Manufactured in India, supplied in Maldives
Wood wool acoustic panels in Maldives
We manufacture wood wool acoustic panels at our own plant at Palwal in Haryana, India, and supply them into Maldives. Made at our own plant in India and shipped into Malé, then transferred by boat to the island.
- Panel size
- 1200 x 600 mm
- Thickness
- 20 mm
- Density
- 400 kg per cubic metre
- NRC
- 0.30
- Test standards
- ASTM C-423 and EN ISO 354
- Lead time
- 4 to 7 working days for standard sizes
- Minimum order
- 500 sq ft, about 46 sq m
- ASTM C-423 and EN ISO 354
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
Manufacturer, not reseller. We hold no local approvals and will not imply we do. You get the price the factory quotes, material that matches across a large order, and advice that sometimes talks you out of a purchase.
01 / What it is
The material, and what it actually does on a Maldives job
Wood fibre bound into a rigid board with an open texture. Robust, paintable and used where the surface takes knocks, which is why it ends up in schools, sports halls and plant rooms.
Work reaching us from Maldives is mostly resort villas and guest rooms, spas, restaurants and bars, staff accommodation, back of house.
Concrete and block construction with hard floors, on islands where buildings sit close together and plant is never far from a bedroom.
- Direct fix Mechanically fixed to the soffit or wall. Durable and simple.
- On a cavity Mounted on battens with an air gap, which is where the low mid performance comes from.
- With a porous backing Board over mineral backing where the room needs more than the board alone gives.
- What it will not do At 20 mm it is a mid and high frequency absorber, not a bass solution, and painting it heavily will close the surface and reduce what it does. If a room needs low frequency control, depth or a cavity has to come from somewhere.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for wood wool panels are on the main product page. This page covers what that means for a project in Maldives.
02 / The numbers
Published specification, identical wherever we ship it
Nothing below changes by location. The decisions that do change are grade, thickness and how the material is mounted, and those are covered further down.
- Natural20 mm. Plant rooms, back of house, industrial
- Painted20 mm. Classrooms, halls, visible ceilings
| Panel size | 1200 x 600 mm |
|---|---|
| Thickness | 20 mm |
| Density | 400 kg per cubic metre |
| NRC | 0.30 |
| Test standards | ASTM C-423 and EN ISO 354 |
| Surface burning | Class A to ASTM E84 |
Consultants get the raw data, not a sales sheet. That is the whole of our side of the job, and it is set out under working with acoustic consultants.
03 / On the ground
What the buildings in Maldives do to the specification
- The last leg is by sea
Landing craft transfer means handling, spray and limited lifting. We wrap, brace and size pallets for that rather than for a truck dock.
- Salt air is relentless
PET felt does not absorb moisture, rot or corrode. On an atoll that is not a preference, it is the only sensible choice.
- Villas are lightly built
Timber and light structures over water with little mass. Isolation between villas is limited by the construction, and we say so rather than overselling.
- A short sea leg from India
Western India to Malé is quick, which makes modest and staged consignments practical for a resort refurbishment.
- Assembly and performance rooms
Mosques, resort function rooms and conference spaces are hard volumes carrying amplified speech.
- School and campus buildings
School buildings are hard and naturally ventilated with open corridors and small hard halls.
Architects working in Maldives usually need the build-up before the product. We will draw the section and mark what does the work. See how we support architects.
04 / Climate
Why the climate in Maldives changes the material, not the target
Maldives is warm and humid through most of the year, with a long wet season, and that narrows the sensible material list before acoustics is even discussed.
Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them.
The risk we design against here is mould, sagging fabric finishes and swelling in timber.
Designers get colour, pattern and CNC options with the absorption figure attached to each. See how we work with interior designers.
05 / Supply
How material reaches a Maldives site
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Malé, then boat transfer to the island |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Malé, then boat |
| Packing | Palletised flat, edge protected. Boards are rigid but the edges chip, so they travel protected. |
| Lead time | 4 to 7 working days for standard sizes. |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Sea freight into Malé, then boat transfer to the island. Air freight for samples and small urgent items.
The same 500 sq ft minimum applies on export.
| Any finish | 500 sq ft, about 46 sq m |
|---|
A panel is 1200 x 600 mm, which is 0.72 sq m or about 7.75 sq ft, so the minimum is roughly 65 panels.
06 / Read this first
What we will tell you that a reseller will not
-
The wrong product for the problem
At 20 mm it is a mid and high frequency absorber, not a bass solution, and painting it heavily will close the surface and reduce what it does. If a room needs low frequency control, depth or a cavity has to come from somewhere.
-
A number chased without a measurement
If nobody has measured the room or set a target, the specification is a guess with a decimal point in it. We will ask for the target before we quote the quantity.
-
Suppliers who imply a Maldives presence
Ask any supplier where the material is made and who carries the warranty. We make it at Palwal in Haryana and we say so on every page, including this one.
Maldives: questions we are actually asked
Are these wood wool acoustic panels made in Maldives?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Maldives as the manufacturer rather than through a dealer. Made at our own plant in India and shipped into Malé, then transferred by boat to the island. You buy at factory prices with one consistent batch across the order.
What decides the specification for a Maldives project?
Landing craft transfer means handling, spray and limited lifting. We wrap, brace and size pallets for that rather than for a truck dock. PET felt does not absorb moisture, rot or corrode. On an atoll that is not a preference, it is the only sensible choice. Those two things move the build-up far more than the panel figure does.
Will this material last in the Maldives climate?
Maldives is warm and humid through most of the year, with a long wet season. Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them. The failure we design against here is mould, sagging fabric finishes and swelling in timber.
How quickly can material reach a site in Maldives?
ships from: Palwal, Haryana, India, arrives at: Malé, then boat transfer to the island, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
When are wood wool acoustic panels the wrong purchase?
At 20 mm it is a mid and high frequency absorber, not a bass solution, and painting it heavily will close the surface and reduce what it does. If a room needs low frequency control, depth or a cavity has to come from somewhere.
What is the minimum order and how is it packed?
The same 500 sq ft minimum applies on export. Any finish, 500 sq ft, about 46 sq m. A panel is 1200 x 600 mm, which is 0.72 sq m or about 7.75 sq ft, so the minimum is roughly 65 panels. Palletised flat, edge protected. Boards are rigid but the edges chip, so they travel protected.
Next step
Tell us the room, we will tell you the build-up
We quote from drawings, not from a square foot rate. Send a plan and the section through the critical wall or ceiling and you will get something you can actually build from.