Manufactured in India, supplied in Malaysia
Soundproof curtains in Malaysia
We manufacture soundproof curtains at our own plant at Palwal in Haryana, India, and supply them into Malaysia. Made at our own plant in India and shipped into Port Klang or Penang, both well served from western India.
- Build-up
- 800 GSM face, foam, 3 mm SoundBlanket MLV core, foam, 800 GSM face
- Total thickness
- 10 to 12 mm
- Weight
- 5.5 kg per sq m
- Reduction
- Up to 30 dB
- STC
- 30
- Lead time
- Made to size
- Minimum order
- 5 pieces
- ASTM E90
- Standard sizes, 8 x 4 ft and 5 x 4 ft
- Made at our own plant, Palwal, Haryana, India
We make this ourselves and ship it to you. No local branch, no borrowed certifications, no dealer margin. One batch across the whole order, and an honest answer when the product is wrong for the problem.
01 / What it is
The product, described honestly, for a Malaysia brief
A layered curtain with a mass loaded vinyl core, used where an opening has to stay an opening. It is the answer for a doorway, a stage, a partition that must move, not a substitute for a wall.
Work reaching us from Malaysia is mostly electronics and manufacturing plants, hotels and resorts, offices, hospitals, schools, studios.
Concrete frame condominiums and terrace houses with hard tile floors throughout, sharing walls and slabs.
- Full height with return Curtain taken floor to soffit with a side return and an overlap, because the gap is what leaks, not the fabric.
- Track with a seal Ceiling track plus a floor seal or drape, so the perimeter is closed when it is drawn.
- Double layer at a doorway Two curtains with an air gap where a single layer will not reach the target.
- What it will not do A curtain is only as good as its perimeter. Hung short, hung flat against a frame, or with a gap at the side, it will measure nothing like the figure on the sheet.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for soundproof curtains are on the main product page. This page covers what that means for a project in Malaysia.
02 / Specification
One specification sheet, the same in every market
The specification below is the same everywhere we supply, because a specification that changed by city would not be a specification. What changes is which grade and build-up is the right buy, and that is what the rest of this page is about.
- Standard5.5 kg per sq m. Openings, stages, temporary partitions
| Build-up | 800 GSM face, foam, 3 mm SoundBlanket MLV core, foam, 800 GSM face |
|---|---|
| Total thickness | 10 to 12 mm |
| Weight | 5.5 kg per sq m |
| Reduction | Up to 30 dB |
| STC | 30 |
| Test standard | ASTM E90 |
| Standard sizes | 8 x 4 ft and 5 x 4 ft |
Consultants get the raw data, not a sales sheet. That is the whole of our side of the job, and it is set out under working with acoustic consultants.
03 / What drives the brief
The Malaysia conditions that change the answer
- Tropical humidity year round
PET felt does not absorb moisture, shed fibre or feed mould. That decides whether a ceiling is still sound in five years.
- Plants and clean areas
Manufacturing floors need enclosure at the machine, and measurement rooms need a genuinely low background before any result means anything.
- Cooling loads never stop
Continuous mechanical plant close to occupied space causes more complaints than the rooms themselves.
- Two well served ports
Port Klang and Penang both run frequently from India, so we can route to whichever suits your site.
- The housing stock
Concrete frame condominiums and terrace houses with hard tile floors throughout, sharing walls and slabs.
- The studio and content scene
A growing content and music sector working out of shop lots and commercial floors with thin partitions.
Architects working in Malaysia usually need the build-up before the product. We will draw the section and mark what does the work. See how we support architects.
04 / Climate and durability
What the Malaysia climate rules in and rules out
Malaysia is warm and humid through most of the year, with a long wet season, and that narrows the sensible material list before acoustics is even discussed.
Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them.
The risk we design against here is mould, sagging fabric finishes and swelling in timber.
If the visual is fixed and the room still has to perform, that is a solvable problem and a conversation worth having early. See how we work with interior designers.
05 / Supply
Getting it to Malaysia, with real dates
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Port Klang or Penang, then road to site |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Port Klang |
| Packing | Rolled and bagged with track and fixings listed separately. |
| Lead time | Made to size. Confirmed at quote. |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Sea freight into Port Klang or Penang, then road to site. Air freight for samples and urgent quantities.
The same 5 piece minimum applies on export.
| Any size | 5 pieces |
|---|
Curtains are made to size, so the minimum is counted in pieces rather than area.
06 / Read this first
Where this goes wrong, said plainly
-
The wrong product for the problem
A curtain is only as good as its perimeter. Hung short, hung flat against a frame, or with a gap at the side, it will measure nothing like the figure on the sheet. We quote the detail, not just the fabric.
-
A number chased without a measurement
If nobody has measured the room or set a target, the specification is a guess with a decimal point in it. We will ask for the target before we quote the quantity.
-
Local approvals that nobody actually holds
We hold no Malaysia certification and we will not borrow one. The test data we publish is ours, and we will send the reports rather than describe them.
Malaysia: questions we are actually asked
Where are the soundproof curtains you supply to Malaysia actually made?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Malaysia as the manufacturer rather than through a dealer. Made at our own plant in India and shipped into Port Klang or Penang, both well served from western India. You buy at factory prices with one consistent batch across the order.
What decides the specification for a Malaysia project?
Manufacturing floors need enclosure at the machine, and measurement rooms need a genuinely low background before any result means anything. PET felt does not absorb moisture, shed fibre or feed mould. That decides whether a ceiling is still sound in five years. Those two things move the build-up far more than the panel figure does.
How does the Malaysia climate affect this product?
Malaysia is warm and humid through most of the year, with a long wet season. Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them. The failure we design against here is mould, sagging fabric finishes and swelling in timber.
How does an order actually travel to Malaysia?
ships from: Palwal, Haryana, India, arrives at: Port Klang or Penang, then road to site, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
When are soundproof curtains the wrong purchase?
A curtain is only as good as its perimeter. Hung short, hung flat against a frame, or with a gap at the side, it will measure nothing like the figure on the sheet. We quote the detail, not just the fabric.
How is the order packed and what is the minimum?
The same 5 piece minimum applies on export. Any size, 5 pieces. Curtains are made to size, so the minimum is counted in pieces rather than area. Rolled and bagged with track and fixings listed separately.
Next step
Send a plan and a section, get a real build-up
One drawing gets you a proper answer. Build-up, quantities, a delivered date, and an honest note on anything we think is the wrong approach.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for soundproof curtains are on the main product page. This page covers what that means for a project in Malaysia.