Manufactured in India, supplied in Malaysia
Wooden slat acoustic panels in Malaysia
We manufacture wooden slat acoustic panels at our own plant at Palwal in Haryana, India, and supply them into Malaysia. Made at our own plant in India and shipped into Port Klang or Penang, both well served from western India.
- Substrate
- MDF, FR MDF, HDF or HDHMR
- Patterns
- 13-3, 14-2, 28-4 and 59-5
- Panel sizes
- 2440 x 192 mm and 2440 x 128 mm
- Thickness
- 14, 16 and 18 mm
- Coverage
- 96 sq ft per unit
- Lead time
- Longer than felt
- Minimum order
- 500 sq ft, about 46 sq m
- EN 13501-1 Class B s1 d0 on FR substrate
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
Manufacturer, not reseller. We hold no local approvals and will not imply we do. You get the price the factory quotes, material that matches across a large order, and advice that sometimes talks you out of a purchase.
01 / The material
What you are buying, and what it fixes in Malaysia
Timber slats on an acoustic backing. The slats are the finish and the rhythm, the backing does the absorbing. Used where the room has to look considered rather than treated.
Work reaching us from Malaysia is mostly electronics and manufacturing plants, hotels and resorts, offices, hospitals, schools, studios.
Concrete frame condominiums and terrace houses with hard tile floors throughout, sharing walls and slabs.
- Slats on felt backing The standard. Absorption comes from the backing behind the gaps, so the slat gap ratio is an acoustic decision, not only a visual one.
- Slats on a cavity Backing plus an air gap behind moves absorption lower, which matters in music rooms.
- Feature wall only Slats where they are seen, plain felt elsewhere, to hold the budget where it shows.
- What it will not do A tight slat pattern looks denser but absorbs less, because the open area is what lets sound reach the backing. If the visual you want and the RT target you need pull apart, we will tell you which one the pattern is serving.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for wooden slat panels are on the main product page. This page covers what that means for a project in Malaysia.
02 / Specification
The numbers, and they do not move by city
These figures are published and they do not move. The thing worth arguing about is not the number on the sheet, it is which grade and which build-up suits the room you are treating.
- MDFStandard. Dry interiors, general commercial
- FR MDFFire rated. Public buildings and anywhere the specification calls for a class
- HDHMRMoisture resistant. Humid climates and rooms that see damp
| Substrate | MDF, FR MDF, HDF or HDHMR |
|---|---|
| Patterns | 13-3, 14-2, 28-4 and 59-5 |
| Panel sizes | 2440 x 192 mm and 2440 x 128 mm |
| Thickness | 14, 16 and 18 mm |
| Coverage | 96 sq ft per unit |
| Fire class | EN 13501-1 Class B s1 d0 on FR substrate |
If a consultant has set the target, we will quote against their figures rather than ours, and stay out of the scope they own. More on working with acoustic consultants.
03 / In this market
What the buildings in Malaysia do to the specification
- Plants and clean areas
Manufacturing floors need enclosure at the machine, and measurement rooms need a genuinely low background before any result means anything.
- Tropical humidity year round
PET felt does not absorb moisture, shed fibre or feed mould. That decides whether a ceiling is still sound in five years.
- Cooling loads never stop
Continuous mechanical plant close to occupied space causes more complaints than the rooms themselves.
- Two well served ports
Port Klang and Penang both run frequently from India, so we can route to whichever suits your site.
- Assembly and performance rooms
Mosques, temples, churches and function halls are tall hard volumes carrying amplified speech and music.
If you are specifying for a Malaysia project, we can give you a section, a BOQ and the honest limits of each layer. See how we support architects.
04 / Climate
Durability in Malaysia, before acoustics is discussed
Malaysia is warm and humid through most of the year, with a long wet season, and that narrows the sensible material list before acoustics is even discussed.
Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them.
The risk we design against here is mould, sagging fabric finishes and swelling in timber.
Interior designers tend to arrive with the look already decided. We will tell you which finish gets there without losing the acoustics. See how we work with interior designers.
05 / Route to site
What the route into Malaysia actually looks like
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Port Klang or Penang, then road to site |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Port Klang |
| Packing | Braced crates, slats supported along their length. Timber moves, so crates are kept flat and dry. |
| Lead time | Longer than felt. Confirmed against the pattern and substrate at quote stage. |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Sea freight into Port Klang or Penang, then road to site. Air freight for samples and urgent quantities.
The same 500 sq ft minimum applies on export.
| Any specification | 500 sq ft, about 46 sq m |
|---|
One unit covers 96 sq ft, so the minimum is a little over five units. Substrate, slat pattern, width and thickness can be mixed inside the same order.
06 / Before you buy
The things worth knowing before you place the order
-
The wrong product for the problem
A tight slat pattern looks denser but absorbs less, because the open area is what lets sound reach the backing. If the visual you want and the RT target you need pull apart, we will tell you which one the pattern is serving.
-
Coverage bought instead of a target
Lining every surface is a purchase, not a result. We would rather calculate the area against a reverberation target and sell you less of it.
-
A claim of being local to Malaysia
We manufacture in India and supply here. We do not run an office in this city and we will not pretend to, because you would find out on the first site visit.
Malaysia: questions we are actually asked
Do you manufacture wooden slat acoustic panels in Malaysia?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Malaysia as the manufacturer rather than through a dealer. Made at our own plant in India and shipped into Port Klang or Penang, both well served from western India. You buy at factory prices with one consistent batch across the order.
What decides the specification for a Malaysia project?
Manufacturing floors need enclosure at the machine, and measurement rooms need a genuinely low background before any result means anything. PET felt does not absorb moisture, shed fibre or feed mould. That decides whether a ceiling is still sound in five years. Those two things move the build-up far more than the panel figure does.
Does Malaysia weather shorten the life of this material?
Malaysia is warm and humid through most of the year, with a long wet season. Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them. The failure we design against here is mould, sagging fabric finishes and swelling in timber.
How does an order actually travel to Malaysia?
ships from: Palwal, Haryana, India, arrives at: Port Klang or Penang, then road to site, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Where do wooden slat acoustic panels fail to help?
A tight slat pattern looks denser but absorbs less, because the open area is what lets sound reach the backing. If the visual you want and the RT target you need pull apart, we will tell you which one the pattern is serving.
What quantity do we have to order, and in what packaging?
The same 500 sq ft minimum applies on export. Any specification, 500 sq ft, about 46 sq m. One unit covers 96 sq ft, so the minimum is a little over five units. Substrate, slat pattern, width and thickness can be mixed inside the same order. Braced crates, slats supported along their length. Timber moves, so crates are kept flat and dry.
Next step
Send the drawings, get a straight answer
We quote from drawings, not from a square foot rate. Send a plan and the section through the critical wall or ceiling and you will get something you can actually build from.