for the barrier, ASTM C423 for the absorber
-
Reflections
Side wall and ceiling first reflection points at the seating position. Manzanillo serves the west and centre, Veracruz the east. We route to whichever shortens your inland leg.
- SoundBlanket mass loaded vinyl, STC 34, 8.4 kg per sq m
- Acoustic foam and BassBloc, 100 to 500 Hz
- Soundproofing materials, 2100 kg per cubic metre. 2.5 mm STC 30 at 5.25 kg per sq m, 4 mm STC 34 at 8.4, 6 mm at 12.6
For a Mexico interior where the finish leads, we will say plainly what each option costs you acoustically. See how we work with interior designers.
04 / Durability
The Mexico climate decides the material list
Mexico is hot summers, mild winters and a distinct wet season, and that narrows the material list before acoustics is discussed.
PET felt handles the wet months without absorbing moisture or feeding mould. Timber and wood wool want a ventilated cavity and a stable indoor RH.
The failure we design against here is wet-season humidity behind linings.
Consultants get the raw data, not a sales sheet. That is the whole of our side of the job, and it is set out under working with acoustic consultants.
06 / Read this first
What we watch go wrong on jobs like this
-
Foam on the walls as a soundproofing measure
Small on the drawing, expensive on site, and almost always found after handover.
-
A standard door on a room built to hold bass
Soundproofing fails at the gaps, not the materials. One unsealed service penetration can undo a correctly built wall.
-
Treating before the room is sealed
A gap undoes the partition it sits in. Sealing is the cheapest line on the quote and the first one to get cut.
-
Treating it as a generic Mexico job
Greenfield manufacturing going up quickly. Enclosure and partition detail designed in now costs a fraction of fixing it after commissioning.
05 / Getting it there
What the route into Mexico actually looks like
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Manzanillo or Veracruz, then road to site |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Manzanillo |
| Support | Drawings, build-ups, BOQ and material that arrives complete |
Standard items dispatch in 4 to 7 working days. The sea leg from India is long, so plan the full door to door window into the programme. We give real dates, not optimistic ones.
Sea freight into Manzanillo or Veracruz, then road to site. Air freight for samples and urgent quantities.
Questions from Mexico projects
What makes home theatre soundproofing and acoustics different in Mexico?
Concrete and block construction with hard tile floors, in apartment blocks and houses that share walls and slabs. Greenfield manufacturing going up quickly. Enclosure and partition detail designed in now costs a fraction of fixing it after commissioning.
Where should the budget go first on a Mexico project?
Containment. Bass through the wall, floor and door. Mass and decoupling, with the door usually the weakest point. Low frequency inside. Corner absorption with depth, before any surface treatment.
Do you have an office or installation team in Mexico?
No. We manufacture in India and supply into Mexico. We give you drawings, build-ups, a BOQ and material that arrives complete, and we will tell you plainly when a job needs a local contractor we cannot be.
How does material get to a Mexico site?
ships from: Palwal, Haryana, India, arrives at: Manzanillo or Veracruz, then road to site, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. The sea leg from India is long, so plan the full door to door window into the programme. We give real dates, not optimistic ones.
What goes wrong most often on this kind of project?
Foam on the walls as a soundproofing measure. A standard door on a room built to hold bass.
What do you need from us to quote?
A plan, a section through the critical partition or ceiling, and what the room is for. From that we can give a build-up and a BOQ rather than a price per square foot.
Next step
Send a plan and a section, get a real build-up
Send what you have. We will give you a layer by layer build-up, a bill of quantities and a date material lands, and we will flag anything in the brief that will not achieve what you want.