For projects in Malaysia
Home theatre soundproofing and acoustics in Malaysia
Serious equipment in a room with no isolation plan. The complaint is almost never the speakers. It is bass leaving the room and an untreated box making the system sound worse than it is. Concrete frame condominiums and terrace houses with hard tile floors throughout, sharing walls and slabs.
- Containment
- Bass through the wall, floor and door. Mass and decoupling, with the door usually the weakest point.
- Low frequency inside
- Corner absorption with depth, before any surface treatment.
- Reflections
- Side wall and ceiling first reflection points at the seating position.
- Quote
- From a plan and a section, within 48 hours
01 / What it is
The material, and what it actually does on a Malaysia job
Serious equipment in a room with no isolation plan. The complaint is almost never the speakers. It is bass leaving the room and an untreated box making the system sound worse than it is.
Concrete frame condominiums and terrace houses with hard tile floors throughout, sharing walls and slabs.
Work reaching us from Malaysia is mostly electronics and manufacturing plants, hotels and resorts, offices, hospitals, schools, studios.
- Plants and clean areas Manufacturing floors need enclosure at the machine, and measurement rooms need a genuinely low background before any result means anything.
- Tropical humidity year round PET felt does not absorb moisture, shed fibre or feed mould. That decides whether a ceiling is still sound in five years.
- Cooling loads never stop Continuous mechanical plant close to occupied space causes more complaints than the rooms themselves.
- Containment Bass through the wall, floor and door. Mass and decoupling, with the door usually the weakest point.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for home theatre soundproofing are on the main product page. This page covers what that means for a project in Malaysia.
02 / The build-up
The stack, in the order it is installed
-
Layer 1
SoundBlanket mass loaded vinyl
A limp, high density sheet that adds mass to a partition, floor or duct without adding depth. In Malaysia, split units and VRF with condensers on balconies and in air wells, running at full load all year.
Wall, decoupled. Independent stud, membrane between the boards, cavity absorption, two boards. The membrane is one part of a system, never the whole answer.
-
Layer 2
Soundproofing materials
The blocking side of the range taken together: mass loaded vinyl, resilient layers, cavity absorption and the build-ups they belong in. In Malaysia, mosques, temples, churches and function halls are tall hard volumes carrying amplified speech and music.
Independent leaf. A second wall that does not touch the first. Nothing else comes close for the money.
-
Layer 3
Soundproof curtains
A layered curtain with a mass loaded vinyl core, used where an opening has to stay an opening. In Malaysia, classrooms are hard and naturally ventilated with open corridors and large assembly halls.
Double layer at a doorway. Two curtains with an air gap where a single layer will not reach the target.
If you are specifying for a Malaysia project, we can give you a section, a BOQ and the honest limits of each layer. See how we support architects.
03 / In this market
What decides the build-up in Malaysia
- Plants and clean areas
Manufacturing floors need enclosure at the machine, and measurement rooms need a genuinely low background before any result means anything.
- Tropical humidity year round
PET felt does not absorb moisture, shed fibre or feed mould. That decides whether a ceiling is still sound in five years.
- Cooling loads never stop
Continuous mechanical plant close to occupied space causes more complaints than the rooms themselves.
- Two well served ports
Port Klang and Penang both run frequently from India, so we can route to whichever suits your site.
- The housing stock
Concrete frame condominiums and terrace houses with hard tile floors throughout, sharing walls and slabs.
04 / Room by room
Space by space, for Malaysia briefs
-
Containment
Bass through the wall, floor and door. Mass and decoupling, with the door usually the weakest point. Manufacturing floors need enclosure at the machine, and measurement rooms need a genuinely low background before any result means anything.
- SoundBlanket mass loaded vinyl, 2100 kg per cubic metre
- Soundproofing materials, 1800 x 900 x 20 mm, 100 kg per cubic metre, NRC 0.85
- Acoustic carpet and rugs, High density polyester
-
Low frequency inside
Corner absorption with depth, before any surface treatment. PET felt does not absorb moisture, shed fibre or feed mould. That decides whether a ceiling is still sound in five years.
- SoundBlanket mass loaded vinyl, STC 30, 5.25 kg per sq m
- Soundproofing materials, Mass, then decoupling, then cavity absorption, then sealing
- Acoustic carpet and rugs, Felt
-
Reflections
Side wall and ceiling first reflection points at the seating position. Continuous mechanical plant close to occupied space causes more complaints than the rooms themselves.
- SoundBlanket mass loaded vinyl, STC 34, 8.4 kg per sq m
- Soundproofing materials, ASTM E90 for the barrier, ASTM C423 for the absorber
- Acoustic carpet and rugs, 64 sq ft per pack
Designers get colour, pattern and CNC options with the absorption figure attached to each. See how we work with interior designers.
04 / Conditions
Durability in Malaysia, before acoustics is discussed
Malaysia is warm and humid through most of the year, with a long wet season, and that narrows the material list before acoustics is discussed.
Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them.
The failure we design against here is mould, sagging fabric finishes and swelling in timber.
If a consultant has set the target, we will quote against their figures rather than ours, and stay out of the scope they own. More on working with acoustic consultants.
06 / Read this first
Where this kind of project usually fails
-
Foam on the walls as a soundproofing measure
This is the one that comes back as a second fit-out rather than a snag.
-
A standard door on a room built to hold bass
A 6 mm undercut under a door leaves a hole the size of a brick. The wall around it is then decorative.
-
Treating before the room is sealed
A 6 mm undercut under a door leaves a hole the size of a brick. The wall around it is then decorative.
-
Treating it as a generic Malaysia job
Manufacturing floors need enclosure at the machine, and measurement rooms need a genuinely low background before any result means anything.
05 / Logistics
Getting it to Malaysia, with real dates
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Port Klang or Penang, then road to site |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Port Klang |
| Support | Drawings, build-ups, BOQ and material that arrives complete |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Sea freight into Port Klang or Penang, then road to site. Air freight for samples and urgent quantities.
Questions from Malaysia projects
What makes home theatre soundproofing and acoustics different in Malaysia?
Concrete frame condominiums and terrace houses with hard tile floors throughout, sharing walls and slabs. Manufacturing floors need enclosure at the machine, and measurement rooms need a genuinely low background before any result means anything.
Where should the budget go first on a Malaysia project?
Containment. Bass through the wall, floor and door. Mass and decoupling, with the door usually the weakest point. Low frequency inside. Corner absorption with depth, before any surface treatment.
Do you have an office or installation team in Malaysia?
No. We manufacture in India and supply into Malaysia. We give you drawings, build-ups, a BOQ and material that arrives complete, and we will tell you plainly when a job needs a local contractor we cannot be.
How does material get to a Malaysia site?
ships from: Palwal, Haryana, India, arrives at: Port Klang or Penang, then road to site, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
What goes wrong most often on this kind of project?
Foam on the walls as a soundproofing measure. A standard door on a room built to hold bass.
What do you need from us to quote?
A plan, a section through the critical partition or ceiling, and what the room is for. From that we can give a build-up and a BOQ rather than a price per square foot.
Next step
Send a plan and a section, get a real build-up
We quote from drawings, not from a square foot rate. Send a plan and the section through the critical wall or ceiling and you will get something you can actually build from.