Manufactured in India, supplied in Manila
Acoustic foam and BassBloc in Manila
We manufacture acoustic foam and BassBloc at our own plant at Palwal in Haryana, India, and supply them into Manila. Made at our own plant in India and shipped into Manila, then a short road run to site.
- BassBloc size
- 1800 x 900 mm
- BassBloc thickness
- 20 mm
- BassBloc density
- 100 kg per cubic metre
- Effective range
- 100 to 500 Hz
- BassBloc NRC
- 0.85
- Lead time
- 4 to 7 working days
- Minimum order
- From 200 sq ft
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
- Test reports sent on request, not just quoted
This comes from our own plant, not a trading desk. We do not have an office in your city and we will not invent one. What we can give you is factory pricing, consistent material and a technical answer before you commit.
01 / What it is
The material, and what it actually does on a Manila job
Open cell foam shapes for high frequency control, and BassBloc, a high density absorber built for the low mid range where ordinary foam does nothing.
Work reaching us from Manila is mostly service and call centre floors, offices, condominium towers, hotels, hospitals, schools.
Concrete and block construction with hard floors, in condominium towers and low rise housing that share walls and slabs.
- Corner loading Low frequency energy collects in corners, so absorber in the corners does more than the same area spread across a wall.
- First reflection points Mirror trick placement on side walls and ceiling, which is a handful of panels rather than a lined room.
- Behind a fabric frame Where the room has to look finished, absorber inside a frame rather than foam on show.
- What it will not do Thin foam on a wall is the most over-sold product in this industry. It controls flutter and nothing below it.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for acoustic foam and bass traps are on the main product page. This page covers what that means for a project in Manila.
02 / Data sheet
The published figures, unchanged by location
The specification below is the same everywhere we supply, because a specification that changed by city would not be a specification. What changes is which grade and build-up is the right buy, and that is what the rest of this page is about.
- Foam wedge and pyramidLow density. Flutter and high frequency only
- BassBloc100 kg per cubic metre. Low mid absorption, control rooms, live rooms
| BassBloc size | 1800 x 900 mm |
|---|---|
| BassBloc thickness | 20 mm |
| BassBloc density | 100 kg per cubic metre |
| Effective range | 100 to 500 Hz |
| BassBloc NRC | 0.85 |
Consultants get the raw data, not a sales sheet. That is the whole of our side of the job, and it is set out under working with acoustic consultants.
03 / On the ground
What decides the build-up in Manila
- Hundreds of simultaneous conversations
A call floor is not an echo problem. Absorption alone will not deliver privacy or intelligibility, so ceiling, screens and layout have to work together.
- Concrete towers, hard interiors
The structure blocks well. The problem is tile and glass making the room ring, and impact passing down through slabs.
- Typhoon season and humidity
PET felt does not absorb moisture, rot or feed mould, which matters where mineral products sag within a season.
- Traffic outside, all day
Street noise reaches rooms through glazing rather than walls, so the facade is where the first money should go.
- The housing stock
Concrete and block construction with hard floors, in condominium towers and low rise housing that share walls and slabs.
- The studio and content scene
A very large content, dubbing and music sector working inside commercial floors with thin partitions.
We would rather argue about the build-up at design stage than on site. See how we support architects.
04 / Conditions
The Manila climate decides the material list
Manila is warm and humid through most of the year, with a long wet season, and that narrows the sensible material list before acoustics is even discussed.
Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them.
The risk we design against here is mould, sagging fabric finishes and swelling in timber.
Designers get colour, pattern and CNC options with the absorption figure attached to each. See how we work with interior designers.
05 / Getting it there
Supply into Manila, start to site
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Manila, then a short road run to site |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Manila |
| Packing | Compressed and boxed for foam, palletised flat for BassBloc. |
| Lead time | 4 to 7 working days. |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Sea freight into Manila, then a short road run to site. Air freight for samples and urgent quantities.
The same minimums apply on export.
| Acoustic foam | 200 sq ft, about 19 sq m |
|---|---|
| BassBloc | 300 sq ft, about 28 sq m |
| Bass traps | 10 pieces |
A BassBloc panel is 1800 x 900 mm, which is 1.62 sq m or about 17.4 sq ft, so the BassBloc minimum is roughly 17 panels.
06 / Before you buy
What we will tell you that a reseller will not
-
The wrong product for the problem
Thin foam on a wall is the most over-sold product in this industry. It controls flutter and nothing below it. If the complaint is boom, bass from a neighbour, or a room that sounds uneven at low frequency, foam is the wrong purchase and we will say so.
-
Coverage bought instead of a target
Lining every surface is a purchase, not a result. We would rather calculate the area against a reverberation target and sell you less of it.
-
A claim of being local to Manila
We manufacture in India and supply here. We do not run an office in this city and we will not pretend to, because you would find out on the first site visit.
07 / In projects
The product on finished jobs
Manila: questions we are actually asked
Do you manufacture acoustic foam and BassBloc in Manila?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Manila as the manufacturer rather than through a dealer. Made at our own plant in India and shipped into Manila, then a short road run to site. You buy at factory prices with one consistent batch across the order.
What do you look at first on a Manila enquiry?
A call floor is not an echo problem. Absorption alone will not deliver privacy or intelligibility, so ceiling, screens and layout have to work together. The structure blocks well. The problem is tile and glass making the room ring, and impact passing down through slabs. Those two things move the build-up far more than the panel figure does.
Will this material last in the Manila climate?
Manila is warm and humid through most of the year, with a long wet season. Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them. The failure we design against here is mould, sagging fabric finishes and swelling in timber.
What is the delivery time into Manila?
ships from: Palwal, Haryana, India, arrives at: Manila, then a short road run to site, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
When are acoustic foam and BassBloc the wrong purchase?
Thin foam on a wall is the most over-sold product in this industry. It controls flutter and nothing below it. If the complaint is boom, bass from a neighbour, or a room that sounds uneven at low frequency, foam is the wrong purchase and we will say so.
What is the minimum order and how is it packed?
The same minimums apply on export. Acoustic foam, 200 sq ft, about 19 sq m. BassBloc, 300 sq ft, about 28 sq m. Bass traps, 10 pieces. A BassBloc panel is 1800 x 900 mm, which is 1.62 sq m or about 17.4 sq ft, so the BassBloc minimum is roughly 17 panels. Compressed and boxed for foam, palletised flat for BassBloc.
Next step
Tell us the room, we will tell you the build-up
We quote from drawings, not from a square foot rate. Send a plan and the section through the critical wall or ceiling and you will get something you can actually build from.