For projects in Hungary
Recording studio acoustics and soundproofing in Hungary
Two jobs that must not be confused: keeping the building out, and making the room honest inside. The first is mass and decoupling and has to be built first. The second is absorption and diffusion and can be tuned later. A strong film and music production sector using converted buildings with good mass and hard surfaces.
- Isolation
- A measured background level, agreed before anything is bought.
- Low frequency
- Corner and boundary absorption with real depth, not surface foam.
- Early reflections
- Controlled at the mix position, and only there.
- Quote
- From a plan and a section, within 48 hours
01 / The material
What this material is and where it earns its place in Hungary
Two jobs that must not be confused: keeping the building out, and making the room honest inside. The first is mass and decoupling and has to be built first. The second is absorption and diffusion and can be tuned later.
A strong film and music production sector using converted buildings with good mass and hard surfaces.
Work reaching us from Hungary is mostly automotive plants, offices and service centres, hotels, panel block housing, schools, hospitals.
- Landlocked, so plan the inland leg Koper then rail and road. We quote the sea leg and the inland leg separately so the programme runs on real dates.
- Automotive plant noise Presses, robots and conveyors are low frequency and structure-borne. Enclosure at the source rather than absorption on a far wall.
- Panel block housing Prefabricated concrete passes speech and footfall between flats through thin connected elements. Mass is the only reliable answer.
- Isolation A measured background level, agreed before anything is bought.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for studio soundproofing are on the main product page. This page covers what that means for a project in Hungary.
02 / The build-up
The stack, in the order it is installed
-
Layer 1
Acoustic foam and BassBloc
Open cell foam shapes for high frequency control, and BassBloc, a high density absorber built for the low mid range where ordinary foam does nothing. In Hungary, district heating and split units, with condensers in courtyards that reflect noise back into flats.
Behind a fabric frame. Where the room has to look finished, absorber inside a frame rather than foam on show.
-
Layer 2
SoundBlanket mass loaded vinyl
A limp, high density sheet that adds mass to a partition, floor or duct without adding depth. In Hungary, church buildings, concert halls and civic rooms are stone and plaster volumes with long decay.
Duct and plant wrap. Membrane wrapped over the duct with a decoupling layer beneath, sealed at every lap.
-
Layer 3
Soundproofing materials
The blocking side of the range taken together: mass loaded vinyl, resilient layers, cavity absorption and the build-ups they belong in. In Hungary, school buildings are hard surfaced with long corridors and gymnasiums serving as halls.
Floating floor. Resilient layer and deck, to break impact energy before it reaches the structure.
If you are specifying for a Hungary project, we can give you a section, a BOQ and the honest limits of each layer. See how we support architects.
03 / Local conditions
The Hungary conditions that change the answer
- Landlocked, so plan the inland leg
Koper then rail and road. We quote the sea leg and the inland leg separately so the programme runs on real dates.
- Automotive plant noise
Presses, robots and conveyors are low frequency and structure-borne. Enclosure at the source rather than absorption on a far wall.
- Panel block housing
Prefabricated concrete passes speech and footfall between flats through thin connected elements. Mass is the only reliable answer.
- Budapest conversions
Old buildings turned into offices and hotels, with tall rooms and hard plaster that hold sound far too long.
- The housing stock
Masonry blocks with timber floors in older stock and panel housing in concrete, both with hard finishes.
- The studio and content scene
A strong film and music production sector using converted buildings with good mass and hard surfaces.
04 / Room by room
Where the money goes on a Hungary project
-
Isolation
A measured background level, agreed before anything is bought. Koper then rail and road. We quote the sea leg and the inland leg separately so the programme runs on real dates.
- SoundBlanket mass loaded vinyl, 2100 kg per cubic metre
- Soundproofing materials, 1800 x 900 x 20 mm, 100 kg per cubic metre, NRC 0.85
- Soundproof curtains, 5.5 kg per sq m
-
Low frequency
Corner and boundary absorption with real depth, not surface foam. Presses, robots and conveyors are low frequency and structure-borne. Enclosure at the source rather than absorption on a far wall.
- SoundBlanket mass loaded vinyl, STC 30, 5.25 kg per sq m
- Soundproofing materials, Mass, then decoupling, then cavity absorption, then sealing
- Soundproof curtains, Up to 30 dB
-
Early reflections
Controlled at the mix position, and only there. Prefabricated concrete passes speech and footfall between flats through thin connected elements. Mass is the only reliable answer.
- SoundBlanket mass loaded vinyl, STC 34, 8.4 kg per sq m
- Soundproofing materials, ASTM E90 for the barrier, ASTM C423 for the absorber
- Soundproof curtains, 30
Designers get colour, pattern and CNC options with the absorption figure attached to each. See how we work with interior designers.
04 / Climate and durability
Why the climate in Hungary changes the material, not the target
Hungary is cool and damp, with long heating seasons and cold external walls, and that narrows the material list before acoustics is discussed.
Cold wall build-ups and long heating seasons mean interstitial condensation is a real risk behind any lining. PET felt is unaffected by damp air and will not feed mould where a fabric-faced mineral product would.
The failure we design against here is condensation behind linings in older, poorly insulated stock.
On a Hungary job with a consultant involved, our part is material that matches the submitted data. See working with acoustic consultants.
06 / Read this first
Six mistakes that turn into a second fit-out
-
Buying foam to solve an isolation problem
Small on the drawing, expensive on site, and almost always found after handover.
-
Treating the room before the shell is isolated
This is the one that comes back as a second fit-out rather than a snag.
-
Killing the room completely and calling it controlled
We would rather calculate the area and sell you less of it than line every surface and call it thorough.
-
Treating it as a generic Hungary job
Koper then rail and road. We quote the sea leg and the inland leg separately so the programme runs on real dates.
05 / Supply
Getting it to Hungary, with real dates
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Koper, then rail and road inland |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Koper, then rail |
| Support | Drawings, build-ups, BOQ and material that arrives complete |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Sea freight into Koper, then rail and road inland. Air freight for samples and urgent quantities.
Questions from Hungary projects
What makes recording studio acoustics and soundproofing different in Hungary?
A strong film and music production sector using converted buildings with good mass and hard surfaces. Koper then rail and road. We quote the sea leg and the inland leg separately so the programme runs on real dates.
Where should the budget go first on a Hungary project?
Isolation. A measured background level, agreed before anything is bought. Low frequency. Corner and boundary absorption with real depth, not surface foam.
Do you have an office or installation team in Hungary?
No. We manufacture in India and supply into Hungary. We give you drawings, build-ups, a BOQ and material that arrives complete, and we will tell you plainly when a job needs a local contractor we cannot be.
How does material get to a Hungary site?
ships from: Palwal, Haryana, India, arrives at: Koper, then rail and road inland, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
What goes wrong most often on this kind of project?
Buying foam to solve an isolation problem. Treating the room before the shell is isolated.
What do you need from us to quote?
A plan, a section through the critical partition or ceiling, and what the room is for. From that we can give a build-up and a BOQ rather than a price per square foot.
Next step
Send a plan and a section, get a real build-up
One drawing gets you a proper answer. Build-up, quantities, a delivered date, and an honest note on anything we think is the wrong approach.