Manufactured in India, supplied in Italy
Acoustic foam and BassBloc in Italy
We manufacture acoustic foam and BassBloc at our own plant at Palwal in Haryana, India, and supply them into Italy. Made at our own plant in India, shipped in container loads into Genoa, La Spezia or Trieste, and specified against your drawings before anything leaves the factory.
- BassBloc size
- 1800 x 900 mm
- BassBloc thickness
- 20 mm
- BassBloc density
- 100 kg per cubic metre
- Effective range
- 100 to 500 Hz
- BassBloc NRC
- 0.85
- Lead time
- 4 to 7 working days
- Minimum order
- From 200 sq ft
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
- Test reports sent on request, not just quoted
Manufacturer, not reseller. We hold no local approvals and will not imply we do. You get the price the factory quotes, material that matches across a large order, and advice that sometimes talks you out of a purchase.
01 / What it is
The product, described honestly, for a Italy brief
Open cell foam shapes for high frequency control, and BassBloc, a high density absorber built for the low mid range where ordinary foam does nothing.
Work reaching us from Italy is mostly apartments, hotels, restaurants, showrooms, offices, studios, clinics, schools.
Masonry palazzi and later concrete blocks, with terrazzo and tile floors and shared courtyards that carry sound between flats.
- Corner loading Low frequency energy collects in corners, so absorber in the corners does more than the same area spread across a wall.
- First reflection points Mirror trick placement on side walls and ceiling, which is a handful of panels rather than a lined room.
- Behind a fabric frame Where the room has to look finished, absorber inside a frame rather than foam on show.
- What it will not do Thin foam on a wall is the most over-sold product in this industry. It controls flutter and nothing below it.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for acoustic foam and bass traps are on the main product page. This page covers what that means for a project in Italy.
02 / Specification sheet
Published specification, identical wherever we ship it
These figures are published and they do not move. The thing worth arguing about is not the number on the sheet, it is which grade and which build-up suits the room you are treating.
- Foam wedge and pyramidLow density. Flutter and high frequency only
- BassBloc100 kg per cubic metre. Low mid absorption, control rooms, live rooms
| BassBloc size | 1800 x 900 mm |
|---|---|
| BassBloc thickness | 20 mm |
| BassBloc density | 100 kg per cubic metre |
| Effective range | 100 to 500 Hz |
| BassBloc NRC | 0.85 |
On a Italy job with a consultant involved, our part is material that matches the submitted data. See working with acoustic consultants.
03 / On the ground
The Italy conditions that change the answer
- Hard shells, long reverberation
Masonry, marble, terrazzo and plaster reflect almost everything. A room can measure fine on paper and still be unusable for speech until something absorbent goes on the ceiling.
- Heritage limits what you can touch
In a protected building you often cannot alter the structure or the facade, so the work has to be internal, shallow and ideally reversible. That rules out most thick framed systems.
- Condominio living
Shared stairwells, party walls and slabs between flats mean neighbour complaints arrive fast. Mass plus a resilient break does more here than any surface treatment.
- Appearance is half the brief
Italian clients look at the panel before they listen to it. We supply consistent colour across a full order and finishes that survive a design review.
- The housing stock
Masonry palazzi and later concrete blocks, with terrazzo and tile floors and shared courtyards that carry sound between flats.
- The studio and content scene
Studios go into older buildings with good mass and terrible surfaces, so the room treatment carries the result.
If you are specifying for a Italy project, we can give you a section, a BOQ and the honest limits of each layer. See how we support architects.
04 / Climate and durability
Durability in Italy, before acoustics is discussed
Italy is hot dry summers and mild wet winters, and that narrows the sensible material list before acoustics is even discussed.
The swing between a dry summer and a wet winter moves timber. PET felt is dimensionally stable across that swing; slat panels want a stable substrate and a ventilated fixing.
The risk we design against here is seasonal movement in timber and winter damp in unheated stock.
If the visual is fixed and the room still has to perform, that is a solvable problem and a conversation worth having early. See how we work with interior designers.
05 / Route to site
How material reaches a Italy site
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Genoa, La Spezia or Trieste, then road to site |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Genoa |
| Packing | Compressed and boxed for foam, palletised flat for BassBloc. |
| Lead time | 4 to 7 working days. |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Sea freight into Genoa, La Spezia or Trieste, then road to site anywhere in the country. Air freight for samples and urgent quantities.
The same minimums apply on export.
| Acoustic foam | 200 sq ft, about 19 sq m |
|---|---|
| BassBloc | 300 sq ft, about 28 sq m |
| Bass traps | 10 pieces |
A BassBloc panel is 1800 x 900 mm, which is 1.62 sq m or about 17.4 sq ft, so the BassBloc minimum is roughly 17 panels.
06 / Before you buy
Four honest warnings before you buy
-
The wrong product for the problem
Thin foam on a wall is the most over-sold product in this industry. It controls flutter and nothing below it. If the complaint is boom, bass from a neighbour, or a room that sounds uneven at low frequency, foam is the wrong purchase and we will say so.
-
A number chased without a measurement
If nobody has measured the room or set a target, the specification is a guess with a decimal point in it. We will ask for the target before we quote the quantity.
-
A claim of being local to Italy
We manufacture in India and supply here. We do not run an office in this city and we will not pretend to, because you would find out on the first site visit.
07 / In projects
How it looks once it is installed
Italy: questions we are actually asked
Do you manufacture acoustic foam and BassBloc in Italy?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Italy as the manufacturer rather than through a dealer. Made at our own plant in India, shipped in container loads into Genoa, La Spezia or Trieste, and specified against your drawings before anything leaves the factory. You buy at factory prices with one consistent batch across the order.
What do you look at first on a Italy enquiry?
Masonry, marble, terrazzo and plaster reflect almost everything. A room can measure fine on paper and still be unusable for speech until something absorbent goes on the ceiling. In a protected building you often cannot alter the structure or the facade, so the work has to be internal, shallow and ideally reversible. That rules out most thick framed systems. Those two things move the build-up far more than the panel figure does.
Does Italy weather shorten the life of this material?
Italy is hot dry summers and mild wet winters. The swing between a dry summer and a wet winter moves timber. PET felt is dimensionally stable across that swing; slat panels want a stable substrate and a ventilated fixing. The failure we design against here is seasonal movement in timber and winter damp in unheated stock.
When would material land on a Italy site?
ships from: Palwal, Haryana, India, arrives at: Genoa, La Spezia or Trieste, then road to site, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Where do acoustic foam and BassBloc fail to help?
Thin foam on a wall is the most over-sold product in this industry. It controls flutter and nothing below it. If the complaint is boom, bass from a neighbour, or a room that sounds uneven at low frequency, foam is the wrong purchase and we will say so.
What quantity do we have to order, and in what packaging?
The same minimums apply on export. Acoustic foam, 200 sq ft, about 19 sq m. BassBloc, 300 sq ft, about 28 sq m. Bass traps, 10 pieces. A BassBloc panel is 1800 x 900 mm, which is 1.62 sq m or about 17.4 sq ft, so the BassBloc minimum is roughly 17 panels. Compressed and boxed for foam, palletised flat for BassBloc.
Next step
Tell us the room, we will tell you the build-up
We quote from drawings, not from a square foot rate. Send a plan and the section through the critical wall or ceiling and you will get something you can actually build from.